All of lore.kernel.org
 help / color / mirror / Atom feed
From: Riana Tauro <riana.tauro@intel.com>
To: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>,
	<igt-dev@lists.freedesktop.org>
Cc: <anshuman.gupta@intel.com>, <lucas.demarchi@intel.com>,
	<rodrigo.vivi@intel.com>, <kamil.konieczny@linux.intel.com>,
	<louis.chauvet@bootlin.com>
Subject: Re: [PATCH i-g-t 5/5] tests/intel/xe_configfs: Add test to validate survivability mode
Date: Tue, 13 May 2025 10:55:20 +0530	[thread overview]
Message-ID: <bdca3dde-d4fc-4d97-9cad-a06bf112bb4d@intel.com> (raw)
In-Reply-To: <da1100ab-79ba-42a8-923c-dea399557e3f@linux.intel.com>

Hi Aravind

On 5/5/2025 12:38 PM, Aravind Iddamsetty wrote:
> 
> On 22-04-2025 15:26, Riana Tauro wrote:
>> The test validates if survivability mode is enabled on supported
>> platforms when configured using configfs attribute.
>>
>> Signed-off-by: Riana Tauro <riana.tauro@intel.com>
>> ---
>>   tests/intel/xe_configfs.c | 112 ++++++++++++++++++++++++++++++++++++++
>>   tests/meson.build         |   1 +
>>   2 files changed, 113 insertions(+)
>>   create mode 100644 tests/intel/xe_configfs.c
>>
>> diff --git a/tests/intel/xe_configfs.c b/tests/intel/xe_configfs.c
>> new file mode 100644
>> index 000000000..414af4a86
>> --- /dev/null
>> +++ b/tests/intel/xe_configfs.c
>> @@ -0,0 +1,112 @@
>> +// SPDX-License-Identifier: MIT
>> +/*
>> + * Copyright © 2025 Intel Corporation
>> + */
>> +#include <limits.h>
>> +
>> +#include "igt.h"
>> +#include "igt_configfs.h"
>> +#include "igt_device.h"
>> +#include "igt_fs.h"
>> +#include "igt_kmod.h"
>> +#include "igt_sysfs.h"
>> +
>> +/**
>> + * TEST: Check configfs userspace API
>> + * Category: Core
>> + * Mega feature: General Core features
>> + * Sub-category: uapi
>> + * Functionality: configfs
>> + * Description: validate configfs entries
>> + * Test category: functionality test
>> + */
>> +
>> +static char bus_addr[NAME_MAX];
>> +static uint32_t dev_id;
>> +
>> +static void restore(int sig)
>> +{
>> +	/* Restore after survivability mode */
>> +	igt_kmod_unbind("xe", bus_addr);
>> +	igt_kmod_bind("xe", bus_addr);
>> +}
>> +
>> +static void set_survivability_mode(int dir_fd, bool value)
>> +{
>> +	igt_kmod_unbind("xe", bus_addr);
>> +	igt_sysfs_set_boolean(dir_fd, "survivability_mode", value);
>> +	igt_kmod_bind("xe", bus_addr);
>> +}
>> +
>> +static void check_survivability_mode(void)
>> +{
>> +	char path[PATH_MAX], buf[4096];
>> +	int fd, len;
>> +
>> +	snprintf(path, PATH_MAX, "/sys/bus/pci/devices/%s", bus_addr);
>> +	fd = open(path, O_RDONLY);
>> +	igt_assert_f(fd >= 0, "Cannot open %s\n", path);
>> +
>> +	len = igt_sysfs_read(fd, "survivability_mode", buf, sizeof(buf) - 1);
>> +	if (len > 0) {
>> +		buf[len] = '\0';
>> +		igt_info("Survivability Mode:\n%s", buf);
>> +	}
>> +	close(fd);
> 
> Also, existence of survivability_mode file should be sufficient to
> indicate we are in that mode, no need to read it.

Yeah existence should be enough, since it is using configfs. Will remove 
the read

> 
>> +
>> +	if (IS_BATTLEMAGE(dev_id))
>> +		igt_assert_f(len > 0, "Survivability mode not set\n");
>> +}
>> +
>> +/**
>> + * SUBTEST: survivability-mode
>> + * Description: Validate survivability mode by setting configfs
>> + */
>> +static void test_survivability_mode(int dir_fd)
>> +{
>> +	/* Enable survivability mode */
>> +	set_survivability_mode(dir_fd, true);
>> +
>> +	check_survivability_mode();
>> +}
>> +
>> +static int create_device_configfs(int configfs_fd, int fd)
>> +{
>> +	int dir_fd;
>> +	struct pci_device *pci_dev;
>> +
>> +	pci_dev = igt_device_get_pci_device(fd);
>> +	snprintf(bus_addr, sizeof(bus_addr), "%04x:%02x:%02x.%01x",
>> +		 pci_dev->domain, pci_dev->bus, pci_dev->dev, pci_dev->func);
>> +
>> +	dir_fd = igt_fs_create_dir(configfs_fd, bus_addr, 0755);
> 
> it would be good to use S_IRWXU type flags rather than 0755

Wanted to understand why?
> 
>> +	igt_assert(dir_fd);
>> +
>> +	return dir_fd;
>> +}
>> +
>> +igt_main
>> +{
>> +	int fd, configfs_fd, dir_fd;
>> +
>> +	igt_fixture {
>> +		fd = drm_open_driver(DRIVER_XE);
>> +		dev_id = intel_get_drm_devid(fd);
>> +		configfs_fd = igt_configfs_open("xe");
>> +		igt_require(configfs_fd != -1);
>> +		dir_fd = create_device_configfs(configfs_fd, fd);
>> +	}
>> +
>> +	igt_describe("Validate survivability mode");
>> +	igt_subtest("survivability-mode") {
>> +		igt_install_exit_handler(restore);
>> +		test_survivability_mode(dir_fd);

> should this be restricted to platforms which support survivability mode.

Will make this specific to BMG

Thanks
Riana

>> +	}
>> +
>> +	igt_fixture {
>> +		igt_fs_remove_dir(configfs_fd, bus_addr);
>> +		close(dir_fd);
>> +		close(configfs_fd);
>> +		close(fd);
>> +	}
>> +}
>> diff --git a/tests/meson.build b/tests/meson.build
>> index 8cb3fc4d2..e0e9ed299 100644
>> --- a/tests/meson.build
>> +++ b/tests/meson.build
>> @@ -279,6 +279,7 @@ intel_xe_progs = [
>>   	'xe_compute',
>>   	'xe_compute_preempt',
>>   	'xe_copy_basic',
>> +	'xe_configfs',
>>   	'xe_dma_buf_sync',
>>   	'xe_drm_fdinfo',
>>   	'xe_eu_stall',
> Thanks,
> Aravind.

  reply	other threads:[~2025-05-13  5:25 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-22  9:55 [PATCH i-g-t 0/5] Add test to validate survivability mode Riana Tauro
2025-04-22  9:55 ` [PATCH i-g-t 1/5] lib/igt_aux: Move is_mountpoint() to igt_aux Riana Tauro
2025-04-22  9:55 ` [PATCH i-g-t 2/5] lib/igt_configfs: Add helper to mount configfs Riana Tauro
2025-05-05  5:35   ` Aravind Iddamsetty
2025-05-07 11:05   ` José Expósito
2025-05-07 15:57   ` Kamil Konieczny
2025-04-22  9:55 ` [PATCH i-g-t 3/5] lib/igt_fs: Rename igt_io to igt_fs to add additional helpers Riana Tauro
2025-05-05  5:35   ` Aravind Iddamsetty
2025-05-07 11:08   ` José Expósito
2025-05-07 15:58   ` Kamil Konieczny
2025-04-22  9:56 ` [PATCH i-g-t 4/5] lib/igt_fs: Add helper functions to create and remove directories Riana Tauro
2025-05-05  5:35   ` Aravind Iddamsetty
2025-05-07 13:31   ` José Expósito
2025-05-07 15:48   ` Kamil Konieczny
2025-04-22  9:56 ` [PATCH i-g-t 5/5] tests/intel/xe_configfs: Add test to validate survivability mode Riana Tauro
2025-04-22 13:57   ` Lucas De Marchi
2025-04-22 19:29     ` Rodrigo Vivi
2025-04-24  4:17       ` Lucas De Marchi
2025-04-24  5:41         ` Riana Tauro
2025-05-12 10:54           ` Riana Tauro
2025-05-12 14:50             ` Lucas De Marchi
2025-04-24 13:00         ` Rodrigo Vivi
2025-05-05  7:08   ` Aravind Iddamsetty
2025-05-13  5:25     ` Riana Tauro [this message]
2025-04-22 19:51 ` ✓ i915.CI.BAT: success for Add test to validate survivability mode (rev2) Patchwork
2025-04-23  1:36 ` ✗ Xe.CI.Full: failure " Patchwork
2025-04-23  5:57 ` ✗ i915.CI.Full: " Patchwork
2025-04-23 21:59 ` ✓ Xe.CI.BAT: success " Patchwork
2025-04-24  9:51 ` ✗ Xe.CI.Full: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bdca3dde-d4fc-4d97-9cad-a06bf112bb4d@intel.com \
    --to=riana.tauro@intel.com \
    --cc=anshuman.gupta@intel.com \
    --cc=aravind.iddamsetty@linux.intel.com \
    --cc=igt-dev@lists.freedesktop.org \
    --cc=kamil.konieczny@linux.intel.com \
    --cc=louis.chauvet@bootlin.com \
    --cc=lucas.demarchi@intel.com \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.