[Bug 1024] [dpdk-22.07][meson test] driver-tests/link_bonding_mode4_autotest bond handshake failed

[bugzilla@dpdk.org]

https://bugs.dpdk.org/show_bug.cgi?id=1024

            Bug ID: 1024
           Summary: [dpdk-22.07][meson test]
                    driver-tests/link_bonding_mode4_autotest bond
                    handshake failed
           Product: DPDK
           Version: unspecified
          Hardware: All
                OS: All
            Status: UNCONFIRMED
          Severity: normal
          Priority: Normal
         Component: meson
          Assignee: dev@dpdk.org
          Reporter: weiyuanx.li@intel.com
  Target Milestone: ---

Environment
DPDK version: dpdk-22.07-rc0:eeab353b793109432538ba480a44de5dd3048032
Other software versions: name/version for QEMU, OVS, etc. Repeat as required.
OS: Ubuntu 22.04 LTS/ 5.15.0-27-generic
Compiler: gcc (Ubuntu 11.2.0-19ubuntu1) 11.2.0
Hardware platform: Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz
NIC hardware: Ethernet Controller XXV710 for 25GbE SFP28 158b.
NIC firmware: i40e-5.15.0-27-generic/8.70 0x8000c40f 1.3179.0

Test Setup
Steps to reproduce
List the steps to reproduce the issue.

1. Use the following command to build DPDK: 
CC=gcc meson -Denable_kmods=True -Dlibdir=lib --default-library=static
x86_64-native-linuxapp-gcc/ ninja -C x86_64-native-linuxapp-gcc/ 

2. Execute the following command in the dpdk directory. 
meson test -C x86_64-native-linuxapp-gcc link_bonding_mode4_autotest -t 0.1

Show the output from the previous commands.
1/1 DPDK:driver-tests / link_bonding_mode4_autotest FAIL           22.68s  
killed by signal 11 SIGSEGV
09:33:43 DPDK_TEST=link_bonding_mode4_autotest MALLOC_PERTURB_=42
/root/dpdk/x86_64-native-linuxapp-gcc/app/test/dpdk-test
----------------------------------- output -----------------------------------
stdout:
RTE>>link_bonding_mode4_autotest^M
 + ------------------------------------------------------- +
 + Test Suite : Link Bonding mode 4 Unit Test Suite
 + ------------------------------------------------------- +
 + TestCase [ 0] : test_mode4_agg_mode_selection failed
 + TestCase [ 1] : test_mode4_lacp succeeded
 + TestCase [ 2] : test_mode4_rx succeeded
 + TestCase [ 3] : test_mode4_tx_burst succeeded
 + TestCase [ 4] : test_mode4_marker succeeded
 + TestCase [ 5] : test_mode4_expired succeeded
 + TestCase [ 6] : test_mode4_ext_ctrl succeeded
 + TestCase [ 7] : test_mode4_ext_lacp succeeded
 + ------------------------------------------------------- +
 + Test Suite Summary : Link Bonding mode 4 Unit Test Suite
 + ------------------------------------------------------- +
 + Tests Total :        8
 + Tests Skipped :      0
 + Tests Executed :     8
 + Tests Unsupported:   0
 + Tests Passed :       7
 + Tests Failed :       1
 + ------------------------------------------------------- +
Test Failed
RTE>>
stderr:
EAL: Detected CPU lcores: 72
EAL: Detected NUMA nodes: 2
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'VA'
EAL: VFIO support initialized
EAL: Using IOMMU type 1 (Type 1)
EAL: Ignore mapping IO port bar(1)
EAL: Ignore mapping IO port bar(4)
EAL: Probe PCI driver: net_i40e (8086:158b) device: 0000:81:00.0 (socket 1)
APP: HPET is not enabled, using TSC as default timer
bond_ethdev_mode_set(1587) - Using mode 4, it is necessary to do TX burst and
RX burst at least every 100ms.
Device with port_id=1 already started
Device with port_id=2 already started
Device with port_id=3 already started
Device with port_id=4 already started
EAL: Test assert bond_handshake line 643 failed: Bond handshake failedEAL: Test
assert test_mode4_agg_mode_selection line 680 failed: Initial handshake failed
Device with port_id=1 already stopped

Expected Result
Test OK

Regression
Is this issue a regression: (Y/N) Y
First run it by using "meson test"

-- 
You are receiving this mail because:
You are the assignee for the bug.