[PATCH] usb: misc: remove outdated USB LED driver

[Heiner Kallweit <hkallweit1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

The USB LED driver exposes a undocumented sysfs interface and doesn't
use the standard kernel LED subsystem. It supports three devices:

Delcom Visual Signal Indicator
The driver supports generation 1 of the device only which was
manufactured until 2008. Remove support for this device completely.

Riso Kagaku RGB LED + Dream Cheeky Webmail Notifier
These devices are HID compliant and will be supported by a new driver
under drivers/hid utilizing the kernel LED subsystem.

So let's remove the USB LED driver.

Signed-off-by: Heiner Kallweit <hkallweit1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 drivers/usb/misc/Kconfig  |   9 --
 drivers/usb/misc/Makefile |   1 -
 drivers/usb/misc/usbled.c | 273 ----------------------------------------------
 3 files changed, 283 deletions(-)
 delete mode 100644 drivers/usb/misc/usbled.c

diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index e9e5ae5..9e5c835 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -79,15 +79,6 @@ config USB_LCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called usblcd.
 
-config USB_LED
-	tristate "USB LED driver support"
-	help
-	  Say Y here if you want to connect an USBLED device to your 
-	  computer's USB port.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called usbled.
-
 config USB_CYPRESS_CY7C63
 	tristate "Cypress CY7C63xxx USB driver support"
 	help
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 2769cf6..3d79faa 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_USB_IOWARRIOR)		+= iowarrior.o
 obj-$(CONFIG_USB_ISIGHTFW)		+= isight_firmware.o
 obj-$(CONFIG_USB_LCD)			+= usblcd.o
 obj-$(CONFIG_USB_LD)			+= ldusb.o
-obj-$(CONFIG_USB_LED)			+= usbled.o
 obj-$(CONFIG_USB_LEGOTOWER)		+= legousbtower.o
 obj-$(CONFIG_USB_RIO500)		+= rio500.o
 obj-$(CONFIG_USB_TEST)			+= usbtest.o
diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
deleted file mode 100644
index bdef0d6..0000000
--- a/drivers/usb/misc/usbled.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * USB LED driver
- *
- * Copyright (C) 2004 Greg Kroah-Hartman (greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org)
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-
-
-#define DRIVER_AUTHOR "Greg Kroah-Hartman, greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org"
-#define DRIVER_DESC "USB LED Driver"
-
-enum led_type {
-	DELCOM_VISUAL_SIGNAL_INDICATOR,
-	DREAM_CHEEKY_WEBMAIL_NOTIFIER,
-	RISO_KAGAKU_LED
-};
-
-/* the Webmail LED made by RISO KAGAKU CORP. decodes a color index
-   internally, we want to keep the red+green+blue sysfs api, so we decode
-   from 1-bit RGB to the riso kagaku color index according to this table... */
-
-static unsigned const char riso_kagaku_tbl[] = {
-/* R+2G+4B -> riso kagaku color index */
-	[0] = 0, /* black   */
-	[1] = 2, /* red     */
-	[2] = 1, /* green   */
-	[3] = 5, /* yellow  */
-	[4] = 3, /* blue    */
-	[5] = 6, /* magenta */
-	[6] = 4, /* cyan    */
-	[7] = 7  /* white   */
-};
-
-#define RISO_KAGAKU_IX(r,g,b) riso_kagaku_tbl[((r)?1:0)+((g)?2:0)+((b)?4:0)]
-
-/* table of devices that work with this driver */
-static const struct usb_device_id id_table[] = {
-	{ USB_DEVICE(0x0fc5, 0x1223),
-			.driver_info = DELCOM_VISUAL_SIGNAL_INDICATOR },
-	{ USB_DEVICE(0x1d34, 0x0004),
-			.driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER },
-	{ USB_DEVICE(0x1d34, 0x000a),
-			.driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER },
-	{ USB_DEVICE(0x1294, 0x1320),
-			.driver_info = RISO_KAGAKU_LED },
-	{ },
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-struct usb_led {
-	struct usb_device	*udev;
-	unsigned char		blue;
-	unsigned char		red;
-	unsigned char		green;
-	enum led_type		type;
-};
-
-static void change_color(struct usb_led *led)
-{
-	int retval = 0;
-	unsigned char *buffer;
-	int actlength;
-
-	buffer = kmalloc(8, GFP_KERNEL);
-	if (!buffer) {
-		dev_err(&led->udev->dev, "out of memory\n");
-		return;
-	}
-
-	switch (led->type) {
-	case DELCOM_VISUAL_SIGNAL_INDICATOR: {
-		unsigned char color = 0x07;
-
-		if (led->blue)
-			color &= ~0x04;
-		if (led->red)
-			color &= ~0x02;
-		if (led->green)
-			color &= ~0x01;
-		dev_dbg(&led->udev->dev,
-			"blue = %d, red = %d, green = %d, color = %.2x\n",
-			led->blue, led->red, led->green, color);
-
-		retval = usb_control_msg(led->udev,
-					usb_sndctrlpipe(led->udev, 0),
-					0x12,
-					0xc8,
-					(0x02 * 0x100) + 0x0a,
-					(0x00 * 0x100) + color,
-					buffer,
-					8,
-					2000);
-		break;
-	}
-
-	case DREAM_CHEEKY_WEBMAIL_NOTIFIER:
-		dev_dbg(&led->udev->dev,
-			"red = %d, green = %d, blue = %d\n",
-			led->red, led->green, led->blue);
-
-		buffer[0] = led->red;
-		buffer[1] = led->green;
-		buffer[2] = led->blue;
-		buffer[3] = buffer[4] = buffer[5] = 0;
-		buffer[6] = 0x1a;
-		buffer[7] = 0x05;
-
-		retval = usb_control_msg(led->udev,
-					usb_sndctrlpipe(led->udev, 0),
-					0x09,
-					0x21,
-					0x200,
-					0,
-					buffer,
-					8,
-					2000);
-		break;
-
-	case RISO_KAGAKU_LED:
-		buffer[0] = RISO_KAGAKU_IX(led->red, led->green, led->blue);
-		buffer[1] = 0;
-		buffer[2] = 0;
-		buffer[3] = 0;
-		buffer[4] = 0;
-
-		retval = usb_interrupt_msg(led->udev,
-			usb_sndctrlpipe(led->udev, 2),
-			buffer, 5, &actlength, 1000 /*ms timeout*/);
-		break;
-
-	default:
-		dev_err(&led->udev->dev, "unknown device type %d\n", led->type);
-	}
-
-	if (retval)
-		dev_dbg(&led->udev->dev, "retval = %d\n", retval);
-	kfree(buffer);
-}
-
-#define show_set(value)	\
-static ssize_t show_##value(struct device *dev, struct device_attribute *attr,\
-			    char *buf)					\
-{									\
-	struct usb_interface *intf = to_usb_interface(dev);		\
-	struct usb_led *led = usb_get_intfdata(intf);			\
-									\
-	return sprintf(buf, "%d\n", led->value);			\
-}									\
-static ssize_t set_##value(struct device *dev, struct device_attribute *attr,\
-			   const char *buf, size_t count)		\
-{									\
-	struct usb_interface *intf = to_usb_interface(dev);		\
-	struct usb_led *led = usb_get_intfdata(intf);			\
-	int temp = simple_strtoul(buf, NULL, 10);			\
-									\
-	led->value = temp;						\
-	change_color(led);						\
-	return count;							\
-}									\
-static DEVICE_ATTR(value, S_IRUGO | S_IWUSR, show_##value, set_##value);
-show_set(blue);
-show_set(red);
-show_set(green);
-
-static int led_probe(struct usb_interface *interface,
-		     const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(interface);
-	struct usb_led *dev = NULL;
-	int retval = -ENOMEM;
-
-	dev = kzalloc(sizeof(struct usb_led), GFP_KERNEL);
-	if (dev == NULL) {
-		dev_err(&interface->dev, "out of memory\n");
-		goto error_mem;
-	}
-
-	dev->udev = usb_get_dev(udev);
-	dev->type = id->driver_info;
-
-	usb_set_intfdata(interface, dev);
-
-	retval = device_create_file(&interface->dev, &dev_attr_blue);
-	if (retval)
-		goto error;
-	retval = device_create_file(&interface->dev, &dev_attr_red);
-	if (retval)
-		goto error;
-	retval = device_create_file(&interface->dev, &dev_attr_green);
-	if (retval)
-		goto error;
-
-	if (dev->type == DREAM_CHEEKY_WEBMAIL_NOTIFIER) {
-		unsigned char *enable;
-
-		enable = kmemdup("\x1f\x02\0\x5f\0\0\x1a\x03", 8, GFP_KERNEL);
-		if (!enable) {
-			dev_err(&interface->dev, "out of memory\n");
-			retval = -ENOMEM;
-			goto error;
-		}
-
-		retval = usb_control_msg(udev,
-					usb_sndctrlpipe(udev, 0),
-					0x09,
-					0x21,
-					0x200,
-					0,
-					enable,
-					8,
-					2000);
-
-		kfree(enable);
-		if (retval != 8)
-			goto error;
-	}
-
-	dev_info(&interface->dev, "USB LED device now attached\n");
-	return 0;
-
-error:
-	device_remove_file(&interface->dev, &dev_attr_blue);
-	device_remove_file(&interface->dev, &dev_attr_red);
-	device_remove_file(&interface->dev, &dev_attr_green);
-	usb_set_intfdata(interface, NULL);
-	usb_put_dev(dev->udev);
-	kfree(dev);
-error_mem:
-	return retval;
-}
-
-static void led_disconnect(struct usb_interface *interface)
-{
-	struct usb_led *dev;
-
-	dev = usb_get_intfdata(interface);
-
-	device_remove_file(&interface->dev, &dev_attr_blue);
-	device_remove_file(&interface->dev, &dev_attr_red);
-	device_remove_file(&interface->dev, &dev_attr_green);
-
-	/* first remove the files, then set the pointer to NULL */
-	usb_set_intfdata(interface, NULL);
-
-	usb_put_dev(dev->udev);
-
-	kfree(dev);
-
-	dev_info(&interface->dev, "USB LED now disconnected\n");
-}
-
-static struct usb_driver led_driver = {
-	.name =		"usbled",
-	.probe =	led_probe,
-	.disconnect =	led_disconnect,
-	.id_table =	id_table,
-};
-
-module_usb_driver(led_driver);