Commen=
t # 3
on bug 10687=
9
from javcasalc
$ cat /var/log/Xorg.0.log
[ 6.892] (--) Log file renamed from "/var/log/Xorg.pid-1146.log&qu=
ot; to
"/var/log/Xorg.0.log"
[ 6.893]=20
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 6.893] X Protocol Version 11, Revision 0
[ 6.893] Build Operating System: Linux 4.17.0-1-MANJARO x86_64=20
[ 6.893] Current Operating System: Linux hpzbook 4.17.0-2-MANJARO #1 SMP
PREEMPT Fri Jun 8 07:13:17 UTC 2018 x86_64
[ 6.893] Kernel command line: BOOT_IMAGE=3D/boot/vmlinuz-4.17-x86_64
root=3DUUID=3Da3029513-f1e8-4a4d-8ca9-29722da10afd rw quiet splash
resume=3DUUID=3D4d14319d-10d0-47c3-8253-66a8880dd983
[ 6.893] Build Date: 20 May 2018 06:17:37PM
[ 6.893]=20=20
[ 6.893] Current version of pixman: 0.34.0
[ 6.893] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.893] Markers: (--) probed, (**) from config file, (=3D=3D) default =
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.893] (=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Mon =
Jun 18 10:11:28
2018
[ 6.894] (=3D=3D) Using config directory: "/etc/X11/xorg.conf.d&qu=
ot;
[ 6.894] (=3D=3D) Using system config directory "/usr/share/X11/xo=
rg.conf.d"
[ 6.894] (=3D=3D) No Layout section. Using the first Screen section.
[ 6.894] (=3D=3D) No screen section available. Using defaults.
[ 6.894] (**) |-->Screen "Default Screen Section" (0)
[ 6.894] (**) | |-->Monitor "<default monitor>"
[ 6.895] (=3D=3D) No monitor specified for screen "Default Screen =
Section".
Using a default monitor configuration.
[ 6.895] (=3D=3D) Automatically adding devices
[ 6.895] (=3D=3D) Automatically enabling devices
[ 6.895] (=3D=3D) Automatically adding GPU devices
[ 6.895] (=3D=3D) Automatically binding GPU devices
[ 6.895] (=3D=3D) Max clients allowed: 256, resource mask: 0x1fffff
[ 6.895] (WW) The directory "/usr/share/fonts/OTF/" does not =
exist.
[ 6.895] Entry deleted from font path.
[ 6.895] (WW) The directory "/usr/share/fonts/Type1/" does no=
t exist.
[ 6.895] Entry deleted from font path.
[ 6.895] (WW) `fonts.dir' not found (or not valid) in
"/usr/share/fonts/100dpi/".
[ 6.895] Entry deleted from font path.
[ 6.895] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 6.895] (WW) `fonts.dir' not found (or not valid) in
"/usr/share/fonts/75dpi/".
[ 6.895] Entry deleted from font path.
[ 6.895] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 6.895] (=3D=3D) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 6.895] (=3D=3D) ModulePath set to "/usr/lib/xorg/modules"
[ 6.895] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 6.895] (II) Loader magic: 0x561eb7409d40
[ 6.895] (II) Module ABI versions:
[ 6.895] X.Org ANSI C Emulation: 0.4
[ 6.895] X.Org Video Driver: 23.0
[ 6.895] X.Org XInput driver : 24.1
[ 6.895] X.Org Server Extension : 10.0
[ 6.896] (++) using VT number 1
[ 6.897] (II) systemd-logind: logind integration requires -keeptty and
-keeptty was not provided, disabling logind integration
[ 6.898] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6.900] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 6.906] (--) PCI:*(0:0:2:0) 8086:5917:103c:83b2 rev 7, Mem @
0x1ff2000000/16777216, 0xb0000000/268435456, I/O @ 0x00004000/64, BIOS =
@
0x????????/131072
[ 6.906] (--) PCI: (0:1:0:0) 1002:6985:103c:83b5 rev 0, Mem @
0xc0000000/268435456, 0xd0000000/2097152, 0xea300000/262144, I/O @
0x00003000/256, BIOS @ 0x????????/131072
[ 6.906] (II) Open ACPI successful (/var/run/acpid.socket)
[ 6.906] (II) LoadModule: "glx"
[ 6.907] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.909] (II) Module glx: vendor=3D"X.Org Foundation"
[ 6.909] compiled for 1.19.6, module version =3D 1.0.0
[ 6.909] ABI class: X.Org Server Extension, version 10.0
[ 6.909] (II) Applying OutputClass "intel" to /dev/dri/card0
[ 6.909] loading driver: modesetting
[ 6.909] (II) Applying OutputClass "AMDgpu" to /dev/dri/card1
[ 6.910] loading driver: amdgpu
[ 6.910] (=3D=3D) Matched modesetting as autoconfigured driver 0
[ 6.910] (=3D=3D) Matched intel as autoconfigured driver 1
[ 6.910] (=3D=3D) Matched amdgpu as autoconfigured driver 2
[ 6.910] (=3D=3D) Matched ati as autoconfigured driver 3
[ 6.910] (=3D=3D) Matched intel as autoconfigured driver 4
[ 6.910] (=3D=3D) Matched modesetting as autoconfigured driver 5
[ 6.910] (=3D=3D) Matched fbdev as autoconfigured driver 6
[ 6.910] (=3D=3D) Matched vesa as autoconfigured driver 7
[ 6.910] (=3D=3D) Assigned the driver to the xf86ConfigLayout
[ 6.910] (II) LoadModule: "modesetting"
[ 6.910] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 6.910] (II) Module modesetting: vendor=3D"X.Org Foundation"
[ 6.910] compiled for 1.19.6, module version =3D 1.19.6
[ 6.910] Module class: X.Org Video Driver
[ 6.910] ABI class: X.Org Video Driver, version 23.0
[ 6.910] (II) LoadModule: "intel"
[ 6.910] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 6.911] (II) Module intel: vendor=3D"X.Org Foundation"
[ 6.911] compiled for 1.19.6, module version =3D 2.99.917
[ 6.911] Module class: X.Org Video Driver
[ 6.911] ABI class: X.Org Video Driver, version 23.0
[ 6.911] (II) LoadModule: "amdgpu"
[ 6.911] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 6.912] (II) Module amdgpu: vendor=3D"X.Org Foundation"
[ 6.912] compiled for 1.19.6, module version =3D 18.0.1
[ 6.912] Module class: X.Org Video Driver
[ 6.912] ABI class: X.Org Video Driver, version 23.0
[ 6.912] (II) LoadModule: "ati"
[ 6.912] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 6.913] (II) Module ati: vendor=3D"X.Org Foundation"
[ 6.913] compiled for 1.19.6, module version =3D 18.0.1
[ 6.913] Module class: X.Org Video Driver
[ 6.913] ABI class: X.Org Video Driver, version 23.0
[ 6.933] (II) LoadModule: "fbdev"
[ 6.934] (WW) Warning, couldn't open module fbdev
[ 6.934] (II) UnloadModule: "fbdev"
[ 6.934] (II) Unloading fbdev
[ 6.934] (EE) Failed to load module "fbdev" (module does not =
exist, 0)
[ 6.934] (II) LoadModule: "vesa"
[ 6.935] (WW) Warning, couldn't open module vesa
[ 6.935] (II) UnloadModule: "vesa"
[ 6.935] (II) Unloading vesa
[ 6.935] (EE) Failed to load module "vesa" (module does not e=
xist, 0)
[ 6.935] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 6.935] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q3=
3,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 6.935] (II) intel: Driver for Intel(R) HD Graphics
[ 6.935] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 6.935] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 6.935] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 6.949] (II) modeset(0): using drv /dev/dri/card0
[ 6.949] (WW) Falling back to old probe method for modesetting
[ 6.966] (II) modeset(G0): using drv /dev/dri/card1
[ 6.967] (II) modeset(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 6.967] (=3D=3D) modeset(0): Depth 24, (=3D=3D) framebuffer bpp 32
[ 6.967] (=3D=3D) modeset(0): RGB weight 888
[ 6.967] (=3D=3D) modeset(0): Default visual is TrueColor
[ 6.967] (II) Loading sub module "glamoregl"
[ 6.967] (II) LoadModule: "glamoregl"
[ 6.967] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 6.976] (II) Module glamoregl: vendor=3D"X.Org Foundation"
[ 6.976] compiled for 1.19.6, module version =3D 1.0.0
[ 6.976] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.976] (II) glamor: OpenGL accelerated X.org driver based.
[ 7.006] (II) glamor: EGL version 1.4 (DRI2):
[ 7.015] (II) modeset(0): glamor initialized
[ 7.016] (II) modeset(0): Output eDP-1 has no monitor section
[ 7.016] (II) modeset(0): Output DP-1 has no monitor section
[ 7.019] (II) modeset(0): Output HDMI-1 has no monitor section
[ 7.020] (II) modeset(0): Output DP-2 has no monitor section
[ 7.023] (II) modeset(0): Output HDMI-2 has no monitor section
[ 7.024] (II) modeset(0): EDID for output eDP-1
[ 7.024] (II) modeset(0): Manufacturer: LGD Model: 599 Serial#: 0
[ 7.024] (II) modeset(0): Year: 2017 Week: 0
[ 7.024] (II) modeset(0): EDID Version: 1.4
[ 7.024] (II) modeset(0): Digital Display Input
[ 7.024] (II) modeset(0): 6 bits per channel
[ 7.024] (II) modeset(0): Digital interface is DisplayPort
[ 7.024] (II) modeset(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 7.024] (II) modeset(0): Gamma: 2.20
[ 7.024] (II) modeset(0): No DPMS capabilities specified
[ 7.024] (II) modeset(0): Supported color encodings: RGB 4:4:4=20
[ 7.024] (II) modeset(0): First detailed timing is preferred mode
[ 7.025] (II) modeset(0): Preferred mode is native pixel format and ref=
resh
rate
[ 7.025] (II) modeset(0): redX: 0.570 redY: 0.350 greenX: 0.338 green=
Y:
0.575
[ 7.025] (II) modeset(0): blueX: 0.160 blueY: 0.117 whiteX: 0.313 whi=
teY:
0.329
[ 7.025] (II) modeset(0): Manufacturer's mask: 0
[ 7.025] (II) modeset(0): Supported detailed timing:
[ 7.025] (II) modeset(0): clock: 138.7 MHz Image Size: 309 x 174 mm
[ 7.025] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000
h_blank_end 2080 h_border: 0
[ 7.025] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088
v_blanking: 1111 v_border: 0
[ 7.025] (II) modeset(0): Supported detailed timing:
[ 7.025] (II) modeset(0): clock: 92.4 MHz Image Size: 309 x 174 mm
[ 7.025] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000
h_blank_end 2080 h_border: 0
[ 7.025] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088
v_blanking: 1111 v_border: 0
[ 7.025] (II) modeset(0): Unknown vendor-specific block 2
[ 7.025] (II) modeset(0): EDID (in hex):
[ 7.025] (II) modeset(0): 00ffffffffffff0030e4990500000000
[ 7.025] (II) modeset(0): 001b0104951f11780229059259569329
[ 7.025] (II) modeset(0): 1e505400000001010101010101010101
[ 7.025] (II) modeset(0): 0101010101012e3680a070381f403020
[ 7.025] (II) modeset(0): 350035ae100000191b2480a070381f40
[ 7.025] (II) modeset(0): 3020350035ae10000019000000000000
[ 7.025] (II) modeset(0): 00000000000000000000000000000002
[ 7.025] (II) modeset(0): 000c44ff0a3c6e100e1a6e000000003a
[ 7.025] (II) modeset(0): Printing probed modes for output eDP-1
[ 7.025] (II) modeset(0): Modeline "1920x1080"x60.0 138.70 =
1920 1968 2000
2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 7.025] (II) modeset(0): Modeline "1920x1080"x120.0 356.38 =
1920 2080
2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 7.025] (II) modeset(0): Modeline "1920x1080"x119.9 266.50 =
1920 1944
1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 7.025] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 =
1920 2048 2248
2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 7.025] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 =
1920 1968 2000
2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 7.025] (II) modeset(0): Modeline "1920x1080"x40.0 92.43 =
1920 1968 2000
2080 1080 1083 1088 1111 -hsync -vsync (44.4 kHz e)
[ 7.025] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 =
1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 7.025] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 =
1680 1728 1760
1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 7.025] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 =
1400 1488 1640
1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 7.025] (II) modeset(0): Modeline "1600x900"x120.0 246.00 =
1600 1728 1900
2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 7.025] (II) modeset(0): Modeline "1600x900"x119.9 186.50 =
1600 1624 1640
1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 7.025] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1=
600 1696 1856
2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 7.026] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1=
600 1648 1680
1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 7.026] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 =
1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 7.026] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1=
400 1480 1624
1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 7.026] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1=
400 1448 1480
1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 7.026] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1=
280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 7.026] (II) modeset(0): Modeline "1440x810"x120.0 198.12 =
1440 1548 1704
1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 7.026] (II) modeset(0): Modeline "1440x810"x119.9 151.88 =
1440 1464 1480
1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 7.026] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1=
368 1440 1576
1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 7.026] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1=
368 1416 1448
1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 7.026] (II) modeset(0): Modeline "1280x800"x120.0 174.25 =
1280 1380 1516
1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 7.026] (II) modeset(0): Modeline "1280x800"x119.9 134.25 =
1280 1304 1320
1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 7.026] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1=
280 1352 1480
1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 7.026] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1=
280 1328 1360
1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 7.026] (II) modeset(0): Modeline "1280x720"x120.0 156.12 =
1280 1376 1512
1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 7.026] (II) modeset(0): Modeline "1280x720"x120.0 120.75 =
1280 1304 1320
1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 7.026] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1=
280 1344 1472
1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 7.026] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1=
280 1328 1360
1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 7.026] (II) modeset(0): Modeline "1024x768"x120.1 133.47 =
1024 1100 1212
1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 7.026] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1=
024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 7.026] (II) modeset(0): Modeline "960x720"x120.0 117.00 9=
60 1024 1128
1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 7.026] (II) modeset(0): Modeline "928x696"x120.1 109.15 9=
28 976 1088
1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 7.026] (II) modeset(0): Modeline "896x672"x120.0 102.40 8=
96 960 1060
1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 7.026] (II) modeset(0): Modeline "1024x576"x119.9 98.50 =
1024 1092 1200
1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 7.026] (II) modeset(0): Modeline "1024x576"x119.9 78.38 =
1024 1048 1064
1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 7.026] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1=
024 1064 1160
1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 7.026] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1=
024 1072 1104
1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 7.026] (II) modeset(0): Modeline "960x600"x119.9 96.62 9=
60 1028 1128
1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 7.026] (II) modeset(0): Modeline "960x600"x120.0 77.00 9=
60 984 1000
1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 7.026] (II) modeset(0): Modeline "960x540"x119.9 86.50 9=
60 1024 1124
1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 7.026] (II) modeset(0): Modeline "960x540"x120.0 69.25 9=
60 984 1000
1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 7.026] (II) modeset(0): Modeline "960x540"x59.6 40.75 96=
0 992 1088
1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 7.026] (II) modeset(0): Modeline "960x540"x59.8 37.25 96=
0 1008 1040
1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 7.026] (II) modeset(0): Modeline "800x600"x120.0 81.00 8=
00 832 928
1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 7.026] (II) modeset(0): Modeline "800x600"x60.3 40.00 80=
0 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 7.026] (II) modeset(0): Modeline "800x600"x56.2 36.00 80=
0 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 7.026] (II) modeset(0): Modeline "840x525"x120.0 73.12 8=
40 892 980
1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 7.026] (II) modeset(0): Modeline "840x525"x119.8 59.50 8=
40 864 880 920
525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 7.026] (II) modeset(0): Modeline "864x486"x59.9 32.50 86=
4 888 968 1072
486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 7.026] (II) modeset(0): Modeline "864x486"x59.6 30.50 86=
4 912 944 1024
486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 7.026] (II) modeset(0): Modeline "700x525"x120.0 61.00 7=
00 744 820 940
525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 7.026] (II) modeset(0): Modeline "800x450"x119.9 59.12 8=
00 848 928
1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 7.026] (II) modeset(0): Modeline "800x450"x119.6 48.75 8=
00 824 840 880
450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 7.026] (II) modeset(0): Modeline "640x512"x120.0 54.00 6=
40 664 720 844
512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 7.026] (II) modeset(0): Modeline "700x450"x119.9 51.75 7=
00 740 812 924
450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 7.026] (II) modeset(0): Modeline "700x450"x119.8 43.25 7=
00 724 740 780
450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 7.026] (II) modeset(0): Modeline "640x480"x120.0 54.00 6=
40 688 744 900
480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 7.026] (II) modeset(0): Modeline "640x480"x59.9 25.18 64=
0 656 752 800=20
480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 7.026] (II) modeset(0): Modeline "720x405"x59.5 22.50 72=
0 744 808 896=20
405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 7.026] (II) modeset(0): Modeline "720x405"x59.0 21.75 72=
0 768 800 880=20
405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 7.026] (II) modeset(0): Modeline "684x384"x119.8 42.62 6=
84 720 788 892
384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 7.026] (II) modeset(0): Modeline "684x384"x119.7 36.12 6=
84 708 724 764
384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 7.026] (II) modeset(0): Modeline "640x400"x119.8 41.75 6=
40 676 740 840
400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 7.026] (II) modeset(0): Modeline "640x400"x120.0 35.50 6=
40 664 680 720
400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 7.026] (II) modeset(0): Modeline "640x360"x119.7 37.25 6=
40 672 736 832
360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 7.026] (II) modeset(0): Modeline "640x360"x119.7 31.88 6=
40 664 680 720
360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 7.026] (II) modeset(0): Modeline "640x360"x59.8 18.00 64=
0 664 720 800=20
360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 7.026] (II) modeset(0): Modeline "640x360"x59.3 17.75 64=
0 688 720 800=20
360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 7.026] (II) modeset(0): Modeline "512x384"x120.0 32.50 5=
12 524 592 672
384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 7.026] (II) modeset(0): Modeline "512x288"x120.0 23.25 5=
12 532 580 648
288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 7.026] (II) modeset(0): Modeline "512x288"x119.8 21.00 5=
12 536 552 592
288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 7.026] (II) modeset(0): Modeline "480x270"x119.3 20.38 4=
80 496 544 608
270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 7.027] (II) modeset(0): Modeline "480x270"x119.6 18.62 4=
80 504 520 560
270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 7.027] (II) modeset(0): Modeline "400x300"x120.6 20.00 4=
00 420 484 528
300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 7.027] (II) modeset(0): Modeline "400x300"x112.7 18.00 4=
00 412 448 512
300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 7.027] (II) modeset(0): Modeline "432x243"x119.8 16.25 4=
32 444 484 536
243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 7.027] (II) modeset(0): Modeline "432x243"x119.1 15.25 4=
32 456 472 512
243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 7.027] (II) modeset(0): Modeline "320x240"x120.1 12.59 3=
20 328 376 400
240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 7.027] (II) modeset(0): Modeline "360x202"x119.0 11.25 3=
60 372 404 448
202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 7.027] (II) modeset(0): Modeline "360x202"x118.3 10.88 3=
60 384 400 440
202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 7.027] (II) modeset(0): Modeline "320x180"x119.7 9.00 3=
20 332 360 400
180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 7.027] (II) modeset(0): Modeline "320x180"x118.6 8.88 3=
20 344 360 400
180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 7.027] (II) modeset(0): EDID for output DP-1
[ 7.030] (II) modeset(0): EDID for output HDMI-1
[ 7.030] (II) modeset(0): EDID for output DP-2
[ 7.034] (II) modeset(0): EDID for output HDMI-2
[ 7.034] (II) modeset(0): Output eDP-1 connected
[ 7.034] (II) modeset(0): Output DP-1 disconnected
[ 7.034] (II) modeset(0): Output HDMI-1 disconnected
[ 7.034] (II) modeset(0): Output DP-2 disconnected
[ 7.034] (II) modeset(0): Output HDMI-2 disconnected
[ 7.034] (II) modeset(0): Using exact sizes for initial modes
[ 7.034] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 7.034] (=3D=3D) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 7.034] (=3D=3D) modeset(0): DPI set to (96, 96)
[ 7.034] (II) Loading sub module "fb"
[ 7.034] (II) LoadModule: "fb"
[ 7.034] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.035] (II) Module fb: vendor=3D"X.Org Foundation"
[ 7.035] compiled for 1.19.6, module version =3D 1.0.0
[ 7.035] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.035] (=3D=3D) modeset(G0): Depth 24, (=3D=3D) framebuffer bpp 32
[ 7.035] (=3D=3D) modeset(G0): RGB weight 888
[ 7.035] (=3D=3D) modeset(G0): Default visual is TrueColor
[ 7.035] (II) Loading sub module "glamoregl"
[ 7.035] (II) LoadModule: "glamoregl"
[ 7.035] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 7.035] (II) Module glamoregl: vendor=3D"X.Org Foundation"
[ 7.035] compiled for 1.19.6, module version =3D 1.0.0
[ 7.035] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.035] (II) glamor: OpenGL accelerated X.org driver based.
[ 7.161] (II) glamor: EGL version 1.5 (DRI2):
[ 7.164] (II) modeset(G0): glamor initialized
[ 7.164] (=3D=3D) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 7.164] (=3D=3D) modeset(G0): DPI set to (96, 96)
[ 7.164] (II) Loading sub module "fb"
[ 7.164] (II) LoadModule: "fb"
[ 7.165] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.165] (II) Module fb: vendor=3D"X.Org Foundation"
[ 7.165] compiled for 1.19.6, module version =3D 1.0.0
[ 7.165] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.165] (II) UnloadModule: "intel"
[ 7.165] (II) Unloading intel
[ 7.165] (II) UnloadModule: "amdgpu"
[ 7.165] (II) Unloading amdgpu
[ 7.165] (=3D=3D) Depth 24 pixmap format is 32 bpp
[ 7.169] (=3D=3D) modeset(G0): Backing store enabled
[ 7.169] (=3D=3D) modeset(G0): Silken mouse enabled
[ 7.169] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 7.170] (=3D=3D) modeset(G0): DPMS enabled
[ 7.170] (EE) modeset(G0): [DRI2] No driver mapping found for PCI device
0x1002 / 0x6985
[ 7.170] (EE) modeset(G0): Failed to initialize the DRI2 extension.
[ 7.178] (=3D=3D) modeset(0): Backing store enabled
[ 7.178] (=3D=3D) modeset(0): Silken mouse enabled
[ 7.178] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 7.217] (=3D=3D) modeset(0): DPMS enabled
[ 7.217] (II) modeset(0): [DRI2] Setup complete
[ 7.217] (II) modeset(0): [DRI2] DRI driver: i965
[ 7.217] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 7.217] (--) RandR disabled
[ 7.237] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 7.237] (II) AIGLX: enabled GLX_ARB_create_context
[ 7.237] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 7.237] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 7.237] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 7.237] (II) AIGLX: enabled GLX_SGI_swap_control
[ 7.237] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 7.237] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 7.237] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 7.237] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objec=
ts
[ 7.237] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 7.237] (II) AIGLX: Loaded and initialized i965
[ 7.237] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 7.240] (II) modeset(G0): Damage tracking initialized
[ 7.246] (II) modeset(0): Damage tracking initialized
[ 7.246] (II) modeset(0): Setting screen physical size to 508 x 285
[ 7.333] (II) config/udev: Adding input device Power Button
(/dev/input/event2)
[ 7.333] (**) Power Button: Applying InputClass "evdev keyboard ca=
tchall"
[ 7.333] (**) Power Button: Applying InputClass "libinput keyboard
catchall"
[ 7.334] (**) Power Button: Applying InputClass "system-keyboard&q=
uot;
[ 7.334] (II) LoadModule: "libinput"
[ 7.334] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 7.338] (II) Module libinput: vendor=3D"X.Org Foundation"
[ 7.338] compiled for 1.19.6, module version =3D 0.27.1
[ 7.338] Module class: X.Org XInput Driver
[ 7.338] ABI class: X.Org XInput driver, version 24.1
[ 7.338] (II) Using input driver 'libinput' for 'Power Button'
[ 7.338] (**) Power Button: always reports core events
[ 7.338] (**) Option "Device" "/dev/input/event2"
[ 7.338] (**) Option "_source" "server/udev"
[ 7.339] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 7.339] (II) event2 - Power Button: device is a keyboard
[ 7.339] (II) event2 - Power Button: device removed
[ 7.361] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 7.361] (II) XINPUT: Adding extended input device "Power Button&q=
uot; (type:
KEYBOARD, id 6)
[ 7.361] (**) Option "xkb_model" "pc105"
[ 7.361] (**) Option "xkb_layout" "es"
[ 7.405] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 7.405] (II) event2 - Power Button: device is a keyboard
[ 7.406] (II) config/udev: Adding input device Video Bus
(/dev/input/event8)
[ 7.406] (**) Video Bus: Applying InputClass "evdev keyboard catch=
all"
[ 7.406] (**) Video Bus: Applying InputClass "libinput keyboard ca=
tchall"
[ 7.406] (**) Video Bus: Applying InputClass "system-keyboard"
[ 7.406] (II) Using input driver 'libinput' for 'Video Bus'
[ 7.406] (**) Video Bus: always reports core events
[ 7.406] (**) Option "Device" "/dev/input/event8"
[ 7.406] (**) Option "_source" "server/udev"
[ 7.407] (II) event8 - Video Bus: is tagged by udev as: Keyboard
[ 7.407] (II) event8 - Video Bus: device is a keyboard
[ 7.407] (II) event8 - Video Bus: device removed
[ 7.440] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/inpu=
t/input21/event8"
[ 7.440] (II) XINPUT: Adding extended input device "Video Bus"=
; (type:
KEYBOARD, id 7)
[ 7.440] (**) Option "xkb_model" "pc105"
[ 7.440] (**) Option "xkb_layout" "es"
[ 7.442] (II) event8 - Video Bus: is tagged by udev as: Keyboard
[ 7.442] (II) event8 - Video Bus: device is a keyboard
[ 7.443] (II) config/udev: Adding input device Lid Switch
(/dev/input/event1)
[ 7.443] (II) No input driver specified, ignoring this device.
[ 7.443] (II) This device may have been added with another device file.
[ 7.444] (II) config/udev: Adding input device Sleep Button
(/dev/input/event0)
[ 7.444] (**) Sleep Button: Applying InputClass "evdev keyboard ca=
tchall"
[ 7.444] (**) Sleep Button: Applying InputClass "libinput keyboard
catchall"
[ 7.444] (**) Sleep Button: Applying InputClass "system-keyboard&q=
uot;
[ 7.444] (II) Using input driver 'libinput' for 'Sleep Button'
[ 7.444] (**) Sleep Button: always reports core events
[ 7.444] (**) Option "Device" "/dev/input/event0"
[ 7.444] (**) Option "_source" "server/udev"
[ 7.445] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 7.445] (II) event0 - Sleep Button: device is a keyboard
[ 7.445] (II) event0 - Sleep Button: device removed
[ 7.480] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/eve=
nt0"
[ 7.480] (II) XINPUT: Adding extended input device "Sleep Button&q=
uot; (type:
KEYBOARD, id 8)
[ 7.480] (**) Option "xkb_model" "pc105"
[ 7.480] (**) Option "xkb_layout" "es"
[ 7.482] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 7.482] (II) event0 - Sleep Button: device is a keyboard
[ 7.484] (II) config/udev: Adding input device Compx 2.4G Receiver
(/dev/input/event17)
[ 7.484] (**) Compx 2.4G Receiver: Applying InputClass "evdev keyb=
oard
catchall"
[ 7.484] (**) Compx 2.4G Receiver: Applying InputClass "libinput k=
eyboard
catchall"
[ 7.484] (**) Compx 2.4G Receiver: Applying InputClass "system-key=
board"
[ 7.484] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver'
[ 7.484] (**) Compx 2.4G Receiver: always reports core events
[ 7.484] (**) Option "Device" "/dev/input/event17"
[ 7.484] (**) Option "_source" "server/udev"
[ 7.485] (II) event17 - Compx 2.4G Receiver: is tagged by udev as: Keyb=
oard
[ 7.485] (II) event17 - Compx 2.4G Receiver: device is a keyboard
[ 7.485] (II) event17 - Compx 2.4G Receiver: device removed
[ 7.520] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:25A7:=
FA61.0002/input/input30/event17"
[ 7.520] (II) XINPUT: Adding extended input device "Compx 2.4G Rec=
eiver"
(type: KEYBOARD, id 9)
[ 7.520] (**) Option "xkb_model" "pc105"
[ 7.520] (**) Option "xkb_layout" "es"
[ 7.522] (II) event17 - Compx 2.4G Receiver: is tagged by udev as: Keyb=
oard
[ 7.522] (II) event17 - Compx 2.4G Receiver: device is a keyboard
[ 7.524] (II) config/udev: Adding input device Compx 2.4G Receiver
(/dev/input/event18)
[ 7.524] (**) Compx 2.4G Receiver: Applying InputClass "evdev poin=
ter
catchall"
[ 7.524] (**) Compx 2.4G Receiver: Applying InputClass "evdev keyb=
oard
catchall"
[ 7.524] (**) Compx 2.4G Receiver: Applying InputClass "libinput p=
ointer
catchall"
[ 7.524] (**) Compx 2.4G Receiver: Applying InputClass "libinput k=
eyboard
catchall"
[ 7.524] (**) Compx 2.4G Receiver: Applying InputClass "system-key=
board"
[ 7.524] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver'
[ 7.524] (**) Compx 2.4G Receiver: always reports core events
[ 7.524] (**) Option "Device" "/dev/input/event18"
[ 7.524] (**) Option "_source" "server/udev"
[ 7.525] (II) event18 - Compx 2.4G Receiver: is tagged by udev as: Keyb=
oard
Mouse
[ 7.525] (II) event18 - Compx 2.4G Receiver: device is a pointer
[ 7.525] (II) event18 - Compx 2.4G Receiver: device is a keyboard
[ 7.525] (II) event18 - Compx 2.4G Receiver: device removed
[ 7.560] (II) libinput: Compx 2.4G Receiver: needs a virtual subdevice
[ 7.560] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:25A7:=
FA61.0003/input/input31/event18"
[ 7.560] (II) XINPUT: Adding extended input device "Compx 2.4G Rec=
eiver"
(type: MOUSE, id 10)
[ 7.561] (**) Option "AccelerationScheme" "none"
[ 7.561] (**) Compx 2.4G Receiver: (accel) selected scheme none/0
[ 7.561] (**) Compx 2.4G Receiver: (accel) acceleration factor: 2.000
[ 7.561] (**) Compx 2.4G Receiver: (accel) acceleration threshold: 4
[ 7.562] (II) event18 - Compx 2.4G Receiver: is tagged by udev as: Keyb=
oard
Mouse
[ 7.562] (II) event18 - Compx 2.4G Receiver: device is a pointer
[ 7.562] (II) event18 - Compx 2.4G Receiver: device is a keyboard
[ 7.564] (II) config/udev: Adding input device Compx 2.4G Receiver
(/dev/input/mouse1)
[ 7.564] (**) Compx 2.4G Receiver: Applying InputClass "system-key=
board"
[ 7.564] (II) No input driver specified, ignoring this device.
[ 7.564] (II) This device may have been added with another device file.
[ 7.565] (II) config/udev: Adding input device HP HD Camera: HP HD Came=
ra
(/dev/input/event20)
[ 7.565] (**) HP HD Camera: HP HD Camera: Applying InputClass "evd=
ev
keyboard catchall"
[ 7.565] (**) HP HD Camera: HP HD Camera: Applying InputClass "lib=
input
keyboard catchall"
[ 7.565] (**) HP HD Camera: HP HD Camera: Applying InputClass
"system-keyboard"
[ 7.565] (II) Using input driver 'libinput' for 'HP HD Camera: HP HD
Camera'
[ 7.565] (**) HP HD Camera: HP HD Camera: always reports core events
[ 7.565] (**) Option "Device" "/dev/input/event20"
[ 7.565] (**) Option "_source" "server/udev"
[ 7.566] (II) event20 - HP HD Camera: HP HD Camera: is tagged by udev a=
s:
Keyboard
[ 7.566] (II) event20 - HP HD Camera: HP HD Camera: device is a keyboard
[ 7.566] (II) event20 - HP HD Camera: HP HD Camera: device removed
[ 7.640] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/inpu=
t33/event20"
[ 7.640] (II) XINPUT: Adding extended input device "HP HD Camera: =
HP HD
Camera" (type: KEYBOARD, id 11)
[ 7.640] (**) Option "xkb_model" "pc105"
[ 7.640] (**) Option "xkb_layout" "es"
[ 7.641] (II) event20 - HP HD Camera: HP HD Camera: is tagged by udev a=
s:
Keyboard
[ 7.641] (II) event20 - HP HD Camera: HP HD Camera: device is a keyboard
[ 7.643] (II) config/udev: Adding input device HP HD Camera: HP IR Came=
ra
(/dev/input/event21)
[ 7.643] (**) HP HD Camera: HP IR Camera: Applying InputClass "evd=
ev
keyboard catchall"
[ 7.643] (**) HP HD Camera: HP IR Camera: Applying InputClass "lib=
input
keyboard catchall"
[ 7.643] (**) HP HD Camera: HP IR Camera: Applying InputClass
"system-keyboard"
[ 7.643] (II) Using input driver 'libinput' for 'HP HD Camera: HP IR
Camera'
[ 7.643] (**) HP HD Camera: HP IR Camera: always reports core events
[ 7.643] (**) Option "Device" "/dev/input/event21"
[ 7.643] (**) Option "_source" "server/udev"
[ 7.644] (II) event21 - HP HD Camera: HP IR Camera: is tagged by udev a=
s:
Keyboard
[ 7.644] (II) event21 - HP HD Camera: HP IR Camera: device is a keyboard
[ 7.644] (II) event21 - HP HD Camera: HP IR Camera: device removed
[ 7.706] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.2/input/inpu=
t34/event21"
[ 7.706] (II) XINPUT: Adding extended input device "HP HD Camera: =
HP IR
Camera" (type: KEYBOARD, id 12)
[ 7.706] (**) Option "xkb_model" "pc105"
[ 7.706] (**) Option "xkb_layout" "es"
[ 7.708] (II) event21 - HP HD Camera: HP IR Camera: is tagged by udev a=
s:
Keyboard
[ 7.708] (II) event21 - HP HD Camera: HP IR Camera: device is a keyboard
[ 7.709] (II) config/udev: Adding input device SYNA3071:00 06CB:82F1
Touchpad (/dev/input/event7)
[ 7.709] (**) SYNA3071:00 06CB:82F1 Touchpad: Applying InputClass "=
;evdev
touchpad catchall"
[ 7.709] (**) SYNA3071:00 06CB:82F1 Touchpad: Applying InputClass "=
;libinput
touchpad catchall"
[ 7.709] (II) Using input driver 'libinput' for 'SYNA3071:00 06CB:82F1
Touchpad'
[ 7.709] (**) SYNA3071:00 06CB:82F1 Touchpad: always reports core events
[ 7.709] (**) Option "Device" "/dev/input/event7"
[ 7.709] (**) Option "_source" "server/udev"
[ 7.818] (II) event7 - SYNA3071:00 06CB:82F1 Touchpad: is tagged by ud=
ev
as: Touchpad
[ 7.818] (II) event7 - SYNA3071:00 06CB:82F1 Touchpad: device is a
touchpad
[ 7.818] (II) event7 - SYNA3071:00 06CB:82F1 Touchpad: device removed
[ 7.880] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-=
SYNA3071:00/0018:06CB:82F1.0001/input/input15/event7"
[ 7.880] (II) XINPUT: Adding extended input device "SYNA3071:00 06=
CB:82F1
Touchpad" (type: TOUCHPAD, id 13)
[ 7.880] (**) Option "AccelerationScheme" "none"
[ 7.880] (**) SYNA3071:00 06CB:82F1 Touchpad: (accel) selected scheme
none/0
[ 7.881] (**) SYNA3071:00 06CB:82F1 Touchpad: (accel) acceleration fact=
or:
2.000
[ 7.881] (**) SYNA3071:00 06CB:82F1 Touchpad: (accel) acceleration
threshold: 4
[ 7.882] (II) event7 - SYNA3071:00 06CB:82F1 Touchpad: is tagged by ud=
ev
as: Touchpad
[ 7.882] (II) event7 - SYNA3071:00 06CB:82F1 Touchpad: device is a
touchpad
[ 7.884] (II) config/udev: Adding input device SYNA3071:00 06CB:82F1
Touchpad (/dev/input/mouse0)
[ 7.884] (II) No input driver specified, ignoring this device.
[ 7.884] (II) This device may have been added with another device file.
[ 7.885] (II) config/udev: Adding input device HDA Digital PCBeep
(/dev/input/event9)
[ 7.885] (II) No input driver specified, ignoring this device.
[ 7.885] (II) This device may have been added with another device file.
[ 7.886] (II) config/udev: Adding input device HDA Intel PCH Mic
(/dev/input/event10)
[ 7.886] (II) No input driver specified, ignoring this device.
[ 7.886] (II) This device may have been added with another device file.
[ 7.887] (II) config/udev: Adding input device HDA Intel PCH Headphone
(/dev/input/event11)
[ 7.887] (II) No input driver specified, ignoring this device.
[ 7.887] (II) This device may have been added with another device file.
[ 7.887] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pc=
m=3D3
(/dev/input/event12)
[ 7.887] (II) No input driver specified, ignoring this device.
[ 7.888] (II) This device may have been added with another device file.
[ 7.888] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pc=
m=3D7
(/dev/input/event13)
[ 7.888] (II) No input driver specified, ignoring this device.
[ 7.888] (II) This device may have been added with another device file.
[ 7.889] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pc=
m=3D8
(/dev/input/event14)
[ 7.889] (II) No input driver specified, ignoring this device.
[ 7.889] (II) This device may have been added with another device file.
[ 7.890] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pc=
m=3D9
(/dev/input/event15)
[ 7.890] (II) No input driver specified, ignoring this device.
[ 7.890] (II) This device may have been added with another device file.
[ 7.891] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pc=
m=3D10
(/dev/input/event16)
[ 7.891] (II) No input driver specified, ignoring this device.
[ 7.891] (II) This device may have been added with another device file.
[ 7.892] (II) config/udev: Adding input device AT Translated Set 2 keyb=
oard
(/dev/input/event3)
[ 7.892] (**) AT Translated Set 2 keyboard: Applying InputClass "e=
vdev
keyboard catchall"
[ 7.892] (**) AT Translated Set 2 keyboard: Applying InputClass "l=
ibinput
keyboard catchall"
[ 7.892] (**) AT Translated Set 2 keyboard: Applying InputClass
"system-keyboard"
[ 7.892] (II) Using input driver 'libinput' for 'AT Translated Set 2
keyboard'
[ 7.892] (**) AT Translated Set 2 keyboard: always reports core events
[ 7.892] (**) Option "Device" "/dev/input/event3"
[ 7.892] (**) Option "_source" "server/udev"
[ 7.893] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev=
as:
Keyboard
[ 7.893] (II) event3 - AT Translated Set 2 keyboard: device is a keybo=
ard
[ 7.893] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 7.920] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 7.920] (II) XINPUT: Adding extended input device "AT Translated =
Set 2
keyboard" (type: KEYBOARD, id 14)
[ 7.920] (**) Option "xkb_model" "pc105"
[ 7.920] (**) Option "xkb_layout" "es"
[ 7.922] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev=
as:
Keyboard
[ 7.922] (II) event3 - AT Translated Set 2 keyboard: device is a keybo=
ard
[ 7.923] (II) config/udev: Adding input device PS/2 Generic Mouse
(/dev/input/event19)
[ 7.923] (**) PS/2 Generic Mouse: Applying InputClass "evdev point=
er
catchall"
[ 7.923] (**) PS/2 Generic Mouse: Applying InputClass "libinput po=
inter
catchall"
[ 7.923] (II) Using input driver 'libinput' for 'PS/2 Generic Mouse'
[ 7.923] (**) PS/2 Generic Mouse: always reports core events
[ 7.923] (**) Option "Device" "/dev/input/event19"
[ 7.923] (**) Option "_source" "server/udev"
[ 7.924] (II) event19 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[ 7.924] (II) event19 - PS/2 Generic Mouse: device is a pointer
[ 7.924] (II) event19 - PS/2 Generic Mouse: device removed
[ 8.027] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio2/input/input11/event19"
[ 8.027] (II) XINPUT: Adding extended input device "PS/2 Generic M=
ouse"
(type: MOUSE, id 15)
[ 8.027] (**) Option "AccelerationScheme" "none"
[ 8.027] (**) PS/2 Generic Mouse: (accel) selected scheme none/0
[ 8.027] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 8.027] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 8.028] (II) event19 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[ 8.028] (II) event19 - PS/2 Generic Mouse: device is a pointer
[ 8.029] (II) config/udev: Adding input device PS/2 Generic Mouse
(/dev/input/mouse2)
[ 8.029] (II) No input driver specified, ignoring this device.
[ 8.029] (II) This device may have been added with another device file.
[ 8.030] (II) config/udev: Adding input device SynPS/2 Synaptics TouchP=
ad
(/dev/input/event22)
[ 8.030] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evd=
ev
touchpad catchall"
[ 8.030] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "lib=
input
touchpad catchall"
[ 8.030] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics
TouchPad'
[ 8.030] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 8.030] (**) Option "Device" "/dev/input/event22"
[ 8.030] (**) Option "_source" "server/udev"
[ 8.031] (II) event22 - SynPS/2 Synaptics TouchPad: is tagged by udev a=
s:
Touchpad
[ 8.031] (II) event22 - SynPS/2 Synaptics TouchPad: no resolution or si=
ze
hints, assuming a size of 69x50mm
[ 8.031] (II) event22 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 8.031] (II) event22 - SynPS/2 Synaptics TouchPad: device removed
[ 8.107] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio3/input/input32/event22"
[ 8.107] (II) XINPUT: Adding extended input device "SynPS/2 Synapt=
ics
TouchPad" (type: TOUCHPAD, id 16)
[ 8.107] (**) Option "AccelerationScheme" "none"
[ 8.107] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 8.107] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor:
2.000
[ 8.107] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshol=
d: 4
[ 8.108] (II) event22 - SynPS/2 Synaptics TouchPad: is tagged by udev a=
s:
Touchpad
[ 8.108] (II) event22 - SynPS/2 Synaptics TouchPad: no resolution or si=
ze
hints, assuming a size of 69x50mm
[ 8.108] (II) event22 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 8.109] (II) config/udev: Adding input device SynPS/2 Synaptics TouchP=
ad
(/dev/input/mouse3)
[ 8.109] (II) No input driver specified, ignoring this device.
[ 8.109] (II) This device may have been added with another device file.
[ 8.110] (II) config/udev: Adding input device PC Speaker
(/dev/input/event5)
[ 8.110] (II) No input driver specified, ignoring this device.
[ 8.110] (II) This device may have been added with another device file.
[ 8.112] (II) config/udev: Adding input device HP WMI hotkeys
(/dev/input/event6)
[ 8.112] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard =
catchall"
[ 8.112] (**) HP WMI hotkeys: Applying InputClass "libinput keyboa=
rd
catchall"
[ 8.112] (**) HP WMI hotkeys: Applying InputClass "system-keyboard=
"
[ 8.112] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[ 8.112] (**) HP WMI hotkeys: always reports core events
[ 8.112] (**) Option "Device" "/dev/input/event6"
[ 8.112] (**) Option "_source" "server/udev"
[ 8.113] (II) event6 - HP WMI hotkeys: is tagged by udev as: Keyboard
Switch
[ 8.113] (II) event6 - HP WMI hotkeys: device is a keyboard
[ 8.113] (II) event6 - HP WMI hotkeys: device removed
[ 8.147] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input12/event6"
[ 8.147] (II) XINPUT: Adding extended input device "HP WMI hotkeys=
" (type:
KEYBOARD, id 17)
[ 8.147] (**) Option "xkb_model" "pc105"
[ 8.147] (**) Option "xkb_layout" "es"
[ 8.148] (II) event6 - HP WMI hotkeys: is tagged by udev as: Keyboard
Switch
[ 8.148] (II) event6 - HP WMI hotkeys: device is a keyboard
[ 8.149] (II) config/udev: Adding input device HP Wireless hotkeys
(/dev/input/event4)
[ 8.149] (**) HP Wireless hotkeys: Applying InputClass "evdev keyb=
oard
catchall"
[ 8.149] (**) HP Wireless hotkeys: Applying InputClass "libinput k=
eyboard
catchall"
[ 8.149] (**) HP Wireless hotkeys: Applying InputClass "system-key=
board"
[ 8.149] (II) Using input driver 'libinput' for 'HP Wireless hotkeys'
[ 8.149] (**) HP Wireless hotkeys: always reports core events
[ 8.149] (**) Option "Device" "/dev/input/event4"
[ 8.149] (**) Option "_source" "server/udev"
[ 8.150] (II) event4 - HP Wireless hotkeys: is tagged by udev as: Keyb=
oard
[ 8.150] (II) event4 - HP Wireless hotkeys: device is a keyboard
[ 8.150] (II) event4 - HP Wireless hotkeys: device removed
[ 8.213] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input8/event4"
[ 8.213] (II) XINPUT: Adding extended input device "HP Wireless ho=
tkeys"
(type: KEYBOARD, id 18)
[ 8.213] (**) Option "xkb_model" "pc105"
[ 8.213] (**) Option "xkb_layout" "es"
[ 8.215] (II) event4 - HP Wireless hotkeys: is tagged by udev as: Keyb=
oard
[ 8.215] (II) event4 - HP Wireless hotkeys: device is a keyboard
[ 8.233] (**) Compx 2.4G Receiver: Applying InputClass "evdev poin=
ter
catchall"
[ 8.233] (**) Compx 2.4G Receiver: Applying InputClass "evdev keyb=
oard
catchall"
[ 8.233] (**) Compx 2.4G Receiver: Applying InputClass "libinput p=
ointer
catchall"
[ 8.233] (**) Compx 2.4G Receiver: Applying InputClass "libinput k=
eyboard
catchall"
[ 8.233] (**) Compx 2.4G Receiver: Applying InputClass "system-key=
board"
[ 8.233] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver'
[ 8.233] (**) Compx 2.4G Receiver: always reports core events
[ 8.233] (**) Option "Device" "/dev/input/event18"
[ 8.233] (**) Option "_source" "_driver/libinput"
[ 8.233] (II) libinput: Compx 2.4G Receiver: is a virtual subdevice
[ 8.233] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:25A7:=
FA61.0003/input/input31/event18"
[ 8.233] (II) XINPUT: Adding extended input device "Compx 2.4G Rec=
eiver"
(type: KEYBOARD, id 19)
[ 8.233] (**) Option "xkb_model" "pc105"
[ 8.233] (**) Option "xkb_layout" "es"
[ 13.833] (II) modeset(0): EDID vendor "LGD", prod id 1433
[ 13.833] (II) modeset(0): Printing DDC gathered Modelines:
[ 13.833] (II) modeset(0): Modeline "1920x1080"x0.0 138.70 1=
920 1968 2000
2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 13.833] (II) modeset(0): Modeline "1920x1080"x0.0 92.43 1=
920 1968 2000
2080 1080 1083 1088 1111 -hsync -vsync (44.4 kHz e)
[ 14.298] (II) modeset(0): EDID vendor "LGD", prod id 1433
[ 14.298] (II) modeset(0): Printing DDC gathered Modelines:
[ 14.298] (II) modeset(0): Modeline "1920x1080"x0.0 138.70 1=
920 1968 2000
2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 14.298] (II) modeset(0): Modeline "1920x1080"x0.0 92.43 1=
920 1968 2000
2080 1080 1083 1088 1111 -hsync -vsync (44.4 kHz e)