Re: [PATCH v2 1/6] net: fix typos in comments

[Jijie Shao <shaojijie@huawei.com>]

on 2026/9/7 12:46, Hemanth Selam wrote:
> Fix typos in comments, reported by scripts/checkpatch.pl using the
> misspelling list in scripts/spelling.txt.  Only touches comments, no code
> changes.
>
> Assisted-by: Cursor:claude-opus-5
> Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>

For the hns and hns3 driver parts, the changes look good to me. Thanks,
Reviewed-by: Jijie Shao <shaojijie@huawei.com>

> ---
>   drivers/net/dsa/bcm_sf2_cfp.c                          |  2 +-
>   drivers/net/dsa/microchip/ksz_dcb.c                    |  2 +-

...

>   		pause_aneg_en:1,
> diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
> index 91391a49fcea..a59fd280a045 100644
> --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
> +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
> @@ -591,7 +591,7 @@ static int hns_mac_config_sds_loopback(struct hns_mac_cb *mac_cb, bool en)
>   #define HILINK_ACCESS_SEL_CFG		0x40008
>   			/* hilink4 & hilink3 use the same xge training and
>   			 * xge u adaptor. There is a hilink access sel cfg
> -			 * register to select which one to be configed
> +			 * register to select which one to be configured
>   			 */
>   			if ((!HNS_DSAF_IS_DEBUG(mac_cb->dsaf_dev)) &&
>   			    (mac_cb->mac_id <= 3))
> diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c
> index 5013beb4d282..408d36d85fb1 100644
> --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c
> +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c
> @@ -139,7 +139,7 @@ static void hns_ppe_set_vlan_strip(struct hns_ppe_cb *ppe_cb, int en)
>   }
>   
>   /**
> - * hns_ppe_checksum_hw - set ppe checksum caculate
> + * hns_ppe_checksum_hw - set ppe checksum calculate
>    * @ppe_cb: ppe device
>    * @value: value
>    */
> diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
> index e905f10b894e..d819d2bb3450 100644
> --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
> +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
> @@ -1230,7 +1230,7 @@ static void hns_nic_update_stats(struct net_device *netdev)
>   	h->dev->ops->update_stats(h, &netdev->stats);
>   }
>   
> -/* set mac addr if it is configed. or leave it to the AE driver */
> +/* set mac addr if it is configured. or leave it to the AE driver */
>   static void hns_init_mac_addr(struct net_device *ndev)
>   {
>   	struct hns_nic_priv *priv = netdev_priv(ndev);
> @@ -2317,7 +2317,7 @@ static int hns_nic_dev_probe(struct platform_device *pdev)
>   		ret = device_property_read_u32(dev, "port-id", &port_id);
>   		if (ret)
>   			goto out_read_prop_fail;
> -		/* for old dts, we need to caculate the port offset */
> +		/* for old dts, we need to calculate the port offset */
>   		port_id = port_id < HNS_SRV_OFFSET ? port_id + HNS_DEBUG_OFFSET
>   			: port_id - HNS_SRV_OFFSET;
>   	}
> diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
> index e6af939c1c19..bf35f55f5b8f 100644
> --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
> +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
> @@ -10527,7 +10527,7 @@ static int hclge_get_link_diagnosis_info(struct hnae3_handle *handle,
>   }
>   
>   /* After disable sriov, VF still has some config and info need clean,
> - * which configed by PF.
> + * which configured by PF.
>    */
>   static void hclge_clear_vport_vf_info(struct hclge_vport *vport, int vfid)
>   {
> diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
> index 00c3f2548bf6..bf533b8f46ae 100644
> --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
> +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
> @@ -35,7 +35,7 @@ enum hclge_shaper_level {
>    * IR(Mbps) = -------------------------  *  CLOCK(1000Mbps)
>    *		Tick * (2 ^ IR_s)
>    *
> - * @return: 0: calculate sucessful, negative: fail
> + * @return: 0: calculate successful, negative: fail
>    */
>   static int hclge_shaper_para_calc(u32 ir, u8 shaper_level,
>   				  struct hclge_shaper_ir_para *ir_para,
> diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
> index 063a692c2b41..5d14d29b0296 100644
> --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
> +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
> @@ -1880,7 +1880,7 @@ static void hclgevf_reset_service_task(struct hclgevf_dev *hdev)
>   		 * from PF as cmdq would be in unreliable state i.e. mailbox
>   		 * communication between PF and VF would be broken.
>   		 *
> -		 * if we are never geting into pending state it means either:
> +		 * if we are never getting into pending state it means either:
>   		 * 1. PF is not receiving our request which could be due to IMP
>   		 *    reset
>   		 * 2. PF is screwed

...