Re: [PATCH] serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

On Wed, 9 Nov 2022, delisun wrote:

> Clearing the RX FIFO will cause data loss.
> Copy the pl011_enabl_interrupts implementation, and remove the clear
> interrupt and FIFO part of the code.
> 

You should add Fixes tag.

-- 
 i.


> Signed-off-by: delisun <delisun@pateo.com.cn>
> ---
>  drivers/tty/serial/amba-pl011.c | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
> index 5cdced39eafd..08034e5dcec0 100644
> --- a/drivers/tty/serial/amba-pl011.c
> +++ b/drivers/tty/serial/amba-pl011.c
> @@ -1828,8 +1828,17 @@ static void pl011_enable_interrupts(struct uart_amba_port *uap)
>  static void pl011_unthrottle_rx(struct uart_port *port)
>  {
>  	struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port);
> +	unsigned long flags;
>  
> -	pl011_enable_interrupts(uap);
> +	spin_lock_irqsave(&uap->port.lock, flags);
> +
> +	uap->im = UART011_RTIM;
> +	if (!pl011_dma_rx_running(uap))
> +		uap->im |= UART011_RXIM;
> +
> +	pl011_write(uap->im, uap, REG_IMSC);
> +
> +	spin_unlock_irqrestore(&uap->port.lock, flags);