From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001590]: Not able to record with c46xx on IBM T20
Date: Tue, 22 Nov 2005 21:02:16 +0100 [thread overview]
Message-ID: <b6ed84ea9a119ced3927d5afe0715957@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1590>
======================================================================
Reported By: mayouan
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1590
Category: PCI - cs46xx
Reproducibility: N/A
Severity: minor
Priority: normal
Status: new
Distribution: Debian
Kernel Version: 2.6.14-3
======================================================================
Date Submitted: 11-22-2005 20:35 CET
Last Modified: 11-22-2005 21:02 CET
======================================================================
Summary: Not able to record with c46xx on IBM T20
Description:
Hi.
I am not able to record with my T20 and alsa cs46xx
driver. Playback works fine, the alsa mixer works as
expected and i can hear the sound from the mic in the
speakers.
But when i try to record does the recording program
outputs an empty file (exept for a tiny wave-header).
Most programs does not give any error message.
Ecasound gives me a message when stoping the recording:
Warning: DBC_ENSURE failed - "is_running() == false",
eca-control-base.cpp, 276.-
Accordinng to Kai Vehmanen does this mean that alsa
does not release the lock on the soundcard when user is
aborting. That is likely the case.
Trying to record with Ardour leavs the computer not
responding at all.
I can not find anything in my error-logs telling that
alsa have loaded correctly nor does alsaconf give me
any error messages.
======================================================================
----------------------------------------------------------------------
mayouan - 11-22-05 21:02
----------------------------------------------------------------------
lsmod:
Module Size Used by
snd_cs46xx 88584 0
gameport 14984 2 snd_cs46xx
snd_rawmidi 24832 1 snd_cs46xx
snd_seq_device 8684 1 snd_rawmidi
snd_ac97_codec 98556 1 snd_cs46xx
snd_ac97_bus 2080 1 snd_ac97_codec
snd_pcm_oss 55040 0
snd_mixer_oss 19744 1 snd_pcm_oss
snd_pcm 92200 3 snd_cs46xx,snd_ac97_codec,snd_pcm_oss
snd_timer 24644 1 snd_pcm
snd 55620 8
snd_cs46xx,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
snd_page_alloc 10888 2 snd_cs46xx,snd_pcm
soundcore 9696 1 snd
ipv6 266400 17
apm 20748 1
af_packet 22504 2
pcmcia 40604 4
firmware_class 10464 1 pcmcia
nls_iso8859_1 3904 1
nls_cp437 5568 1
vfat 13856 1
fat 54140 1 vfat
md_mod 67024 0
8139cp 21824 0
8139too 27968 0
i2c_piix4 8752 0
mii 5504 2 8139cp,8139too
i2c_core 22096 1 i2c_piix4
pci_hotplug 28468 0
uhci_hcd 33296 0
usbcore 124544 2 uhci_hcd
intel_agp 24124 1
agpgart 35592 1 intel_agp
floppy 62564 0
yenta_socket 28268 5
rsrc_nonstatic 14144 1 yenta_socket
pcmcia_core 42960 3 pcmcia,yenta_socket,rsrc_nonstatic
irtty_sir 8640 0
sir_dev 18796 1 irtty_sir
irda 199996 2 irtty_sir,sir_dev
crc_ccitt 1920 1 irda
parport_pc 36804 0
parport 37064 1 parport_pc
pcspkr 3360 0
joydev 9856 0
ide_cd 43556 0
cdrom 40896 1 ide_cd
unix 27856 444
ext2 71272 2
mbcache 9252 1 ext2
ide_disk 18720 5
ide_generic 1152 0 [permanent]
generic 4292 0 [permanent]
piix 10404 0 [permanent]
ide_core 131452 5 ide_cd,ide_disk,ide_generic,generic,piix
evdev 9536 0
mousedev 11520 2
psmouse 39492 0
fbcon 41696 0
tileblit 2240 1 fbcon
font 7968 1 fbcon
bitblit 5728 1 fbcon
lspci:
0000:00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX
Host bridge (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
0000:00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP
bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f0000000-f7ffffff
Prefetchable memory behind bridge: 18000000-180fffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
0000:00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
Subsystem: IBM Thinkpad T20
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 10000000-11fff000 (prefetchable)
Memory window 1: 12000000-13fff000
I/O window 0: 00001400-000014ff
I/O window 1: 00002000-000020ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
0000:00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
Subsystem: IBM Thinkpad T20
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 14000000-15fff000 (prefetchable)
Memory window 1: 16000000-17fff000
I/O window 0: 00002400-000024ff
I/O window 1: 00002800-000028ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
0000:00:03.0 Communication controller: Agere Systems WinModem 56k (rev
01)
Subsystem: AMBIT Microsystem Corp. Lucent Win Modem
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8101000 (32-bit, non-prefetchable) [size=256]
Region 1: I/O ports at 1c00 [size=8]
Region 2: I/O ports at 1800 [size=256]
Capabilities: <available only to root>
0000:00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24
[CrystalClear SoundFusion Audio Accelerator] (rev 01)
Subsystem: IBM: Unknown device 0153
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 6000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8100000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <available only to root>
0000:00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
0000:00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev
01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at 1c10 [size=16]
0000:00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB
(rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 1c20 [size=32]
0000:00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
0000:01:00.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV
(rev 11) (prog-if 00 [VGA])
Subsystem: IBM ThinkPad T20
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=128M]
Expansion ROM at 18000000 [disabled] [size=64K]
Capabilities: <available only to root>
0000:02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1400 [size=256]
Region 1: Memory at 12000000 (32-bit, non-prefetchable) [size=512]
Capabilities: <available only to root>
johan@huozi:~$ cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.10rc1 (Mon Sep 12
08:13:09 2005 UTC).
johan@huozi:~$ cat /proc/asound/cards
0 [CS46xx ]: CS46xx - Sound Fusion CS46xx
Sound Fusion CS46xx at 0xe8100000/0xe8000000, irq 11
johan@huozi:~$ cat /proc/asound/card0/codec97#0/ac97#0-0
0-0/0: Cirrus Logic CS4297A rev 4
Capabilities : -headphone out-
DAC resolution : 20-bit
ADC resolution : 18-bit
3D enhancement : Crystal Semi 3D Stereo Enhancement
Current setup
Mic gain : +20dB [+20dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : on
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
Extended ID : codec=0 rev=0 AMAP DSA=0
Extended status :
SPDIF Control : Consumer PCM Category=0x2 Generation=1 Rate=48kHz
Enabled
Issue History
Date Modified Username Field Change
======================================================================
11-22-05 20:35 mayouan New Issue
11-22-05 20:35 mayouan Distribution => Debian
11-22-05 20:35 mayouan Kernel Version => 2.6.14-3
11-22-05 21:02 mayouan Note Added: 0006797
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc. Get Certified Today
Register for a JBoss Training Course. Free Certification Exam
for All Training Attendees Through End of 2005. For more info visit:
http://ads.osdn.com/?ad_id=7628&alloc_id=16845&op=click
next reply other threads:[~2005-11-22 20:02 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-22 20:02 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-11-23 16:22 [ALSA - driver 0001590]: Not able to record with c46xx on IBM T20 bugtrack
2005-11-22 22:18 bugtrack
2005-11-22 21:47 bugtrack
2005-11-22 20:22 bugtrack
2005-11-22 20:14 bugtrack
2005-11-22 19:35 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b6ed84ea9a119ced3927d5afe0715957@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.