From mboxrd@z Thu Jan 1 00:00:00 1970 From: bugtrack@alsa-project.org Subject: [ALSA - driver 0001347]: unable to configure sound card Date: Wed, 17 Aug 2005 11:05:08 +0200 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from bugtrack.alsa-project.org (gate.perex.cz [82.113.61.162]) by alsa.jcu.cz (ALSA's E-mail Delivery System) with ESMTP id C83D8210 for ; Wed, 17 Aug 2005 11:05:08 +0200 (MEST) Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org The following issue has been SUBMITTED. ====================================================================== ====================================================================== Reported By: CptS Assigned To: tiwai ====================================================================== Project: ALSA - driver Issue ID: 1347 Category: PCI - nm256 Reproducibility: always Severity: major Priority: normal Status: assigned Distribution: Knoppix 4.0 Kernel Version: 2.6.11 ====================================================================== Date Submitted: 08-17-2005 11:05 CEST Last Modified: 08-17-2005 11:05 CEST ====================================================================== Summary: unable to configure sound card Description: I'm having problems configuring my sound card with alsa, here are the details: the sound card is NeoMagic 256AV (NM2200) located onboard a Compaq Presario 1920. I'm currently running Knoppix 4.0 hdd installed (kernel 2.6) here's lspci -vv outputs on the cards: 0000:01:00.1 Multimedia audio controller: Neomagic Corporation NM2200 [MagicMedia 256AV Audio] (rev 20) Subsystem: Compaq Computer Corporation MagicMedia 256AV Audio Device on Durango Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- I wouldn't have addressed you unless I've already tried everything: I've tried the solution of the same problem regarding HP Omni 4150 with the same card. I used alsaconf and it tried to load snd-nm256, after loading it crashed, dmesg suggested loading it with force_ac97=1 switch but once i did it the system crashed (on 3 differet linux installations) I did a legacy scan using alsaconf for all legacy drivers. I 'modprobe'ed for hours on every imaginable option (ad1848, sb, cs423x, etc..) I've edited the modules.conf and manually defined the dma and irq I removed alsa completly and re-install it. I had debian with 2.4 kernel installed and i've upgraded to 2.6 I changed the distro from debian to Knoppix (kinda same thing but...) anyway, you get the point.. can you please assist??I'm having problems configuring my sound card with alsa, here are the details: the sound card is NeoMagic 256AV (NM2200) located onboard a Compaq Presario 1920. I'm currently running Knoppix 4.0 hdd installed (kernel 2.6) here's lspci -vv outputs on the cards: 0000:01:00.1 Multimedia audio controller: Neomagic Corporation NM2200 [MagicMedia 256AV Audio] (rev 20) Subsystem: Compaq Computer Corporation MagicMedia 256AV Audio Device on Durango Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- I wouldn't have addressed you unless I've already tried everything: I've tried the solution of the same problem regarding HP Omni 4150 with the same card. I used alsaconf and it tried to load snd-nm256, after loading it crashed, dmesg suggested loading it with force_ac97=1 switch but once i did it the system crashed (on 3 differet linux installations) I did a legacy scan using alsaconf for all legacy drivers. I 'modprobe'ed for hours on every imaginable option (ad1848, sb, cs423x, etc..) I've edited the modules.conf and manually defined the dma and irq I removed alsa completly and re-install it. I had debian with 2.4 kernel installed and i've upgraded to 2.6 I changed the distro from debian to Knoppix (kinda same thing but...) anyway, you get the point.. can you please assist??I'm having problems configuring my sound card with alsa, here are the details: the sound card is NeoMagic 256AV (NM2200) located onboard a Compaq Presario 1920. I'm currently running Knoppix 4.0 hdd installed (kernel 2.6) here's lspci -vv outputs on the cards: 0000:01:00.1 Multimedia audio controller: Neomagic Corporation NM2200 [MagicMedia 256AV Audio] (rev 20) Subsystem: Compaq Computer Corporation MagicMedia 256AV Audio Device on Durango Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- I wouldn't have addressed you unless I've already tried everything: I've tried the solution of the same problem regarding HP Omni 4150 with the same card. I used alsaconf and it tried to load snd-nm256, after loading it crashed, dmesg suggested loading it with force_ac97=1 switch but once i did it the system crashed (on 3 differet linux installations) I did a legacy scan using alsaconf for all legacy drivers. I 'modprobe'ed for hours on every imaginable option (ad1848, sb, cs423x, etc..) I've edited the modules.conf and manually defined the dma and irq I removed alsa completly and re-install it. I had debian with 2.4 kernel installed and i've upgraded to 2.6 I changed the distro from debian to Knoppix (kinda same thing but...) anyway, you get the point.. can you please assist?? ====================================================================== Issue History Date Modified Username Field Change ====================================================================== 08-17-05 11:05 CptS New Issue 08-17-05 11:05 CptS Distribution => Knoppix 4.0 08-17-05 11:05 CptS Kernel Version => 2.6.11 ====================================================================== ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf