From: Anand Gadiyar <gadiyar@ti.com>
To: linux-omap <linux-omap@vger.kernel.org>
Subject: Linux-next as of 20110222 broken on OMAP4
Date: Tue, 22 Feb 2011 15:19:48 +0530 [thread overview]
Message-ID: <b858222d69a83460e469b80ee13cfbe8@mail.gmail.com> (raw)
Looks like linux-next as of today is broken on at least OMAP4.
Turning on earlyprintk, I get a crash in omap_init_mcspi. Disabling
CONFIG_SPI_OMAP24XX gets me as far as the following lines from my
bootup log, but I haven't attempted to debug further.
If there are any patches out there to fix this, let me know.
Else I will debug this sometime tomorrow.
- Anand
[ 0.622802] print_constraints: dummy:
[ 0.627655] NET: Registered protocol family 16
[ 0.632537] GPMC revision 6.0
[ 0.635681] Trying to install interrupt handler for IRQ402
[ 0.641418] Trying to install interrupt handler for IRQ403
[ 0.647125] Trying to install interrupt handler for IRQ404
[ 0.652862] Trying to install interrupt handler for IRQ405
[ 0.658599] Trying to install interrupt handler for IRQ406
[ 0.664306] Trying to install interrupt handler for IRQ407
[ 0.670043] Trying to install interrupt handler for IRQ408
[ 0.675781] Trying to install type control for IRQ409
[ 0.681060] Trying to set irq flags for IRQ409
[ 0.685699] gpmc: irq-20 could not claim: err -22
[ 0.695556] omap_device: omap_gpio.0: new worst case activate latency
0: 91552
[ 0.703552] OMAP GPIO hardware version 0.1
[ 0.708221] OMAP GPIO hardware version 0.1
[ 0.712890] OMAP GPIO hardware version 0.1
[ 0.717498] OMAP GPIO hardware version 0.1
[ 0.722137] OMAP GPIO hardware version 0.1
[ 0.726776] OMAP GPIO hardware version 0.1[ 0.738403] omap_mux_init:
Add partition: #1: core, flags: 2
[ 0.746276] omap_mux_init: Add partition: #2: wkup, flags: 2
[ 0.752349] error setting wl12xx data
[ 0.759674] omap_device: omap_uart.0: new worst case deactivate latency
0: 30517
[ 0.769805] Failed omap4_twl6030_hsmmc_set_late_init
[ 0.777587] hw-breakpoint: found 6 breakpoint and 1 watchpoint
registers.
[ 0.784667] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint
single-step.
[ 0.792266] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.803466] pm_dbg_init: only OMAP3 supported
[ 0.808441] OMAP DMA hardware revision 0.0
[ 0.849426] bio: create slab <bio-0> at 0
[ 0.856201] print_constraints: vwl1271: 1800 mV
[ 0.864959] SCSI subsystem initialized
[ 0.870605] usbcore: registered new interface driver usbfs
[ 0.876739] usbcore: registered new interface driver hub
[ 0.882751] usbcore: registered new device driver usb
[ 0.889221] omap_device: omap_i2c.1: new worst case activate latency 0:
30517
next reply other threads:[~2011-02-22 9:49 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-22 9:49 Anand Gadiyar [this message]
2011-02-22 10:24 ` Linux-next as of 20110222 broken on OMAP4 Govindraj
2011-02-22 10:28 ` Anand Gadiyar
2011-02-22 12:51 ` Cousson, Benoit
2011-02-22 13:13 ` Santosh Shilimkar
2011-02-22 19:13 ` Tony Lindgren
2011-02-23 4:50 ` DebBarma, Tarun Kanti
2011-02-23 12:07 ` Kishore Kadiyala
2011-02-23 12:20 ` DebBarma, Tarun Kanti
2011-02-23 12:52 ` Kishore Kadiyala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b858222d69a83460e469b80ee13cfbe8@mail.gmail.com \
--to=gadiyar@ti.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.