All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Michael Walle <michael@walle.cc>, linux-kernel@vger.kernel.org
Cc: linux-mmc@vger.kernel.org, Ulf Hansson <ulf.hansson@linaro.org>,
	yangbo lu <yangbo.lu@freescale.com>
Subject: Re: [PATCH v3] mmc: sdhci-of-esdhc: fixup PRESENT_STATE read
Date: Tue, 15 Nov 2016 09:11:04 +0200	[thread overview]
Message-ID: <bd5c78ca-746a-2a96-4b44-ee14ce39b917@intel.com> (raw)
In-Reply-To: <1479136348-30706-1-git-send-email-michael@walle.cc>

On 14/11/16 17:12, Michael Walle wrote:
> Since commit 87a18a6a5652 ("mmc: mmc: Use ->card_busy() to detect busy
> cards in __mmc_switch()") the ESDHC driver is broken:
>   mmc0: Card stuck in programming state! __mmc_switch
>   mmc0: error -110 whilst initialising MMC card
> 
> Since this commit __mmc_switch() uses ->card_busy(), which is
> sdhci_card_busy() for the esdhc driver. sdhci_card_busy() uses the
> PRESENT_STATE register, specifically the DAT0 signal level bit. But the
> ESDHC uses a non-conformant PRESENT_STATE register, thus a read fixup is
> required to make the driver work again.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>
> Fixes: 87a18a6a5652 ("mmc: mmc: Use ->card_busy() to detect busy cards in __mmc_switch()")
> ---
> v3:
>  - explain the bits in the comments
>  - use bits[19:0] from the original value, all other will be taken from the
>    fixup value.
> 
> v2:
>  - use lower bits of the original value (that was actually a typo)
>  - add fixes tag
>  - fix typo
> 
>  drivers/mmc/host/sdhci-of-esdhc.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
> index fb71c86..74cf3b1 100644
> --- a/drivers/mmc/host/sdhci-of-esdhc.c
> +++ b/drivers/mmc/host/sdhci-of-esdhc.c
> @@ -66,6 +66,19 @@ static u32 esdhc_readl_fixup(struct sdhci_host *host,
>  			return ret;
>  		}
>  	}
> +	/*
> +	 * The DAT[3:0] line signal levels and the CMD line signal level are
> +	 * not compatible with standard SDHC register. The line signal levels
> +	 * DAT[7:0] are at bits 31:24 and the line signal level is at bit 23.
> +	 * All other bits are the same as in the standard SDHC register.
> +	 */
> +	if (spec_reg == SDHCI_PRESENT_STATE) {
> +		ret = value & 0x000fffff;
> +		ret |= (value >> 4) & SDHCI_DATA_LVL_MASK;
> +		ret |= (value << 1) & 0x01000000;

Please define the command line level bit in sdhci.h and use that here.
e.g.

diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 766df17fb7eb..2570455b219a 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -73,6 +73,7 @@
 #define  SDHCI_DATA_LVL_MASK	0x00F00000
 #define   SDHCI_DATA_LVL_SHIFT	20
 #define   SDHCI_DATA_0_LVL_MASK	0x00100000
+#define  SDHCI_CMD_LVL		0x01000000
 
 #define SDHCI_HOST_CONTROL	0x28
 #define  SDHCI_CTRL_LED		0x01


> +		return ret;
> +	}
> +
>  	ret = value;
>  	return ret;
>  }
> 


  parent reply	other threads:[~2016-11-15  7:16 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-14 15:12 [PATCH v3] mmc: sdhci-of-esdhc: fixup PRESENT_STATE read Michael Walle
2016-11-15  6:12 ` Y.B. Lu
2016-11-15  7:11 ` Adrian Hunter [this message]
2016-11-15  7:28 ` Alexander Stein

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bd5c78ca-746a-2a96-4b44-ee14ce39b917@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=michael@walle.cc \
    --cc=ulf.hansson@linaro.org \
    --cc=yangbo.lu@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.