From: Milton Miller <miltonm@bga.com>
To: linuxppc-dev@ozlabs.org
Cc: Paul Mackerras <paulus@samba.org>
Subject: [PATCH 5/7] bootwrapper: missing relocation in crt0.S
Date: Mon, 19 Mar 2007 14:58:05 -0600 (CST) [thread overview]
Message-ID: <boot-05.miltonm@bga.com> (raw)
In-Reply-To: <boot-00.miltonm@bga.com>
crt0.S had provisions to provide run address relocaton to got2 and
cache flush, but not on the bss clear or stack pointer load. Apply
the same fixup for them.
---
Compiles and links. Stack is created within the image when linked at
4M and run at 0. Did not verify bss relocation.
crt0.S | 9 +++++++++
1 file changed, 9 insertions(+)
Index: kernel/arch/powerpc/boot/crt0.S
===================================================================
--- kernel.orig/arch/powerpc/boot/crt0.S 2007-03-16 23:22:00.000000000 -0500
+++ kernel/arch/powerpc/boot/crt0.S 2007-03-16 23:42:42.000000000 -0500
@@ -63,21 +63,30 @@ _zimage_start:
/* Clear the BSS */
lis r9,__bss_start@ha
addi r9,r9,__bss_start@l
+ add r9,r0,r9
lis r8,_end@ha
addi r8,r8,_end@l
+ add r8,r0,r8
li r0,0
5: stw r0,0(r9)
addi r9,r9,4
cmplw cr0,r9,r8
blt 5b
+ /* recreate relocation offset */
+ lis r9,_end@ha
+ addi r9,r9,_end@l
+ subf r0,r9,r8
+
/* Possibly set up a custom stack */
.weak _platform_stack_top
lis r8,_platform_stack_top@ha
addi r8,r8,_platform_stack_top@l
cmpwi r8,0
beq 6f
+ add r8,r0,r8
lwz r1,0(r8)
+ add r1,r0,r1
li r0,0
stwu r0,-16(r1) /* establish a stack frame */
6:
next prev parent reply other threads:[~2007-03-19 21:06 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-19 20:55 [PATCH 0/7] boot: cleanup and prep for more platforms Milton Miller
2007-03-19 20:58 ` [PATCH 3/7] boot: use FORCE Milton Miller
2007-03-20 15:52 ` Segher Boessenkool
2007-03-19 20:58 ` [PATCH 4/7] bootwrapper: add a fatal error helper Milton Miller
2007-03-20 0:38 ` David Gibson
2007-03-20 13:38 ` Milton Miller
2007-03-21 0:01 ` David Gibson
2007-03-19 20:58 ` [PATCH 2/7] boot: rebuild when wrapper changes Milton Miller
2007-03-20 0:36 ` David Gibson
2007-03-20 15:50 ` Segher Boessenkool
2007-03-19 20:58 ` Milton Miller [this message]
2007-03-20 0:39 ` [PATCH 5/7] bootwrapper: missing relocation in crt0.S David Gibson
2007-03-20 20:09 ` Mark A. Greer
2007-03-19 20:58 ` [PATCH 6/7] bootwrapper: allow platforms to call library zImage_start Milton Miller
2007-03-20 4:55 ` David Gibson
2007-03-19 20:58 ` [PATCH 7/7] boot: export flush_cache Milton Miller
2007-03-20 4:55 ` David Gibson
2007-03-19 20:58 ` [PATCH 1/7] boot: use a common zImage rule Milton Miller
2007-03-20 3:30 ` David Gibson
2007-03-20 13:47 ` Milton Miller
2007-03-20 17:41 ` Mark A. Greer
2007-03-21 2:46 ` David Gibson
2007-03-21 15:02 ` [PATCH 0/8] boot: cleanup and prep for more platforms Milton Miller
2007-03-21 15:02 ` [PATCH 6/8] boot: use FORCE Milton Miller
2007-03-21 15:02 ` [PATCH 1/8] bootwrapper: add a fatal error helper Milton Miller
2007-03-21 15:02 ` [PATCH 5/8] boot: rebuild when wrapper changes Milton Miller
2007-03-21 15:02 ` [PATCH 3/8] bootwrapper: allow platforms to call library zImage_start Milton Miller
2007-03-21 15:02 ` [PATCH 2/8] bootwrapper: missing relocation in crt0.S Milton Miller
2007-03-23 5:25 ` Paul Mackerras
2007-03-28 8:21 ` [PATCH 0/4] boot: cleanup and prep for more platforms Milton Miller
2007-03-28 8:21 ` [PATCH 1/4] bootwrapper: missing relocation in crt0.S Milton Miller
2007-03-28 8:21 ` [RFC] bootwrapper: allow vmlinuz to be an external payload Milton Miller
2007-03-28 8:21 ` Patch: [PATCH 3/4] bootwrapper: no gzip fixes Milton Miller
2007-03-28 20:03 ` Scott Wood
2007-03-28 8:21 ` [PATCH 2/4] bootwrapper: remove unused variable Milton Miller
2007-03-28 8:34 ` David Gibson
2007-03-28 16:04 ` Milton Miller
2007-03-28 8:21 ` [PATCH 4/4] bootwrapper: decompress less, check more Milton Miller
2007-03-29 13:31 ` Milton Miller
2007-03-21 15:03 ` [PATCH 4/8] boot: export flush_cache Milton Miller
2007-03-21 15:03 ` [PATCH 7/8] boot: clean rule fixes Milton Miller
2007-03-21 15:03 ` [PATCH 8/8] boot: use a common zImage rule Milton Miller
2007-03-22 3:46 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=boot-05.miltonm@bga.com \
--to=miltonm@bga.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.