All of lore.kernel.org
 help / color / mirror / Atom feed
From: Martin Husemann <martin@NetBSD.org>
To: u-boot@lists.u-boot-project.org
Subject: StarFive VisionFive 2: NVME not responding randomly
Date: Tue, 17 Nov 2026 14:29:23 +0100	[thread overview]
Message-ID: <avxWs2PzYcvPidNw@big-apple.aprisoft.de> (raw)

Hi folks,

I boot my StarFive VisionFive 2 from NVME usually, but "sometimes"
(which is actually qite often) u-boot does not recognize the NVME
and can't read the partition.

Full boot lo of a working boot below. When it doesn't work it
says:

[..]
USB XHCI 1.00
Bus xhci_pci: 2 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Working FDT set to ff6f4430
Hit any key to stop autoboot: 0
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
    <------- all normal untill here, now the difference starts:
** Invalid partition 1 **
Couldn't find partition nvme 0:1
** Invalid partition 1 **
Couldn't find partition nvme 0:1
Cannot persist EFI variables without system partition
** Invalid partition 1 **
Couldn't find partition nvme 0:1
** Invalid partition 1 **
Couldn't find partition nvme 0:1
** Booting bootflow '<NULL>' with efi_mgr
Loading Boot0000 'nvme 0' failed
EFI boot manager: Cannot load any image
Boot failed (err=-14)


I tried everything obvious: software reset, reset button, removing power for
a minute - nothing made a difference. Sometime later it just works again.

I can build a debug version, but would like to hear some hints what
debug stuff I should enable for that, or any hints where to look.

Thanks,

Martin

working boot:

U-Boot SPL 2026.10 (Nov 12 2026 - 10:42:43 +0100)
DDR version: dc2e84f0.
Trying to boot from SPI

OpenSBI v1.9
   ____                    _____ ____ _____
  / __ \                  / ____|  _ \_   _|
 | |  | |_ __   ___ _ __ | (___ | |_) || |
 | |  | | '_ \ / _ \ '_ \ \___ \|  _ < | |
 | |__| | |_) |  __/ | | |____) | |_) || |_
  \____/| .__/ \___|_| |_|_____/|____/_____|
        | |
        |_|

Platform Name               : StarFive VisionFive 2 v1.3B
Platform Features           : medeleg
Platform HART Count         : 4
Platform HART Protection    : pmp
Platform IPI Device         : aclint-mswi
Platform Timer Device       : aclint-mtimer @ 4000000Hz
Platform Console Device     : uart8250
Platform HSM Device         : ---
Platform PMU Device         : ---
Platform Reboot Device      : pm-reset
Platform Shutdown Device    : pm-reset
Platform Suspend Device     : ---
Platform CPPC Device        : ---
Firmware Base               : 0x40000000
Firmware Size               : 357 KB
Firmware RW Offset          : 0x40000
Firmware RW Size            : 101 KB
Firmware Heap Offset        : 0x4d000
Firmware Heap Size          : 49 KB (total), 0 KB (reserved), 15 KB (used), 32 KB (free)
Firmware Scratch Size       : 4096 B (total), 504 B (used), 3592 B (free)
Runtime SBI Version         : 3.0
Standard SBI Extensions     : rfnc,ipi,base,hsm,srst,pmu,dbcn,fwft,legacy,dbtr,sse,time
Experimental SBI Extensions : none

Domain0 Name                : root
Domain0 Boot HART           : 3
Domain0 HARTs               : 0x1*,0x2*,0x3*,0x4*
Domain0 Region00            : 0x0000000040040000-0x000000004005ffff M: (F,R,W) S/U: ()
Domain0 Region01            : 0x0000000040000000-0x000000004003ffff M: (F,R,X) S/U: ()
Domain0 Region02            : 0x0000000010000000-0x0000000010000fff M: (I,R,W) S/U: (R,W)
Domain0 Region03            : 0x0000000002000000-0x000000000200ffff M: (I,R,W) S/U: ()
Domain0 Region04            : 0x000000000c000000-0x000000000fffffff M: (I,R,W) S/U: (R,W)
Domain0 Region05            : 0x0000000000000000-0xffffffffffffffff M: () S/U: (R,W,X)
Domain0 Next Address        : 0x0000000040200000
Domain0 Next Arg1           : 0x00000000402e5628
Domain0 Next Mode           : S-mode
Domain0 SysReset            : yes
Domain0 SysSuspend          : yes

Boot HART ID                : 3
Boot HART Domain            : root
Boot HART Priv Version      : v1.11
Boot HART Base ISA          : rv64imafdcbx
Boot HART ISA Extensions    : zihpm,sdtrig,f,d
Boot HART PMP Count         : 8
Boot HART PMP Granularity   : 12 bits
Boot HART PMP Address Bits  : 34
Boot HART MHPM Info         : 2 (0x00000018)
Boot HART Debug Triggers    : 8 triggers
Boot HART MIDELEG           : 0x0000000000000222
Boot HART MEDELEG           : 0x000000000000b109


U-Boot 2026.10 (Nov 12 2026 - 10:42:43 +0100)

CPU:   sifive,u74-mc
Model: StarFive VisionFive 2 v1.3B
DRAM:  8 GiB
Core:  159 devices, 30 uclasses, devicetree: board
WDT:   Not starting watchdog@13070000
MMC:   mmc@16010000: 0, mmc@16020000: 1
Loading Environment from SPIFlash...\rSF: Detected gd25lq128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

StarFive EEPROM format v2

--------EEPROM INFO--------
Vendor : StarFive Technology Co., Ltd.
Product full SN: VF7110B1-2253-D008E000-00004536
data version: 0x2
PCB revision: 0xb2
BOM revision: A
Ethernet MAC0 address: 6c:cf:39:00:46:cc
Ethernet MAC1 address: 6c:cf:39:00:46:cd
--------EEPROM INFO--------

In:    serial@10000000
Out:   serial@10000000
Err:   serial@10000000
Net:   eth0: ethernet@16030000, eth1: ethernet@16040000
starting USB...
USB XHCI 1.00
Bus xhci_pci: 2 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Working FDT set to ff6f4430
^[[2K\rHit any key to stop autoboot: 2^[[2K\rHit any key to stop autoboot: 0
StarFive # nvme detail
Blk device 0: Optional Admin Command Support:
	Namespace Management/Attachment: no
	Firmware Commit/Image download: yes
	Format NVM: yes
	Security Send/Receive: yes
Blk device 0: Optional NVM Command Support:
	Reservation: yes
	Save/Select field in the Set/Get features: no
	Write Zeroes: yes
	Dataset Management: yes
	Write Uncorrectable: yes
Blk device 0: Format NVM Attributes:
	Support Cryptographic Erase: yes
	Support erase a particular namespace: Yes
	Support format a particular namespace: No
Blk device 0: LBA Format Support:
Blk device 0: End-to-End DataProtect Capabilities:
	As last eight bytes: No
	As first eight bytes: No
	Support Type3: No
	Support Type2: No
	Support Type1: No
Blk device 0: Metadata capabilities:
	As part of a separate buffer: No
	As part of an extended data LBA: No
StarFive # nvme info
Device 0: Vendor: 0x144d Rev: 5B2QGXA7 Prod: S5GYNX0T302900W     
            Type: Hard Disk
            Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)
StarFive # nvme part
Partition Map for nvme device 0  --   Partition Type: EFI

Part	Start LBA	End LBA		Name
	Attributes
	Type GUID
	Partition GUID
  1	0x00000040	0x0002003f	"NvmeEFI"
	attrs:	0x0000000000000000
	type:	c12a7328-f81f-11d2-ba4b-00a0c93ec93b
		(EFI System Partition)
	guid:	f0fa7669-f18e-4335-9267-9bee56f2db5f
  2	0x00020040	0x0142003f	"NvmeSwap"
	attrs:	0x0000000000000000
	type:	49f48d32-b10e-11dc-b99b-0019d1879648
		(49f48d32-b10e-11dc-b99b-0019d1879648)
	guid:	7f8fc315-f7e6-467a-8811-79c272b1e331
  3	0x01420040	0x3a38600e	"NvmeRoot"
	attrs:	0x0000000000000000
	type:	49f48d5a-b10e-11dc-b99b-0019d1879648
		(49f48d5a-b10e-11dc-b99b-0019d1879648)
	guid:	689f41fa-13d8-43c9-b409-4acddeec0476
StarFive #

(and it would have booted from the EFI partition hapilly if I hadn't 
interrupted it here)

             reply	other threads:[~2026-11-17 13:29 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-17 13:29 Martin Husemann [this message]
2026-11-18  7:55 ` StarFive VisionFive 2: NVME not responding randomly E Shattow
2026-11-18  8:38   ` Martin Husemann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=avxWs2PzYcvPidNw@big-apple.aprisoft.de \
    --to=martin@netbsd.org \
    --cc=u-boot@lists.u-boot-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.