From: bugzilla-daemon@freedesktop.org
To: dri-devel@lists.freedesktop.org
Subject: [Bug 104825] [amdgpu] [drm:gfx_v8_0_hw_fini] *ERROR* KCQ disabled failed (scratch(0xC040)=0x00000000) when unbinding
Date: Mon, 29 Jan 2018 06:57:03 +0000 [thread overview]
Message-ID: <bug-104825-502@http.bugs.freedesktop.org/> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 5646 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=104825
Bug ID: 104825
Summary: [amdgpu] [drm:gfx_v8_0_hw_fini] *ERROR* KCQ disabled
failed (scratch(0xC040)=0x00000000) when unbinding
Product: DRI
Version: XOrg git
Hardware: x86-64 (AMD64)
OS: Linux (All)
Status: NEW
Severity: normal
Priority: medium
Component: DRM/AMDgpu
Assignee: dri-devel@lists.freedesktop.org
Reporter: mlen@mlen.pl
I use two amdgpu rx480 cards. During boot one of them is rebound to vfio-pci
driver using the following script:
pci_ids=("0000:03:00.0" "0000:03:00.1")
for id in "${pci_ids[@]}"; do
vendor="$(cat "/sys/bus/pci/devices/$id/vendor")"
device="$(cat "/sys/bus/pci/devices/$id/device")"
if [ -e "/sys/bus/pci/devices/$id/driver/unbind" ]; then
echo "$id" >"/sys/bus/pci/devices/$id/driver/unbind"
fi
echo "$vendor $device" >/sys/bus/pci/drivers/vfio-pci/new_id
done
Starting from Linux 4.15 with amdgpu DC enabled (I wanted to use it for HDMI
audio), unbind operation causes general protection failure:
[ 68.011473] [drm] amdgpu: finishing device.
[ 68.377945] [drm:gfx_v8_0_hw_fini] *ERROR* KCQ disabled failed
(scratch(0xC040)=0x00000000)
[ 68.575193] [drm:gfx_v8_0_hw_fini] *ERROR* KCQ disabled failed
(scratch(0xC040)=0x00000000)
[ 68.770107] [drm:gfx_v8_0_hw_fini] *ERROR* KCQ disabled failed
(scratch(0xC040)=0x00000000)
[ 68.971775] [drm:gfx_v8_0_hw_fini] *ERROR* KCQ disabled failed
(scratch(0xC040)=0x00000000)
[ 69.164265] [drm:gfx_v8_0_hw_fini] *ERROR* KCQ disabled failed
(scratch(0xC040)=0x00000000)
[ 69.350089] [drm:gfx_v8_0_hw_fini] *ERROR* KCQ disabled failed
(scratch(0xC040)=0x00000000)
[ 69.538302] [drm:gfx_v8_0_hw_fini] *ERROR* KCQ disabled failed
(scratch(0xC040)=0x00000000)
[ 69.729260] [drm:gfx_v8_0_hw_fini] *ERROR* KCQ disabled failed
(scratch(0xC040)=0x00000000)
[ 69.729733] general protection fault: 0000 [#1] PREEMPT SMP PTI
[ 69.730901] Modules linked in:
[ 69.731936] CPU: 2 PID: 3934 Comm: openrc-run.sh Not tainted 4.15.0-gentoo
#2
[ 69.733009] Hardware name: ASUSTeK COMPUTER INC. Z10PE-D16 WS/Z10PE-D16 WS,
BIOS 3407 03/10/2017
[ 69.734240] RIP: 0010:dm_read_reg_func.isra.0+0x3/0xc
[ 69.735314] RSP: 0018:ffffa80d8bd4fc40 EFLAGS: 00010282
[ 69.736353] RAX: ccea607dac10c354 RBX: ffff95af35bfca80 RCX:
0000000180200008
[ 69.737408] RDX: 0000000180200009 RSI: 0000000000005c02 RDI:
ffff95af362b91c0
[ 69.738494] RBP: ffff95af35b75c90 R08: 0000000000000001 R09:
ffffffffb30fced2
[ 69.739561] R10: ffff95af2f770a40 R11: 00000000ffffff80 R12:
ffff95af35f30100
[ 69.740638] R13: 0000000000000000 R14: ffff95af358a3c20 R15:
ffff95bf2d5f9c20
[ 69.742007] FS: 00007fe7530af740(0000) GS:ffff95af3da00000(0000)
knlGS:0000000000000000
[ 69.743083] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 69.744134] CR2: 000000c420870008 CR3: 0000001027426003 CR4:
00000000003606e0
[ 69.745190] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 69.746246] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[ 69.747320] Call Trace:
[ 69.748359] destroy+0x21/0x9c
[ 69.749395] dal_i2caux_destruct+0x6f/0xab
[ 69.750459] destroy+0x15/0x27
[ 69.751495] dal_i2caux_destroy+0x26/0x2f
[ 69.752537] destruct+0x86/0xfd
[ 69.753571] dc_destroy+0x11/0x22
[ 69.754626] dm_hw_fini+0x1e/0x22
[ 69.755632] amdgpu_fini+0xf3/0x2d6
[ 69.756616] amdgpu_device_fini+0x5c/0x158
[ 69.757597] amdgpu_driver_unload_kms+0x6b/0x7e
[ 69.758601] drm_dev_unregister+0x4c/0xc6
[ 69.759584] amdgpu_pci_remove+0x19/0x37
[ 69.760576] pci_device_remove+0x3b/0x8b
[ 69.761563] device_release_driver_internal+0x125/0x1f9
[ 69.762580] unbind_store+0x60/0x90
[ 69.763568] kernfs_fop_write+0x111/0x159
[ 69.764557] __vfs_write+0x33/0xd7
[ 69.765543] ? preempt_count_sub+0x8b/0x94
[ 69.766552] ? __sb_start_write+0xc0/0x180
[ 69.767525] vfs_write+0xa5/0xe2
[ 69.768490] SyS_write+0x5f/0xa3
[ 69.769439] do_syscall_64+0x72/0x81
[ 69.770419] entry_SYSCALL64_slow_path+0x25/0x25
[ 69.771373] RIP: 0033:0x7fe7529a1408
[ 69.772324] RSP: 002b:00007ffe1885c200 EFLAGS: 00000246 ORIG_RAX:
0000000000000001
[ 69.773300] RAX: ffffffffffffffda RBX: 000000000000000d RCX:
00007fe7529a1408
[ 69.774290] RDX: 000000000000000d RSI: 0000558994641890 RDI:
0000000000000001
[ 69.775290] RBP: 0000558994641890 R08: 000000000000000a R09:
00005589946475f0
[ 69.776260] R10: 000000000000009b R11: 0000000000000246 R12:
000000000000000d
[ 69.777248] R13: 0000000000000001 R14: 00007fe752c6e740 R15:
000000000000000d
[ 69.778244] Code: f7 74 24 04 89 43 5c 48 8b 4c 24 08 65 48 33 0c 25 28 00
00 00 4c 89 e0 74 05 e8 39 58 9e ff 48 83 c4 10 5b 5d 41 5c c3 48 8b 07 <48> 8b
40 30 e9 03 4a 70 00 0f 1f 44 00 00 48 8b 47 30 8b 70 04
[ 69.779406] RIP: dm_read_reg_func.isra.0+0x3/0xc RSP: ffffa80d8bd4fc40
[ 69.780491] ---[ end trace 6aa4681ba3a43ec3 ]---
[ 71.815503] [drm:amdgpu_fill_buffer] *ERROR* Trying to clear memory with
ring turned off.
[ 71.899258] amdgpu 0000:03:00.0: vgaarb: changed VGA decodes:
olddecodes=io+mem,decodes=none:owns=none
[ 71.899263] amdgpu 0000:02:00.0: vgaarb: changed VGA decodes:
olddecodes=io+mem,decodes=none:owns=none
[ 72.217918] [drm:amdgpu_fill_buffer] *ERROR* Trying to clear memory with
ring turned off.
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 7102 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2018-01-29 6:57 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-29 6:57 bugzilla-daemon [this message]
2018-01-29 15:47 ` [Bug 104825] [amdgpu] [drm:gfx_v8_0_hw_fini] *ERROR* KCQ disabled failed (scratch(0xC040)=0x00000000) when unbinding bugzilla-daemon
2018-01-30 8:00 ` bugzilla-daemon
2018-01-31 7:21 ` bugzilla-daemon
2018-02-27 0:09 ` bugzilla-daemon
2018-02-27 10:55 ` bugzilla-daemon
2018-02-27 11:48 ` bugzilla-daemon
2018-02-27 14:51 ` bugzilla-daemon
2018-02-27 15:20 ` bugzilla-daemon
2018-02-27 15:30 ` bugzilla-daemon
2018-02-27 16:17 ` bugzilla-daemon
2018-02-27 18:10 ` bugzilla-daemon
2018-02-27 18:12 ` bugzilla-daemon
2018-02-27 19:01 ` bugzilla-daemon
2018-02-27 19:17 ` bugzilla-daemon
2018-03-27 18:02 ` bugzilla-daemon
2018-03-27 20:20 ` bugzilla-daemon
2018-03-29 16:07 ` bugzilla-daemon
2018-03-29 19:55 ` bugzilla-daemon
2018-04-01 9:51 ` bugzilla-daemon
2018-04-02 20:49 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-104825-502@http.bugs.freedesktop.org/ \
--to=bugzilla-daemon@freedesktop.org \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.