From mboxrd@z Thu Jan 1 00:00:00 1970 From: Adrian Hunter Subject: Re: [PATCH V4 4/7] mmc: sdhci: add 32-bit block count support for v4 mode Date: Tue, 14 Aug 2018 14:40:00 +0300 Message-ID: References: <1532340508-8749-5-git-send-email-zhang.chunyan@linaro.org> <1532400671-23429-1-git-send-email-zhang.chunyan@linaro.org> <3e586922-c5e8-fb3c-233e-06836f4dad48@intel.com> <598422fd0106427c85945baf1e1f1548@SHMBX02.spreadtrum.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <598422fd0106427c85945baf1e1f1548@SHMBX02.spreadtrum.com> Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: =?UTF-8?B?SmFzb24gV3UgKOWQtOmcgeeIvSk=?= , Chunyan Zhang Cc: Chunyan Zhang , Ulf Hansson , "linux-mmc@vger.kernel.org" , Linux Kernel Mailing List , Orson Zhai , Baolin Wang , =?UTF-8?B?QmlsbG93cyBXdSAo5q2m5rSq5rabKQ==?= List-Id: linux-mmc@vger.kernel.org On 07/08/18 04:58, Jason Wu (吴霁爽) wrote: >   > > According the information of following picture, in this case I think, we > just have 2 choice in sdio v4.1: > > 1 do not define SDHCI_AUTO_CMD23: argument of cmd23 will define in register > 0x8(Argument register) That would only need to be done for requests that use the upper bits. i.e. Perhaps hook host->mmc_host_ops->request() and check if sbc argument is ok. Then toggle SDHCI_AUTO_CMD23 accordingly. > > 2 or define SDHCI_USE_ADMA: block count of cmd18/28 will be get in “Command > Descriptor for SD Mod”of ADMA. And block cnt register will be used as > parameter of auto cmd23. > > -----Original Message----- > From: Chunyan Zhang [mailto:zhang.lyra@gmail.com] > Sent: Monday, August 06, 2018 7:29 PM > To: Adrian Hunter > Cc: Chunyan Zhang; Ulf Hansson; linux-mmc@vger.kernel.org; Linux Kernel > Mailing List; Orson Zhai; Baolin Wang; Billows Wu (武洪涛); Jason Wu (吴霁爽) > Subject: Re: [PATCH V4 4/7] mmc: sdhci: add 32-bit block count support for > v4 mode > >   > > Hi Adrian, > >   > > On 30 July 2018 at 21:05, Adrian Hunter > wrote: > >> On 24/07/18 05:51, Chunyan Zhang wrote: > >>> Host Controller Version 4.10 re-defines SDMA System Address register > >>> as 32-bit Block Count for v4 mode, and SDMA uses ADMA System Address > >>> register (05Fh-058h) instead if v4 mode is enabled. Also when using > >>> 32-bit block count, 16-bit block count register need to be set to > >>> zero. > >>>  > >>> Signed-off-by: Chunyan Zhang > > >>> --- > >>>  drivers/mmc/host/sdhci.c | 14 +++++++++++++-  > >>> drivers/mmc/host/sdhci.h |  1 + > >>>  2 files changed, 14 insertions(+), 1 deletion(-) > >>>  > >>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > >>> index 920d8ec..c272a2b 100644 > >>> --- a/drivers/mmc/host/sdhci.c > >>> +++ b/drivers/mmc/host/sdhci.c > >>> @@ -1070,7 +1070,19 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) > >>>       /* Set the DMA boundary value and block size */ > >>>       sdhci_writew(host, SDHCI_MAKE_BLKSZ(host->sdma_boundary, data->blksz), > >>>                    SDHCI_BLOCK_SIZE); > >>> -     sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT); > >>> + > >>> +     /* > >>> +      * For Version 4.10 onwards, if v4 mode is enabled, 16-bit Block Count > >>> +      * register need to be set to zero, 32-bit Block Count register would > >>> +      * be selected. > >>> +      */ > >>> +     if (host->version >= SDHCI_SPEC_410 && host->v4_mode) { > >>> +             if (sdhci_readw(host, SDHCI_BLOCK_COUNT)) > >>> +                     sdhci_writew(host, 0, SDHCI_BLOCK_COUNT); > >>> +             sdhci_writew(host, data->blocks, SDHCI_32BIT_BLK_CNT); > >>  > >> So this is also SDHCI_ARGUMENT2 which is why there is a conflict with > >> auto-CMD23.  We need to write SDHCI_32BIT_BLK_CNT only once, but also > >> cater for eMMC which uses the CMD23 argument for more than just block count. > >>  > >   > > What you would suggest on how should we change here? > >   > > I've double checked with the hardware fellow within the company, the sd host > controller v4 (on our platform at least) would  use this register as block > count only, that's saying that it would not deal with the flags (i.e. > reliable write and data tag) of CMD23. > >   > > Thanks, > > Chunyan > >   > >>> +     } else { > >>> +             sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT); > >>> +     } > >>>  } > >>>  > >>>  static inline bool sdhci_auto_cmd12(struct sdhci_host *host, diff > >>> --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index > >>> 23318ff..81aae07 100644 > >>> --- a/drivers/mmc/host/sdhci.h > >>> +++ b/drivers/mmc/host/sdhci.h > >>> @@ -28,6 +28,7 @@ > >>>  > >>>  #define SDHCI_DMA_ADDRESS    0x00 > >>>  #define SDHCI_ARGUMENT2              SDHCI_DMA_ADDRESS > >>> +#define SDHCI_32BIT_BLK_CNT  SDHCI_DMA_ADDRESS > >>>  > >>>  #define SDHCI_BLOCK_SIZE     0x04 > >>>  #define  SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz > >>> & 0xFFF)) > >>>  > >>  >