[U-Boot] [GIT PULL] Xilinx and SCSI changes

[Michal Simek <michal.simek@xilinx.com>]

Hi Tom,

here are some patches I have collected for Xilinx devices, one miiphy
patch and SCSI changes I have made.

Simon: I have sent v4 of DM_SCSI + ceva sata driver moved to DM which
should go through your tree because you have applied
"dm: blk: Fix get_desc to return block device descriptor"
which is required. They are based on this branch.

Tom: I have tested also travis with zynq qemu but it looks like a
problem with qemu timing for zynq model. The rest of python tests look
good. https://travis-ci.org/michalsimek-test/u-boot/jobs/180384185
Also for running this I had to use CONFIG_OF_EMBED=y to handle dtb.
Anyway I will talk to Qemu guys what I can do with it and when this
timing issue was solved and which mainline qemu version this requires.
Is there arm64 qemu available too?

Thanks,
Michal


 The following changes since commit
9ae0e14350758e6447c90615ff4df530549a45e2:

   Merge git://www.denx.de/git/u-boot-marvell (2016-12-01 09:24:02 -0500)

 are available in the git repository at:


   git://www.denx.de/git/u-boot-microblaze.git master

 for you to fetch changes up to 861fe6503e205622202a61d3ca86cd4ccb80bf03:

   cmd: scsi: Make private functions static (2016-12-02 14:37:32 +0100)

 ----------------------------------------------------------------
 Masahiro Yamada (1):
       ARM: zynq(mp): remove unneeded CONFIG_USB_MAX_CONTROLLER_COUNT
defines

 Michal Simek (14):
       ARM64: zynqmp: Force certain bootmode for SPL
       ARM64: zynqmp: Use DTS name for different psu_init_gpl* files in SPL
       ARM64: zynqmp: List secondary software boot modes
       common: miiphyutil: Work and report phy address in hex in mdio cmd
       scsi: Extract block device initialization
       scsi: Extract device detection algorithm
       scsi: Take lun from device block description
       scsi: Move pccb buffer initalization directly to scsi_detect_dev
       scsi: Simplify scsi_read/scsi_write()
       scsi: Remove completely unused functions
       scsi: Make private functions static
       scsi: Change scsi_scan() to be able to return value
       scsi: Separate SCSI private block description initialization
       cmd: scsi: Make private functions static

 Siva Durga Prasad Paladugu (1):
       ARM: zynq: Enable SD1 and qspi for picozed board

  arch/arm/cpu/armv8/zynqmp/Kconfig           |  10 +-
  arch/arm/cpu/armv8/zynqmp/spl.c             |   4 +
  arch/arm/dts/zynq-picozed.dts               |  12 +++
  arch/arm/include/asm/arch-zynqmp/hardware.h |   3 +
  board/xilinx/zynqmp/Makefile                |   2 +-
  cmd/mdio.c                                  |   6 +-
  cmd/scsi.c                                  |  18 ++--
  common/miiphyutil.c                         |   2 +-
  common/scsi.c                               | 288
+++++++++++++++++++++++++++++---------------------------
  drivers/net/zynq_gem.c                      |   2 +-
  include/configs/xilinx_zynqmp.h             |   1 -
  include/configs/zynq-common.h               |   1 -
  include/scsi.h                              |   5 +-
  13 files changed, 194 insertions(+), 160 deletions(-)