Re: [PATCH v9 9/9] leds: max77705: Add LEDs support

[Krzysztof Kozlowski <krzk@kernel.org>]

On 02/12/2024 10:48, Dzmitry Sankouski wrote:
> This adds basic support for LEDs for the max77705 PMIC.
> 
> Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
> 
> ---
> Changes for v8:
> - join line where possible to fit in 100 chars


Coding style asks for 80. checkpatch is not a coding style, unless this
came from maintainer's review.

> - change comment style C++ -> C
> 

> Changes for v6:
> - change compatible suffix to 'rgb'
> - remove I2C dependency in Kconfig
> - remove copyright and author from 'based on' header statement
> - replace MFD abbreviation with PMIC
> - MAINTAINERS: alphabetic order
> - max77705_rgb_blink: replace ternary operators with if..else if sequence
> - max77705_rgb_blink: move hardcoded numbers to constants
> - max77705_led_brightness_set: move ret to the bottom
> - s/map/regmap
> - replace device_for_each_child_node with scoped version
> - s/rv/ret
> Changes for v5:
> - use same hardware name in Kconfig and module descriptions
> - remove copyrighter owner from module authors
> 
> Changes in v4:
> - inline BLINK_(ON|OFF) macro
> - remove camel case
> - drop backwards compatibility(new driver)
> - drop module alias
> ---
>  MAINTAINERS                          |   1 +
>  drivers/leds/Kconfig                 |   6 ++++++
>  drivers/leds/Makefile                |   1 +
>  drivers/leds/leds-max77705.c         | 167 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/max77705-private.h |  18 ++++++++++++++++
>  5 files changed, 193 insertions(+)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS


...

> diff --git a/include/linux/mfd/max77705-private.h b/include/linux/mfd/max77705-private.h
> index be781a0f9802..2140693ce747 100644
> --- a/include/linux/mfd/max77705-private.h
> +++ b/include/linux/mfd/max77705-private.h
> @@ -35,6 +35,24 @@
>  #define MAX77705_SYSTEM_IRQ_SYSOVLO_INT	BIT(5)
>  #define MAX77705_SYSTEM_IRQ_TSHDN_INT	BIT(6)
>  #define MAX77705_SYSTEM_IRQ_TM_INT	BIT(7)
> +/* MAX77705_RGBLED_REG_LEDEN register */
> +#define MAX77705_RGBLED_EN_WIDTH	2
> +/* MAX77705_RGBLED_REG_LEDBLNK register */
> +#define MAX77705_RGB_DELAY_100_STEP_LIM 500
> +#define MAX77705_RGB_DELAY_100_STEP_COUNT 4
> +#define MAX77705_RGB_DELAY_100_STEP 100
> +#define MAX77705_RGB_DELAY_250_STEP_LIM 3250
> +#define MAX77705_RGB_DELAY_250_STEP 250
> +#define MAX77705_RGB_DELAY_500_STEP 500
> +#define MAX77705_RGB_DELAY_500_STEP_COUNT 10
> +#define MAX77705_RGB_DELAY_500_STEP_LIM 5000
> +#define MAX77705_RGB_DELAY_1000_STEP_LIM 8000
> +#define MAX77705_RGB_DELAY_1000_STEP_COUNT 13
> +#define MAX77705_RGB_DELAY_1000_STEP 1000
> +#define MAX77705_RGB_DELAY_2000_STEP 2000
> +#define MAX77705_RGB_DELAY_2000_STEP_COUNT 13
> +#define MAX77705_RGB_DELAY_2000_STEP_LIM 12000
> +
>  

No need for multiple line breaks.

Best regards,
Krzysztof