From: Jeremy Fitzhardinge <jeremy@goop.org>
To: Ingo Molnar <mingo@elte.hu>
Cc: LKML <linux-kernel@vger.kernel.org>,
x86@kernel.org, Stephen Tweedie <sct@redhat.com>,
Eduardo Habkost <ehabkost@redhat.com>,
Mark McLoughlin <markmc@redhat.com>,
x86@kernel.org
Subject: [PATCH 12 of 55] xen64: define asm/xen/interface for 64-bit
Date: Tue, 08 Jul 2008 15:06:34 -0700 [thread overview]
Message-ID: <b7292ebdbc785cc0542b.1215554794@localhost> (raw)
In-Reply-To: <patchbomb.1215554782@localhost>
Copy 64-bit definitions of various interface structures into place.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
arch/x86/xen/mmu.h | 12 --
include/asm-x86/xen/interface.h | 139 +++++++++++--------------------
include/asm-x86/xen/interface_32.h | 97 +++++++++++++++++++++
include/asm-x86/xen/interface_64.h | 159 ++++++++++++++++++++++++++++++++++++
include/xen/interface/callback.h | 6 -
5 files changed, 308 insertions(+), 105 deletions(-)
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -9,18 +9,6 @@
PT_PMD,
PT_PTE
};
-
-/*
- * Page-directory addresses above 4GB do not fit into architectural %cr3.
- * When accessing %cr3, or equivalent field in vcpu_guest_context, guests
- * must use the following accessor macros to pack/unpack valid MFNs.
- *
- * Note that Xen is using the fact that the pagetable base is always
- * page-aligned, and putting the 12 MSB of the address into the 12 LSB
- * of cr3.
- */
-#define xen_pfn_to_cr3(pfn) (((unsigned)(pfn) << 12) | ((unsigned)(pfn) >> 20))
-#define xen_cr3_to_pfn(cr3) (((unsigned)(cr3) >> 12) | ((unsigned)(cr3) << 20))
void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
diff --git a/include/asm-x86/xen/interface.h b/include/asm-x86/xen/interface.h
--- a/include/asm-x86/xen/interface.h
+++ b/include/asm-x86/xen/interface.h
@@ -1,13 +1,13 @@
/******************************************************************************
* arch-x86_32.h
*
- * Guest OS interface to x86 32-bit Xen.
+ * Guest OS interface to x86 Xen.
*
* Copyright (c) 2004, K A Fraser
*/
-#ifndef __XEN_PUBLIC_ARCH_X86_32_H__
-#define __XEN_PUBLIC_ARCH_X86_32_H__
+#ifndef __ASM_X86_XEN_INTERFACE_H
+#define __ASM_X86_XEN_INTERFACE_H
#ifdef __XEN__
#define __DEFINE_GUEST_HANDLE(name, type) \
@@ -57,6 +57,17 @@
DEFINE_GUEST_HANDLE(void);
#endif
+#ifndef HYPERVISOR_VIRT_START
+#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
+#endif
+
+#ifndef machine_to_phys_mapping
+#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
+#endif
+
+/* Maximum number of virtual CPUs in multi-processor guests. */
+#define MAX_VIRT_CPUS 32
+
/*
* SEGMENT DESCRIPTOR TABLES
*/
@@ -71,58 +82,21 @@
#define FIRST_RESERVED_GDT_ENTRY (FIRST_RESERVED_GDT_BYTE / 8)
/*
- * These flat segments are in the Xen-private section of every GDT. Since these
- * are also present in the initial GDT, many OSes will be able to avoid
- * installing their own GDT.
- */
-#define FLAT_RING1_CS 0xe019 /* GDT index 259 */
-#define FLAT_RING1_DS 0xe021 /* GDT index 260 */
-#define FLAT_RING1_SS 0xe021 /* GDT index 260 */
-#define FLAT_RING3_CS 0xe02b /* GDT index 261 */
-#define FLAT_RING3_DS 0xe033 /* GDT index 262 */
-#define FLAT_RING3_SS 0xe033 /* GDT index 262 */
-
-#define FLAT_KERNEL_CS FLAT_RING1_CS
-#define FLAT_KERNEL_DS FLAT_RING1_DS
-#define FLAT_KERNEL_SS FLAT_RING1_SS
-#define FLAT_USER_CS FLAT_RING3_CS
-#define FLAT_USER_DS FLAT_RING3_DS
-#define FLAT_USER_SS FLAT_RING3_SS
-
-/* And the trap vector is... */
-#define TRAP_INSTR "int $0x82"
-
-/*
- * Virtual addresses beyond this are not modifiable by guest OSes. The
- * machine->physical mapping table starts at this address, read-only.
- */
-#ifdef CONFIG_X86_PAE
-#define __HYPERVISOR_VIRT_START 0xF5800000
-#else
-#define __HYPERVISOR_VIRT_START 0xFC000000
-#endif
-
-#ifndef HYPERVISOR_VIRT_START
-#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
-#endif
-
-#ifndef machine_to_phys_mapping
-#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
-#endif
-
-/* Maximum number of virtual CPUs in multi-processor guests. */
-#define MAX_VIRT_CPUS 32
-
-#ifndef __ASSEMBLY__
-
-/*
* Send an array of these to HYPERVISOR_set_trap_table()
+ * The privilege level specifies which modes may enter a trap via a software
+ * interrupt. On x86/64, since rings 1 and 2 are unavailable, we allocate
+ * privilege levels as follows:
+ * Level == 0: Noone may enter
+ * Level == 1: Kernel may enter
+ * Level == 2: Kernel may enter
+ * Level == 3: Everyone may enter
*/
#define TI_GET_DPL(_ti) ((_ti)->flags & 3)
#define TI_GET_IF(_ti) ((_ti)->flags & 4)
#define TI_SET_DPL(_ti, _dpl) ((_ti)->flags |= (_dpl))
#define TI_SET_IF(_ti, _if) ((_ti)->flags |= ((!!(_if))<<2))
+#ifndef __ASSEMBLY__
struct trap_info {
uint8_t vector; /* exception vector */
uint8_t flags; /* 0-3: privilege level; 4: clear event enable? */
@@ -131,32 +105,21 @@
};
DEFINE_GUEST_HANDLE_STRUCT(trap_info);
-struct cpu_user_regs {
- uint32_t ebx;
- uint32_t ecx;
- uint32_t edx;
- uint32_t esi;
- uint32_t edi;
- uint32_t ebp;
- uint32_t eax;
- uint16_t error_code; /* private */
- uint16_t entry_vector; /* private */
- uint32_t eip;
- uint16_t cs;
- uint8_t saved_upcall_mask;
- uint8_t _pad0;
- uint32_t eflags; /* eflags.IF == !saved_upcall_mask */
- uint32_t esp;
- uint16_t ss, _pad1;
- uint16_t es, _pad2;
- uint16_t ds, _pad3;
- uint16_t fs, _pad4;
- uint16_t gs, _pad5;
+struct arch_shared_info {
+ unsigned long max_pfn; /* max pfn that appears in table */
+ /* Frame containing list of mfns containing list of mfns containing p2m. */
+ unsigned long pfn_to_mfn_frame_list_list;
+ unsigned long nmi_reason;
};
-DEFINE_GUEST_HANDLE_STRUCT(cpu_user_regs);
+#endif /* !__ASSEMBLY__ */
-typedef uint64_t tsc_timestamp_t; /* RDTSC timestamp */
+#ifdef CONFIG_X86_32
+#include "interface_32.h"
+#else
+#include "interface_64.h"
+#endif
+#ifndef __ASSEMBLY__
/*
* The following is all CPU context. Note that the fpu_ctxt block is filled
* in by FXSAVE if the CPU has feature FXSR; otherwise FSAVE is used.
@@ -173,33 +136,29 @@
unsigned long ldt_base, ldt_ents; /* LDT (linear address, # ents) */
unsigned long gdt_frames[16], gdt_ents; /* GDT (machine frames, # ents) */
unsigned long kernel_ss, kernel_sp; /* Virtual TSS (only SS1/SP1) */
+ /* NB. User pagetable on x86/64 is placed in ctrlreg[1]. */
unsigned long ctrlreg[8]; /* CR0-CR7 (control registers) */
unsigned long debugreg[8]; /* DB0-DB7 (debug registers) */
+#ifdef __i386__
unsigned long event_callback_cs; /* CS:EIP of event callback */
unsigned long event_callback_eip;
unsigned long failsafe_callback_cs; /* CS:EIP of failsafe callback */
unsigned long failsafe_callback_eip;
+#else
+ unsigned long event_callback_eip;
+ unsigned long failsafe_callback_eip;
+ unsigned long syscall_callback_eip;
+#endif
unsigned long vm_assist; /* VMASST_TYPE_* bitmap */
+#ifdef __x86_64__
+ /* Segment base addresses. */
+ uint64_t fs_base;
+ uint64_t gs_base_kernel;
+ uint64_t gs_base_user;
+#endif
};
DEFINE_GUEST_HANDLE_STRUCT(vcpu_guest_context);
-
-struct arch_shared_info {
- unsigned long max_pfn; /* max pfn that appears in table */
- /* Frame containing list of mfns containing list of mfns containing p2m. */
- unsigned long pfn_to_mfn_frame_list_list;
- unsigned long nmi_reason;
-};
-
-struct arch_vcpu_info {
- unsigned long cr2;
- unsigned long pad[5]; /* sizeof(struct vcpu_info) == 64 */
-};
-
-struct xen_callback {
- unsigned long cs;
- unsigned long eip;
-};
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLY__ */
/*
* Prefix forces emulation of some non-trapping instructions.
@@ -213,4 +172,4 @@
#define XEN_CPUID XEN_EMULATE_PREFIX "cpuid"
#endif
-#endif
+#endif /* __ASM_X86_XEN_INTERFACE_H */
diff --git a/include/asm-x86/xen/interface_32.h b/include/asm-x86/xen/interface_32.h
new file mode 100644
--- /dev/null
+++ b/include/asm-x86/xen/interface_32.h
@@ -0,0 +1,97 @@
+/******************************************************************************
+ * arch-x86_32.h
+ *
+ * Guest OS interface to x86 32-bit Xen.
+ *
+ * Copyright (c) 2004, K A Fraser
+ */
+
+#ifndef __ASM_X86_XEN_INTERFACE_32_H
+#define __ASM_X86_XEN_INTERFACE_32_H
+
+
+/*
+ * These flat segments are in the Xen-private section of every GDT. Since these
+ * are also present in the initial GDT, many OSes will be able to avoid
+ * installing their own GDT.
+ */
+#define FLAT_RING1_CS 0xe019 /* GDT index 259 */
+#define FLAT_RING1_DS 0xe021 /* GDT index 260 */
+#define FLAT_RING1_SS 0xe021 /* GDT index 260 */
+#define FLAT_RING3_CS 0xe02b /* GDT index 261 */
+#define FLAT_RING3_DS 0xe033 /* GDT index 262 */
+#define FLAT_RING3_SS 0xe033 /* GDT index 262 */
+
+#define FLAT_KERNEL_CS FLAT_RING1_CS
+#define FLAT_KERNEL_DS FLAT_RING1_DS
+#define FLAT_KERNEL_SS FLAT_RING1_SS
+#define FLAT_USER_CS FLAT_RING3_CS
+#define FLAT_USER_DS FLAT_RING3_DS
+#define FLAT_USER_SS FLAT_RING3_SS
+
+/* And the trap vector is... */
+#define TRAP_INSTR "int $0x82"
+
+/*
+ * Virtual addresses beyond this are not modifiable by guest OSes. The
+ * machine->physical mapping table starts at this address, read-only.
+ */
+#define __HYPERVISOR_VIRT_START 0xF5800000
+
+#ifndef __ASSEMBLY__
+
+struct cpu_user_regs {
+ uint32_t ebx;
+ uint32_t ecx;
+ uint32_t edx;
+ uint32_t esi;
+ uint32_t edi;
+ uint32_t ebp;
+ uint32_t eax;
+ uint16_t error_code; /* private */
+ uint16_t entry_vector; /* private */
+ uint32_t eip;
+ uint16_t cs;
+ uint8_t saved_upcall_mask;
+ uint8_t _pad0;
+ uint32_t eflags; /* eflags.IF == !saved_upcall_mask */
+ uint32_t esp;
+ uint16_t ss, _pad1;
+ uint16_t es, _pad2;
+ uint16_t ds, _pad3;
+ uint16_t fs, _pad4;
+ uint16_t gs, _pad5;
+};
+DEFINE_GUEST_HANDLE_STRUCT(cpu_user_regs);
+
+typedef uint64_t tsc_timestamp_t; /* RDTSC timestamp */
+
+struct arch_vcpu_info {
+ unsigned long cr2;
+ unsigned long pad[5]; /* sizeof(struct vcpu_info) == 64 */
+};
+
+struct xen_callback {
+ unsigned long cs;
+ unsigned long eip;
+};
+typedef struct xen_callback xen_callback_t;
+
+#define XEN_CALLBACK(__cs, __eip) \
+ ((struct xen_callback){ .cs = (__cs), .eip = (unsigned long)(__eip) })
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * Page-directory addresses above 4GB do not fit into architectural %cr3.
+ * When accessing %cr3, or equivalent field in vcpu_guest_context, guests
+ * must use the following accessor macros to pack/unpack valid MFNs.
+ *
+ * Note that Xen is using the fact that the pagetable base is always
+ * page-aligned, and putting the 12 MSB of the address into the 12 LSB
+ * of cr3.
+ */
+#define xen_pfn_to_cr3(pfn) (((unsigned)(pfn) << 12) | ((unsigned)(pfn) >> 20))
+#define xen_cr3_to_pfn(cr3) (((unsigned)(cr3) >> 12) | ((unsigned)(cr3) << 20))
+
+#endif /* __ASM_X86_XEN_INTERFACE_32_H */
diff --git a/include/asm-x86/xen/interface_64.h b/include/asm-x86/xen/interface_64.h
new file mode 100644
--- /dev/null
+++ b/include/asm-x86/xen/interface_64.h
@@ -0,0 +1,159 @@
+#ifndef __ASM_X86_XEN_INTERFACE_64_H
+#define __ASM_X86_XEN_INTERFACE_64_H
+
+/*
+ * 64-bit segment selectors
+ * These flat segments are in the Xen-private section of every GDT. Since these
+ * are also present in the initial GDT, many OSes will be able to avoid
+ * installing their own GDT.
+ */
+
+#define FLAT_RING3_CS32 0xe023 /* GDT index 260 */
+#define FLAT_RING3_CS64 0xe033 /* GDT index 261 */
+#define FLAT_RING3_DS32 0xe02b /* GDT index 262 */
+#define FLAT_RING3_DS64 0x0000 /* NULL selector */
+#define FLAT_RING3_SS32 0xe02b /* GDT index 262 */
+#define FLAT_RING3_SS64 0xe02b /* GDT index 262 */
+
+#define FLAT_KERNEL_DS64 FLAT_RING3_DS64
+#define FLAT_KERNEL_DS32 FLAT_RING3_DS32
+#define FLAT_KERNEL_DS FLAT_KERNEL_DS64
+#define FLAT_KERNEL_CS64 FLAT_RING3_CS64
+#define FLAT_KERNEL_CS32 FLAT_RING3_CS32
+#define FLAT_KERNEL_CS FLAT_KERNEL_CS64
+#define FLAT_KERNEL_SS64 FLAT_RING3_SS64
+#define FLAT_KERNEL_SS32 FLAT_RING3_SS32
+#define FLAT_KERNEL_SS FLAT_KERNEL_SS64
+
+#define FLAT_USER_DS64 FLAT_RING3_DS64
+#define FLAT_USER_DS32 FLAT_RING3_DS32
+#define FLAT_USER_DS FLAT_USER_DS64
+#define FLAT_USER_CS64 FLAT_RING3_CS64
+#define FLAT_USER_CS32 FLAT_RING3_CS32
+#define FLAT_USER_CS FLAT_USER_CS64
+#define FLAT_USER_SS64 FLAT_RING3_SS64
+#define FLAT_USER_SS32 FLAT_RING3_SS32
+#define FLAT_USER_SS FLAT_USER_SS64
+
+#define __HYPERVISOR_VIRT_START 0xFFFF800000000000
+#define __HYPERVISOR_VIRT_END 0xFFFF880000000000
+#define __MACH2PHYS_VIRT_START 0xFFFF800000000000
+#define __MACH2PHYS_VIRT_END 0xFFFF804000000000
+
+#ifndef HYPERVISOR_VIRT_START
+#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
+#define HYPERVISOR_VIRT_END mk_unsigned_long(__HYPERVISOR_VIRT_END)
+#endif
+
+#define MACH2PHYS_VIRT_START mk_unsigned_long(__MACH2PHYS_VIRT_START)
+#define MACH2PHYS_VIRT_END mk_unsigned_long(__MACH2PHYS_VIRT_END)
+#define MACH2PHYS_NR_ENTRIES ((MACH2PHYS_VIRT_END-MACH2PHYS_VIRT_START)>>3)
+#ifndef machine_to_phys_mapping
+#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
+#endif
+
+/*
+ * int HYPERVISOR_set_segment_base(unsigned int which, unsigned long base)
+ * @which == SEGBASE_* ; @base == 64-bit base address
+ * Returns 0 on success.
+ */
+#define SEGBASE_FS 0
+#define SEGBASE_GS_USER 1
+#define SEGBASE_GS_KERNEL 2
+#define SEGBASE_GS_USER_SEL 3 /* Set user %gs specified in base[15:0] */
+
+/*
+ * int HYPERVISOR_iret(void)
+ * All arguments are on the kernel stack, in the following format.
+ * Never returns if successful. Current kernel context is lost.
+ * The saved CS is mapped as follows:
+ * RING0 -> RING3 kernel mode.
+ * RING1 -> RING3 kernel mode.
+ * RING2 -> RING3 kernel mode.
+ * RING3 -> RING3 user mode.
+ * However RING0 indicates that the guest kernel should return to iteself
+ * directly with
+ * orb $3,1*8(%rsp)
+ * iretq
+ * If flags contains VGCF_in_syscall:
+ * Restore RAX, RIP, RFLAGS, RSP.
+ * Discard R11, RCX, CS, SS.
+ * Otherwise:
+ * Restore RAX, R11, RCX, CS:RIP, RFLAGS, SS:RSP.
+ * All other registers are saved on hypercall entry and restored to user.
+ */
+/* Guest exited in SYSCALL context? Return to guest with SYSRET? */
+#define _VGCF_in_syscall 8
+#define VGCF_in_syscall (1<<_VGCF_in_syscall)
+#define VGCF_IN_SYSCALL VGCF_in_syscall
+
+#ifndef __ASSEMBLY__
+
+struct iret_context {
+ /* Top of stack (%rsp at point of hypercall). */
+ uint64_t rax, r11, rcx, flags, rip, cs, rflags, rsp, ss;
+ /* Bottom of iret stack frame. */
+};
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+/* Anonymous union includes both 32- and 64-bit names (e.g., eax/rax). */
+#define __DECL_REG(name) union { \
+ uint64_t r ## name, e ## name; \
+ uint32_t _e ## name; \
+}
+#else
+/* Non-gcc sources must always use the proper 64-bit name (e.g., rax). */
+#define __DECL_REG(name) uint64_t r ## name
+#endif
+
+struct cpu_user_regs {
+ uint64_t r15;
+ uint64_t r14;
+ uint64_t r13;
+ uint64_t r12;
+ __DECL_REG(bp);
+ __DECL_REG(bx);
+ uint64_t r11;
+ uint64_t r10;
+ uint64_t r9;
+ uint64_t r8;
+ __DECL_REG(ax);
+ __DECL_REG(cx);
+ __DECL_REG(dx);
+ __DECL_REG(si);
+ __DECL_REG(di);
+ uint32_t error_code; /* private */
+ uint32_t entry_vector; /* private */
+ __DECL_REG(ip);
+ uint16_t cs, _pad0[1];
+ uint8_t saved_upcall_mask;
+ uint8_t _pad1[3];
+ __DECL_REG(flags); /* rflags.IF == !saved_upcall_mask */
+ __DECL_REG(sp);
+ uint16_t ss, _pad2[3];
+ uint16_t es, _pad3[3];
+ uint16_t ds, _pad4[3];
+ uint16_t fs, _pad5[3]; /* Non-zero => takes precedence over fs_base. */
+ uint16_t gs, _pad6[3]; /* Non-zero => takes precedence over gs_base_usr. */
+};
+DEFINE_GUEST_HANDLE_STRUCT(cpu_user_regs);
+
+#undef __DECL_REG
+
+#define xen_pfn_to_cr3(pfn) ((unsigned long)(pfn) << 12)
+#define xen_cr3_to_pfn(cr3) ((unsigned long)(cr3) >> 12)
+
+struct arch_vcpu_info {
+ unsigned long cr2;
+ unsigned long pad; /* sizeof(vcpu_info_t) == 64 */
+};
+
+typedef unsigned long xen_callback_t;
+
+#define XEN_CALLBACK(__cs, __rip) \
+ ((unsigned long)(__rip))
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __ASM_X86_XEN_INTERFACE_64_H */
diff --git a/include/xen/interface/callback.h b/include/xen/interface/callback.h
--- a/include/xen/interface/callback.h
+++ b/include/xen/interface/callback.h
@@ -82,9 +82,9 @@
*/
#define CALLBACKOP_register 0
struct callback_register {
- uint16_t type;
- uint16_t flags;
- struct xen_callback address;
+ uint16_t type;
+ uint16_t flags;
+ xen_callback_t address;
};
/*
next prev parent reply other threads:[~2008-07-08 23:33 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-08 22:06 [PATCH 00 of 55] xen64: implement 64-bit Xen support Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 01 of 55] x86/paravirt: Call paravirt_pagetable_setup_{start, done} Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 02 of 55] pvops-64: call paravirt_post_allocator_init() on setup_arch() Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 03 of 55] x86_64: there's no need to preallocate level1_fixmap_pgt Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 04 of 55] x86: clean up formatting of __switch_to Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 05 of 55] x86: use __page_aligned_data/bss Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 06 of 55] x86_64: adjust exception frame in ia32entry Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 07 of 55] x86_64: unstatic get_local_pda Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 08 of 55] xen: print backtrace on multicall failure Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 09 of 55] xen-netfront: fix xennet_release_tx_bufs() Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 10 of 55] xen: add xen_arch_resume()/xen_timer_resume hook for ia64 support Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 11 of 55] xen: define set_pte from the outset Jeremy Fitzhardinge
2008-07-08 22:06 ` Jeremy Fitzhardinge [this message]
2008-07-08 22:06 ` [PATCH 13 of 55] xen: make ELF notes work for 32 and 64 bit Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 14 of 55] xen: fix 64-bit hypercall variants Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 15 of 55] xen64: fix calls into hypercall page Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 16 of 55] xen64: add extra pv_mmu_ops Jeremy Fitzhardinge
2008-07-09 7:55 ` Mark McLoughlin
2008-07-09 8:02 ` Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 17 of 55] xen64: random ifdefs to mask out 32-bit only code Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 18 of 55] xen64: get active_mm from the pda Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 19 of 55] xen: move smp setup into smp.c Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 20 of 55] x86_64: add workaround for no %gs-based percpu Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 21 of 55] xen64: smp.c compile hacking Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 22 of 55] xen64: add xen-head code to head_64.S Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 23 of 55] xen64: add asm-offsets Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 24 of 55] xen64: add 64-bit assembler Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 25 of 55] xen64: use set_fixmap for shared_info structure Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 26 of 55] xen: cpu_detect is 32-bit only Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 27 of 55] xen64: add hypervisor callbacks for events, etc Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 28 of 55] xen64: early mapping setup Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 29 of 55] xen64: 64-bit starts using set_pte from very early Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 30 of 55] xen64: map an initial chunk of physical memory Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 31 of 55] xen32: create initial mappings like 64-bit Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 32 of 55] xen: fix truncation of machine address Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 33 of 55] xen64: use arbitrary_virt_to_machine for xen_set_pmd Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 34 of 55] xen: set num_processors Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 35 of 55] xen64: defer setting pagetable alloc/release ops Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 36 of 55] xen: use set_pte_vaddr Jeremy Fitzhardinge
2008-07-08 22:06 ` [PATCH 37 of 55] xen64: xen_write_idt_entry() and cvt_gate_to_trap() Jeremy Fitzhardinge
2008-07-08 22:07 ` [PATCH 38 of 55] xen64: deal with extra words Xen pushes onto exception frames Jeremy Fitzhardinge
2008-07-08 22:07 ` [PATCH 39 of 55] xen64: add pvop for swapgs Jeremy Fitzhardinge
2008-07-08 22:07 ` [PATCH 40 of 55] xen64: register callbacks in arch-independent way Jeremy Fitzhardinge
2008-07-08 22:07 ` [PATCH 41 of 55] xen64: add identity irq->vector map Jeremy Fitzhardinge
2008-07-08 22:07 ` [PATCH 42 of 55] Xen64: HYPERVISOR_set_segment_base() implementation Jeremy Fitzhardinge
2008-07-08 22:07 ` [PATCH 43 of 55] xen64: implement xen_load_gs_index() Jeremy Fitzhardinge
2008-07-08 22:07 ` [PATCH 44 of 55] xen: rework pgd_walk to deal with 32/64 bit Jeremy Fitzhardinge
2008-07-08 22:07 ` [PATCH 45 of 55] xen: make sure the kernel command line is right Jeremy Fitzhardinge
2008-07-08 22:07 ` [PATCH 46 of 55] xen: enable PM_SLEEP for CONFIG_XEN Jeremy Fitzhardinge
2008-07-08 22:07 ` [PATCH 47 of 55] xen64: implement failsafe callback Jeremy Fitzhardinge
2008-07-08 22:07 ` [PATCH 48 of 55] xen64: Clear %fs on xen_load_tls() Jeremy Fitzhardinge
2008-07-08 22:07 ` [PATCH 49 of 55] xen64: implement 64-bit update_descriptor Jeremy Fitzhardinge
2008-07-08 22:07 ` [PATCH 50 of 55] xen64: save lots of registers Jeremy Fitzhardinge
2008-07-08 22:07 ` [PATCH 51 of 55] xen64: allocate and manage user pagetables Jeremy Fitzhardinge
2008-07-08 22:07 ` [PATCH 52 of 55] xen64: set up syscall and sysenter entrypoints for 64-bit Jeremy Fitzhardinge
2008-07-08 22:07 ` [PATCH 53 of 55] xen64: set up userspace syscall patch Jeremy Fitzhardinge
2008-07-08 22:07 ` [PATCH 54 of 55] xen: implement Xen write_msr operation Jeremy Fitzhardinge
2008-07-08 22:07 ` [PATCH 55 of 55] xen: update Kconfig to allow 64-bit Xen Jeremy Fitzhardinge
2008-07-09 11:12 ` [PATCH 00 of 55] xen64: implement 64-bit Xen support Ingo Molnar
2008-07-09 11:16 ` [patch] power, xen64: fix PM_SLEEP build dependencies (was: Re: [PATCH 00 of 55] xen64: implement 64-bit Xen support) Ingo Molnar
2008-07-09 19:47 ` Ingo Molnar
2008-07-09 19:52 ` Ingo Molnar
2008-07-09 19:59 ` Rafael J. Wysocki
2008-07-09 20:02 ` Rafael J. Wysocki
2008-07-09 20:04 ` Ingo Molnar
2008-07-09 20:17 ` [patch] power, xen64: fix PM_SLEEP build dependencies Jeremy Fitzhardinge
2008-07-09 20:17 ` [patch] power, xen64: fix PM_SLEEP build dependencies (was: Re: [PATCH 00 of 55] xen64: implement 64-bit Xen support) Rafael J. Wysocki
2008-07-09 20:23 ` [patch] power, xen64: fix PM_SLEEP build dependencies Jeremy Fitzhardinge
2008-07-09 20:26 ` Ingo Molnar
2008-07-09 20:33 ` Rafael J. Wysocki
2008-07-09 20:39 ` Jeremy Fitzhardinge
2008-07-09 20:42 ` Ingo Molnar
2008-07-09 20:53 ` Rafael J. Wysocki
2008-07-09 20:23 ` [patch] power, xen64: fix PM_SLEEP build dependencies (was: Re: [PATCH 00 of 55] xen64: implement 64-bit Xen support) Ingo Molnar
2008-07-09 20:40 ` [patch] power, xen64: fix PM_SLEEP build dependencies Jeremy Fitzhardinge
2008-07-09 11:21 ` [patch] xen64: fix !HVC_XEN build dependency (was: Re: [PATCH 00 of 55] xen64: implement 64-bit Xen support) Ingo Molnar
2008-07-09 16:07 ` [patch] xen64: fix !HVC_XEN build dependency Jeremy Fitzhardinge
2008-07-09 11:47 ` [patch] xen64: fix build error on 32-bit + !HIGHMEM (was: Re: [PATCH 00 of 55] xen64: implement 64-bit Xen support) Ingo Molnar
2008-07-09 16:07 ` [patch] xen64: fix build error on 32-bit + !HIGHMEM Jeremy Fitzhardinge
2008-07-09 16:12 ` [PATCH 00 of 55] xen64: implement 64-bit Xen support Jeremy Fitzhardinge
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b7292ebdbc785cc0542b.1215554794@localhost \
--to=jeremy@goop.org \
--cc=ehabkost@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=markmc@redhat.com \
--cc=mingo@elte.hu \
--cc=sct@redhat.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.