From: Tokunori Ikegami <ikegami.t@gmail.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: linux-mtd@lists.infradead.org,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>
Subject: Re: [PATCH v5 3/3] mtd: cfi_cmdset_0002: Add S29GL064N ID definition
Date: Wed, 23 Mar 2022 08:41:20 +0900 [thread overview]
Message-ID: <b3632c33-1132-2787-1d16-fbb21c0abace@gmail.com> (raw)
In-Reply-To: <20220322193427.1b9ad36a@xps13>
Hi Miquel-san,
On 2022/03/23 3:34, Miquel Raynal wrote:
> Hi Tokunori,
>
> ikegami.t@gmail.com wrote on Tue, 22 Mar 2022 11:10:01 +0900:
>
>> It is for the model number 01, 02, V1 and V2.
>>
>> Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
>> Cc: Miquel Raynal <miquel.raynal@bootlin.com>
>> Cc: Richard Weinberger <richard@nod.at>
>> Cc: Vignesh Raghavendra <vigneshr@ti.com>
>> Cc: linux-mtd@lists.infradead.org
>> ---
>> drivers/mtd/chips/cfi_cmdset_0002.c | 19 ++++++++++---------
>> 1 file changed, 10 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
>> index 59334530dd46..67453f59c69c 100644
>> --- a/drivers/mtd/chips/cfi_cmdset_0002.c
>> +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
>> @@ -48,6 +48,7 @@
>> #define SST49LF040B 0x0050
>> #define SST49LF008A 0x005a
>> #define AT49BV6416 0x00d6
>> +#define S29GL064N_MN12 0x0c01
>>
>> /*
>> * Status Register bit description. Used by flash devices that don't
>> @@ -445,7 +446,7 @@ static void fixup_quirks(struct mtd_info *mtd)
>> struct map_info *map = mtd->priv;
>> struct cfi_private *cfi = map->fldrv_priv;
>>
>> - if (cfi->mfr == CFI_MFR_AMD && cfi->id == 0x0c01)
>> + if (cfi->mfr == CFI_MFR_AMD && cfi->id == S29GL064N_MN12)
>> cfi->quirks |= CFI_QUIRK_DQ_TRUE_DATA;
>> }
>>
>> @@ -475,7 +476,7 @@ static struct cfi_fixup cfi_fixup_table[] = {
>> { CFI_MFR_AMD, 0x0056, fixup_use_secsi },
>> { CFI_MFR_AMD, 0x005C, fixup_use_secsi },
>> { CFI_MFR_AMD, 0x005F, fixup_use_secsi },
>> - { CFI_MFR_AMD, 0x0c01, fixup_s29gl064n_sectors },
>> + { CFI_MFR_AMD, S29GL064N_MN12, fixup_s29gl064n_sectors },
>> { CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors },
>> { CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors },
>> { CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors },
>> @@ -833,7 +834,7 @@ static int __xipram chip_ready(struct map_info *map, struct flchip *chip,
>> unsigned long addr, map_word *expected)
>> {
>> struct cfi_private *cfi = map->fldrv_priv;
>> - map_word d, t;
>> + map_word oldd, curd;
>> int ret;
>>
>> if (cfi_use_status_reg(cfi)) {
>> @@ -844,20 +845,20 @@ static int __xipram chip_ready(struct map_info *map, struct flchip *chip,
>> */
>> cfi_send_gen_cmd(0x70, cfi->addr_unlock1, chip->start, map, cfi,
>> cfi->device_type, NULL);
>> - t = map_read(map, addr);
>> + curd = map_read(map, addr);
>>
>> - return map_word_andequal(map, t, ready, ready);
>> + return map_word_andequal(map, curd, ready, ready);
>> }
>>
>> - d = map_read(map, addr);
>> - t = map_read(map, addr);
>> + oldd = map_read(map, addr);
>> + curd = map_read(map, addr);
>>
>> - ret = map_word_equal(map, d, t);
>> + ret = map_word_equal(map, oldd, curd);
>>
>> if (!ret || !expected)
>> return ret;
>>
>> - return map_word_equal(map, t, *expected);
>> + return map_word_equal(map, curd, *expected);
> Looks like there is a rebase issue.
The changes added are for the patch v4 1/3 comment below. Sorry I missed
to update the commit message so will update it as so.
> A lot of the diff is just a rename. I am not against a rename if you
> feel it's better, but in this order:
> 1: prepare the fix
> 2: fix
> 3: rename/define id's, whatever
Regards,
Ikegami
>
>> }
>>
>> static int __xipram chip_good(struct map_info *map, struct flchip *chip,
>
> Thanks,
> Miquèl
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
prev parent reply other threads:[~2022-03-22 23:41 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-22 2:09 [PATCH v5 0/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N Tokunori Ikegami
2022-03-22 2:09 ` Tokunori Ikegami
2022-03-22 2:09 ` [PATCH v5 1/3] mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write Tokunori Ikegami
2022-03-22 2:09 ` Tokunori Ikegami
2022-03-22 2:10 ` [PATCH v5 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N Tokunori Ikegami
2022-03-22 2:10 ` Tokunori Ikegami
2022-03-22 2:10 ` [PATCH v5 3/3] mtd: cfi_cmdset_0002: Add S29GL064N ID definition Tokunori Ikegami
2022-03-22 18:34 ` Miquel Raynal
2022-03-22 23:41 ` Tokunori Ikegami [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b3632c33-1132-2787-1d16-fbb21c0abace@gmail.com \
--to=ikegami.t@gmail.com \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.