From: bugzilla-daemon@bugzilla.kernel.org
To: dri-devel@lists.freedesktop.org
Subject: [Bug 106341] New: radeon - monitors fail to sync with modes with vertical refresh rate under 60 Hz on FirePro V4800
Date: Tue, 20 Oct 2015 12:08:30 +0000 [thread overview]
Message-ID: <bug-106341-2300@https.bugzilla.kernel.org/> (raw)
https://bugzilla.kernel.org/show_bug.cgi?id=106341
Bug ID: 106341
Summary: radeon - monitors fail to sync with modes with
vertical refresh rate under 60 Hz on FirePro V4800
Product: Drivers
Version: 2.5
Kernel Version: 4.3.0-rc6
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Video(DRI - non Intel)
Assignee: drivers_video-dri@kernel-bugs.osdl.org
Reporter: tim@seoss.co.uk
Regression: No
With newer kernels, display resolutions under 60Hz the attached monitors (tried
multiple with multiple modes on DVI and display port) fail to sync.
Working kernel: 3.16.0-4-amd64 (Debian)
Non working: 4.1.0 (Debian), and 4.3.0-rc6 (mainline).
My main monitor is a 4k resolution monitor which will only supports 30Hz at the
default full native resolution.
[ 14.102283] [drm] radeon kernel modesetting enabled.
[ 14.103946] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 -
0x000000003FFFFFFF (1024M used)
[ 14.104022] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 -
0x000000007FFFFFFF
[ 14.105476] [drm] radeon: 1024M of VRAM memory ready
[ 14.105672] [drm] radeon: 1024M of GTT memory ready.
[ 14.108782] radeon 0000:01:00.0: firmware: direct-loading firmware
radeon/REDWOOD_pfp.bin
[ 14.109799] radeon 0000:01:00.0: firmware: direct-loading firmware
radeon/REDWOOD_me.bin
[ 14.114441] radeon 0000:01:00.0: firmware: direct-loading firmware
radeon/REDWOOD_rlc.bin
[ 14.117105] radeon 0000:01:00.0: firmware: direct-loading firmware
radeon/REDWOOD_smc.bin
[ 14.143419] [drm] radeon: dpm initialized
[ 14.144488] radeon 0000:01:00.0: firmware: direct-loading firmware
radeon/CYPRESS_uvd.bin
[ 14.145853] [drm] enabling PCIE gen 2 link speeds, disable with
radeon.pcie_gen2=0
[ 14.154866] radeon 0000:01:00.0: WB enabled
[ 14.154910] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr
0x0000000040000c00 and cpu addr 0xffff88033072ac00
[ 14.154975] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr
0x0000000040000c0c and cpu addr 0xffff88033072ac0c
[ 14.155929] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr
0x000000000005c418 and cpu addr 0xffffc9000241c418
[ 14.156093] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 14.156159] radeon 0000:01:00.0: radeon: using MSI.
[ 14.156242] [drm] radeon: irq initialized.
[ 15.443703] fbcon: radeondrmfb (fb0) is primary device
[ 15.669263] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 15.669288] radeon 0000:01:00.0: registered panic notifier
[ 15.679661] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on
minor 0
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI]
Redwood XT GL [FirePro V4800] (prog-if 00 [VGA controller])
Subsystem: Dell Device 240a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fbce0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at c000 [size=256]
Expansion ROM at fbcc0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1
unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Exit
Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-,
OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-,
OBFF Disabled
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000feeff00c Data: 4172
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
Len=010 <?>
Capabilities: [150 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Kernel driver in use: radeon
--
You are receiving this mail because:
You are watching the assignee of the bug.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2015-10-20 12:08 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-20 12:08 bugzilla-daemon [this message]
2015-10-20 12:08 ` [Bug 106341] radeon - monitors fail to sync with modes with vertical refresh rate under 60 Hz on FirePro V4800 bugzilla-daemon
2015-10-21 2:40 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-106341-2300@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.