From: bugzilla-daemon@bugzilla.kernel.org
To: linux-scsi@vger.kernel.org
Subject: [Bug 103061] New: kernel BUG at drivers/scsi/qla2xxx/qla_isr.c:2242
Date: Tue, 18 Aug 2015 10:06:20 +0000 [thread overview]
Message-ID: <bug-103061-11613@https.bugzilla.kernel.org/> (raw)
https://bugzilla.kernel.org/show_bug.cgi?id=103061
Bug ID: 103061
Summary: kernel BUG at drivers/scsi/qla2xxx/qla_isr.c:2242
Product: SCSI Drivers
Version: 2.5
Kernel Version: 3.10.0
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: high
Priority: P1
Component: QLOGIC QLA2XXX
Assignee: scsi_drivers-qla2xxx@kernel-bugs.osdl.org
Reporter: gaofeng.guo@memblaze.com
Regression: No
one initiator
one target
set /sys/module/qla2xxx/parameters/ql2xmaxqdepth 512
while do io test, we meet the issue
syslog
[10343.908025] qla2xxx [0000:01:00.0]-801c:12: Abort command issued
nexus=12:0:0 -- 1 2002.
[10344.907437] qla2xxx [0000:01:00.0]-801c:12: Abort command issued
nexus=12:0:0 -- 1 2002.
[10345.906840] qla2xxx [0000:01:00.0]-801c:12: Abort command issued
nexus=12:0:0 -- 1 2002.
[10346.906245] qla2xxx [0000:01:00.0]-801c:12: Abort command issued
nexus=12:0:0 -- 1 2002.
[10399.853793] qla2xxx [0000:01:00.0]-801c:12: Abort command issued
nexus=12:0:0 -- 1 2002.
[10406.796828] BUG: unable to handle kernel NULL pointer dereference at
0000000000000084
[10406.796953] IP: [<ffffffffa0989871>] qla2x00_status_entry+0x3d1/0x1150
[qla2xxx]
[10406.797071] PGD 0
[10406.797184] Oops: 0000 [#1] SMP
[10406.797293] Modules linked in: qla2xxx scsi_transport_fc scsi_tgt fuse btrfs
zlib_deflate raid6_pq xor msdos ext4 mbcache jbd2 binfmt_misc ipt_MASQUERADE
xt_CHECKSUM ip6t_rpfilter ip6t_REJECT ipt_REJECT xt_conntrack ebtable_nat
ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat
nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security
ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4
nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security
iptable_raw iptable_filter ip_tables sg vfat fat snd_hda_codec_realtek
snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep
snd_seq snd_seq_device mxm_wmi coretemp mei_me mei snd_pcm kvm_intel kvm
crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel
[10406.799038] aesni_intel lrw gf128mul glue_helper ablk_helper cryptd
snd_page_alloc snd_timer snd soundcore wmi shpchp pcspkr serio_raw mperf
acpi_pad nfsd auth_rpcgss nfs_acl lockd uinput sunrpc xfs libcrc32c sd_mod
crc_t10dif crct10dif_common i915 ahci i2c_algo_bit libahci e1000e
drm_kms_helper libata drm ptp pps_core i2c_core video dm_mirror dm_region_hash
dm_log dm_mod [last unloaded: scsi_tgt]
[10406.800987] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 3.10.0-123.el7.x86_64
#1
[10406.801523] Hardware name: MSI MS-7915/Z97 MPOWER (MS-7915), BIOS V1.6
09/19/2014
[10406.802080] task: ffff880418c25b00 ti: ffff880418c3a000 task.ti:
ffff880418c3a000
[10406.802657] RIP: 0010:[<ffffffffa0989871>] [<ffffffffa0989871>]
qla2x00_status_entry+0x3d1/0x1150 [qla2xxx]
[10406.803278] RSP: 0018:ffff88042fb43ce0 EFLAGS: 00010046
[10406.803903] RAX: 0000000000000000 RBX: 0000000000000000 RCX:
ffffffffa09d0780
[10406.804553] RDX: 0000000000000000 RSI: ffff880415176740 RDI:
0000000008000000
[10406.805211] RBP: ffff88042fb43de0 R08: 0000000000000029 R09:
0000000000000000
[10406.805882] R10: ffff8803bcd7a140 R11: ffff8803bd103100 R12:
ffff880412c08000
[10406.806567] R13: ffff880415176740 R14: 0000000000000029 R15:
00000000000e0000
[10406.807265] FS: 0000000000000000(0000) GS:ffff88042fb40000(0000)
knlGS:0000000000000000
[10406.807987] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[10406.808719] CR2: 0000000000000084 CR3: 00000000018ce000 CR4:
00000000001407e0
[10406.809474] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[10406.810235] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[10406.811001] Stack:
[10406.811768] 00000000000000ef ffffffffa09db6cf ffff880400000000
ffffffff00000000
[10406.812579] 0000000000000000 ffff880400000000 00000000000000ef
ffffffff00000000
[10406.813399] 0000000000000000 0000000000000000 0000000000000000
ffff880400000000
[10406.814223] Call Trace:
[10406.815047] <IRQ>
[10406.815056]
[10406.815887] [<ffffffffa09c64e2>] ? qlt_async_event+0x72/0x310 [qla2xxx]
[10406.816746] [<ffffffffa098b37e>] qla24xx_process_response_queue+0x32e/0x5c0
[qla2xxx]
[10406.817629] [<ffffffff81089535>] ? enqueue_hrtimer+0x25/0x80
[10406.818522] [<ffffffff81089e8a>] ? __hrtimer_start_range_ns+0x1ca/0x410
[10406.819433] [<ffffffffa098d49b>] qla24xx_msix_rsp_q+0x4b/0xc0 [qla2xxx]
[10406.820356] [<ffffffff810f717e>] handle_irq_event_percpu+0x3e/0x1e0
[10406.821290] [<ffffffff810f735d>] handle_irq_event+0x3d/0x60
[10406.822229] [<ffffffff810f9fe7>] handle_edge_irq+0x77/0x130
[10406.823177] [<ffffffff81014c3f>] handle_irq+0xbf/0x150
[10406.824130] [<ffffffff815ed78a>] ? atomic_notifier_call_chain+0x1a/0x20
[10406.825101] [<ffffffff815f434f>] do_IRQ+0x4f/0xf0
[10406.826078] [<ffffffff815e94ad>] common_interrupt+0x6d/0x6d
[10406.827068] <EOI>
[10406.827076]
[10406.828044] [<ffffffff814834e2>] ? cpuidle_enter_state+0x52/0xc0
[10406.829015] [<ffffffff81483615>] cpuidle_idle_call+0xc5/0x200
[10406.829980] [<ffffffff8101bc7e>] arch_cpu_idle+0xe/0x30
[10406.830949] [<ffffffff810b4725>] cpu_startup_entry+0xf5/0x290
[10406.831901] [<ffffffff815cfee1>] start_secondary+0x265/0x27b
[10406.832799] Code: 00 48 89 54 24 40 0f b7 55 c2 89 54 24 38 0f b6 57 28 89
54 24 30 0f b6 57 29 89 54 24 28 0f b6 57 2a bf 00 00 00 08 89 54 24 20 <8b> 90
84 00 00 00 89 54 24 18 8b 80 80 00 00 00 ba 22 30 00 00
[10406.834676] RIP [<ffffffffa0989871>] qla2x00_status_entry+0x3d1/0x1150
[qla2xxx]
[10406.835563] RSP <ffff88042fb43ce0>
[10406.836417] CR2: 0000000000000084
--
You are receiving this mail because:
You are watching the assignee of the bug.
reply other threads:[~2015-08-18 10:06 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-103061-11613@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.