Re: [PATCH v2 2/3] dt-bindings: net: bluetooth: Convert to DT schema

[gubbaven@codeaurora.org]

Hi Rob Herring,

On 2021-04-21 22:40, Rob Herring wrote:
> On Tue, Apr 20, 2021 at 09:56:49PM +0530, Venkata Lakshmi Narayana 
> Gubba wrote:
>> Converted Qualcomm Bluetooth binidings to DT schema.
>> 
>> Signed-off-by: Venkata Lakshmi Narayana Gubba 
>> <gubbaven@codeaurora.org>
>> ---
>>  .../devicetree/bindings/net/qualcomm-bluetooth.txt | 69 
>> -----------------
>>  .../bindings/net/qualcomm-bluetooth.yaml           | 87 
>> ++++++++++++++++++++++
>>  2 files changed, 87 insertions(+), 69 deletions(-)
>>  delete mode 100644 
>> Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
>>  create mode 100644 
>> Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
> 
>> diff --git 
>> a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml 
>> b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
>> new file mode 100644
>> index 0000000..55cd995
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
>> @@ -0,0 +1,87 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm Bluetooth Chips
>> +
>> +maintainers:
>> +  - Rob Herring <robh@kernel.org>
>> +  - Marcel Holtmann <marcel@holtmann.org>
> 
> This should be someone that knows and cares about this h/w. I don't.
> 
[Venkata]:
I will remove your name in next patchset.
>> +
>> +description:
>> +  This binding describes Qualcomm UART-attached bluetooth chips.
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - qcom,qca6174-bt
>> +      - qcom,qca9377-bt
>> +      - qcom,wcn3990-bt
>> +      - qcom,wcn3991-bt
>> +      - qcom,wcn3998-bt
>> +      - qcom,qca6390-bt
>> +
>> +  enable-gpios:
>> +    maxItems: 1
>> +    description: gpio specifier used to enable chip
>> +
>> +  clocks:
>> +    maxItems: 1
>> +    description: clock provided to the controller (SUSCLK_32KHZ)
>> +
>> +  vddio-supply:
>> +    description: VDD_IO supply regulator handle
>> +
>> +  vddxo-supply:
>> +    description: VDD_XO supply regulator handle
>> +
>> +  vddrf-supply:
>> +    description: VDD_RF supply regulator handle
>> +
>> +  vddch0-supply:
>> +    description: VDD_CH0 supply regulator handle
>> +
>> +  max-speed:
>> +    description: see 
>> Documentation/devicetree/bindings/serial/serial.yaml
>> +
>> +  firmware-name:
>> +    description: specify the name of nvm firmware to load
>> +
>> +  local-bd-address:
>> +    description: see 
>> Documentation/devicetree/bindings/net/bluetooth.txt
>> +
>> +
>> +required:
>> +  - compatible
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/gpio/gpio.h>
>> +    uart {
>> +        label = "BT-UART";
> 
> Why do you need a label for in internal port where you've described the
> connection?
> 
[Venkata]:
I will remove in next patchset.
>> +        status = "okay";
> 
> Don't show status in examples.
> 
[Venkata]:
Sure, I will remove in next patchset.
>> +
>> +        bluetooth {
>> +            compatible = "qcom,qca6174-bt";
>> +            enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
>> +            clocks = <&divclk4>;
>> +            firmware-name = "nvm_00440302.bin";
>> +        };
>> +    };
>> +  - |
>> +    uart {
>> +
>> +        bluetooth {
>> +            compatible = "qcom,wcn3990-bt";
>> +            vddio-supply = <&vreg_s4a_1p8>;
>> +            vddxo-supply = <&vreg_l7a_1p8>;
>> +            vddrf-supply = <&vreg_l17a_1p3>;
>> +            vddch0-supply = <&vreg_l25a_3p3>;
>> +            max-speed = <3200000>;
>> +            firmware-name = "crnv21.bin";
>> +        };
>> +    };
>> --
>> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
>> member
>> of Code Aurora Forum, hosted by The Linux Foundation
>> 

Regards,
Venkata.