All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jarred White <jarredwhite@linux.microsoft.com>
To: Andi Shyti <andi.shyti@kernel.org>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	"Rafael J . Wysocki" <rafael@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Len Brown <lenb@kernel.org>,
	"linux-i2c@vger.kernel.org" <linux-i2c@vger.kernel.org>,
	"linux-acpi@vger.kernel.org" <linux-acpi@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Allen Pais <apais@microsoft.com>,
	"rlmenge@gmail.com" <rlmenge@gmail.com>,
	"hargar@linux.microsoft.com" <hargar@linux.microsoft.com>,
	Siddharth Chintamaneni <sidchintamaneni@gmail.com>,
	Jeff Kirsher <jeff.kirsher@microsoft.com>
Subject: Re: [EXTERNAL] [PATCH v1 1/1] i2c: designware: Add ACPI ID MSFT0006 for Microsoft Cobalt SoCs
Date: Thu, 5 Nov 2026 13:27:06 -0800	[thread overview]
Message-ID: <b660d79f-887e-4594-ba76-c45dc5f75435@linux.microsoft.com> (raw)
In-Reply-To: <DS1PR21MB4279C556CFB876C5562C7F1182772@DS1PR21MB4279.namprd21.prod.outlook.com>

> [You don't often get email from sidchintamaneni@gmail.com. Learn why 
> this is important at https://aka.ms/LearnAboutSenderIdentification 
> <https://aka.ms/LearnAboutSenderIdentification> ]
> 
> Add the MSFT0006 ACPI ID for the DesignWare I2C controller integrated
> on Microsoft Cobalt SoCs, along with its 300 MHz input clock description
> in acpi_apd.c.
> 
> Without an explicit MSFT0006 entry, ACPI device matching falls back to
> its _CID (APMC0D0F), which configures a 100 MHz input clock instead of
> the controller's actual 300 MHz clock.
> 
> Signed-off-by: Siddharth Chintamaneni <sidchintamaneni@gmail.com>

Acked-by: Jarred White <jarredwhite@linux.microsoft.com>

> ---
 > Cc: Jarred White <jarredwhite@linux.microsoft.com>
 > Cc: Jeff Kirsher <jeff.kirsher@microsoft.com>
 >
>   drivers/acpi/acpi_apd.c                     | 6 ++++++
>   drivers/i2c/busses/i2c-designware-platdrv.c | 1 +
>   2 files changed, 7 insertions(+)
> 
> diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
> index 9fc667d6776c8..a1baa056931c4 100644
> --- a/drivers/acpi/acpi_apd.c
> +++ b/drivers/acpi/acpi_apd.c
> @@ -198,6 +198,11 @@ static const struct apd_device_desc hjmc_i2c_desc = {
>          .fixed_clk_rate = 200 * HZ_PER_MHZ,
>   };
> 
> +static const struct apd_device_desc msft_i2c_desc = {
> +       .setup = acpi_apd_setup,
> +       .fixed_clk_rate = 300 * HZ_PER_MHZ,
> +};
> +
>   #endif /* CONFIG_ARM64 */
> 
>   #endif
> @@ -272,6 +277,7 @@ static const struct acpi_device_id 
> acpi_apd_device_ids[] = {
>          { "HJMC3001", APD_ADDR(hjmc_i2c_desc) },
>          { "LECA0002", APD_ADDR(leca_spi_desc) },
>          { "LECA0003", APD_ADDR(leca_i2c_desc) },
> +       { "MSFT0006", APD_ADDR(msft_i2c_desc) },
>          { "NXP0001", APD_ADDR(nxp_i2c_desc) },
>   #endif
>          { }
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/ 
> busses/i2c-designware-platdrv.c
> index 1da6b0314b6a0..f359d38cc63c7 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -280,6 +280,7 @@ static const struct acpi_device_id 
> dw_i2c_acpi_match[] = {
>          { .id = "INT3433" },
>          { .id = "INTC10EF" },
>          { .id = "LECA0003" },
> +       { .id = "MSFT0006" },
>          { }
>   };
>   MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
> --
> 2.45.4
> 


  parent reply	other threads:[~2026-11-05 21:27 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-04 23:49 [PATCH v1 1/1] i2c: designware: Add ACPI ID MSFT0006 for Microsoft Cobalt SoCs Siddharth Chintamaneni
2026-11-05 10:03 ` Andy Shevchenko
2026-11-05 18:03 ` [EXTERNAL] " Jeff Kirsher
     [not found] ` <DS1PR21MB4279C556CFB876C5562C7F1182772@DS1PR21MB4279.namprd21.prod.outlook.com>
2026-11-05 21:27   ` Jarred White [this message]
2026-11-06 16:30     ` Siddharth Chintamaneni
2026-11-07  0:44       ` Siddharth Chintamaneni
2026-11-08 10:45         ` Wolfram Sang
2026-11-09 12:34           ` Andy Shevchenko
2026-11-09 20:53             ` Siddharth Chintamaneni
2026-11-08 10:41       ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b660d79f-887e-4594-ba76-c45dc5f75435@linux.microsoft.com \
    --to=jarredwhite@linux.microsoft.com \
    --cc=andi.shyti@kernel.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=apais@microsoft.com \
    --cc=hargar@linux.microsoft.com \
    --cc=jeff.kirsher@microsoft.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=rafael@kernel.org \
    --cc=rlmenge@gmail.com \
    --cc=sidchintamaneni@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.