All of lore.kernel.org
 help / color / mirror / Atom feed
From: bugzilla-daemon@bugzilla.kernel.org
To: dri-devel@lists.freedesktop.org
Subject: [Bug 106901] Brightness / WIFI Key does not generate any events
Date: Fri, 15 Jan 2016 13:13:51 +0000	[thread overview]
Message-ID: <bug-106901-2300-Lqp06BhzG1@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-106901-2300@https.bugzilla.kernel.org/>

https://bugzilla.kernel.org/show_bug.cgi?id=106901

--- Comment #26 from Roman Gruber <roman.gruber@gmx.at> ---
uname -a; echo " ";dmesg |grep ACPI
Linux ASUS-G75VW 4.4.0-gentoo_14-01-2016 #1 SMP Thu Jan 14 19:15:47 CET 2016
x86_64 Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz GenuineIntel GNU/Linux

[    0.000000] BIOS-e820: [mem 0x00000000dd6ab000-0x00000000ddcabfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000de586000-0x00000000de805fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000de806000-0x00000000de80afff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000de80c000-0x00000000de84efff] ACPI NVS
[    0.000000] efi:  ACPI=0xde7de000  ACPI 2.0=0xde7de000  SMBIOS=0xde084398 
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000DE7DE000 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x00000000DE7DE080 000084 (v01 _ASUS_ Notebook
01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DE7EE9B8 00010C (v05 _ASUS_ Notebook
01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DE7DE190 010828 (v02 _ASUS_ Notebook
00000013 INTL 20091112)
[    0.000000] ACPI: FACS 0x00000000DE803080 000040
[    0.000000] ACPI: APIC 0x00000000DE7EEAC8 000092 (v03 _ASUS_ Notebook
01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DE7EEB60 000044 (v01 _ASUS_ Notebook
01072009 AMI  00010013)
[    0.000000] ACPI: ECDT 0x00000000DE7EEBA8 0000C1 (v01 _ASUS_ Notebook
01072009 AMI. 00000005)
[    0.000000] ACPI: MCFG 0x00000000DE7EEC70 00003C (v01 _ASUS_ Notebook
01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DE7EECB0 000038 (v01 _ASUS_ Notebook
01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DE7EECE8 00066E (v01 AhciR1 AhciTab1
00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000DE7EF358 00049E (v01 AhciR2 AhciTab2
00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000DE7EF7F8 00090A (v01 PmRef  Cpu0Ist 
00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DE7F0108 000A92 (v01 PmRef  CpuPm   
00003000 INTL 20051117)
[    0.000000] ACPI: BGRT 0x00000000DE7F0BA0 000038 (v00 _ASUS_ Notebook
01072009 ASUS 00010013)
[    0.000000] ACPI: MSDM 0x00000000DE585E18 000055 (v03 _ASUS_ Notebook
00000000 ASUS 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000031] ACPI: Core revision 20150930
[    0.018220] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.158269] PM: Registering ACPI NVS region [mem 0xdd6ab000-0xddcabfff]
(6295552 bytes)
[    0.158430] PM: Registering ACPI NVS region [mem 0xde586000-0xde805fff]
(2621440 bytes)
[    0.158502] PM: Registering ACPI NVS region [mem 0xde80c000-0xde84efff]
(274432 bytes)
[    0.311679] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[    0.311690] ACPI: bus type PCI registered
[    1.331723] ACPI: Added _OSI(Module Device)
[    1.331734] ACPI: Added _OSI(Processor Device)
[    1.331745] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.331755] ACPI: Added _OSI(Processor Aggregator Device)
[    1.333954] ACPI : EC: EC description table is found, configuring boot EC
[    1.333977] ACPI : EC: EC started
[    1.336121] ACPI: Executed 1 blocks of module-level executable AML code
[    1.341939] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    1.342599] ACPI: Dynamic OEM Table Load:
[    1.342618] ACPI: SSDT 0xFFFF88040E15B000 000853 (v01 PmRef  Cpu0Cst 
00003001 INTL 20051117)
[    1.343557] ACPI: Dynamic OEM Table Load:
[    1.343573] ACPI: SSDT 0xFFFF88040D89E400 000303 (v01 PmRef  ApIst   
00003000 INTL 20051117)
[    1.344377] ACPI: Dynamic OEM Table Load:
[    1.344392] ACPI: SSDT 0xFFFF88041E433E00 000119 (v01 PmRef  ApCst   
00003000 INTL 20051117)
[    1.347118] ACPI: Interpreter enabled
[    1.347136] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S1_] (20150930/hwxface-580)
[    1.347152] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S2_] (20150930/hwxface-580)
[    1.347180] ACPI: (supports S0 S3 S4 S5)
[    1.347190] ACPI: Using IOAPIC for interrupt routing
[    1.347238] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[    1.357145] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    1.358371] pci 0000:00:01.0: System wakeup disabled by ACPI
[    1.358626] pci 0000:00:14.0: System wakeup disabled by ACPI
[    1.359092] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    1.359322] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    1.359539] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    1.359956] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    1.360202] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.361589] pci 0000:03:00.0: System wakeup disabled by ACPI
[    1.361966] pci 0000:04:00.0: System wakeup disabled by ACPI
[    1.362801] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0,
disabled.
[    1.362900] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0,
disabled.
[    1.362996] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0,
disabled.
[    1.363090] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0,
disabled.
[    1.363183] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0,
disabled.
[    1.363278] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0,
disabled.
[    1.363370] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0,
disabled.
[    1.363463] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0,
disabled.
[    1.363681] ACPI: Enabled 3 GPEs in block 00 to 3F
[    1.363773] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    1.364150] ACPI: bus type USB registered
[    1.364737] PCI: Using ACPI for IRQ routing
[    1.371343] pnp: PnP ACPI init
[    1.371478] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.371739] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.371775] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.371862] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02
(active)
[    1.371946] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.372033] pnp 00:05: Plug and Play ACPI device, IDs SYN0a19 SYN0a00
SYN0002 PNP0f13 (active)
[    1.372088] pnp 00:06: Plug and Play ACPI device, IDs ATK3001 PNP030b
(active)
[    1.372453] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.372659] pnp: PnP ACPI: found 8 devices
[    2.121700] ACPI: AC Adapter [AC0] (on-line)
[    2.123472] ACPI: Lid Switch [LID]
[    2.126242] ACPI: Sleep Button [SLPB]
[    2.129171] ACPI: Power Button [PWRF]
[    2.130920] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[    2.624774] ACPI: Thermal Zone [THRM] (41 C)
[    2.637846] ACPI: Battery Slot [BAT0] (battery present)
[    2.643427] ACPI Warning: SystemIO range
0x0000000000000428-0x000000000000042F conflicts with OpRegion
0x0000000000000400-0x000000000000044F (\GPIS) (20150930/utaddress-254)
[    2.644992] ACPI Warning: SystemIO range
0x0000000000000428-0x000000000000042F conflicts with OpRegion
0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[    2.646543] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[    2.648102] ACPI Warning: SystemIO range
0x0000000000000540-0x000000000000054F conflicts with OpRegion
0x0000000000000500-0x000000000000057F (\GPIO) (20150930/utaddress-254)
[    2.649760] ACPI Warning: SystemIO range
0x0000000000000540-0x000000000000054F conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GP01) (20150930/utaddress-254)
[    2.651369] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[    2.652982] ACPI Warning: SystemIO range
0x0000000000000530-0x000000000000053F conflicts with OpRegion
0x0000000000000500-0x000000000000057F (\GPIO) (20150930/utaddress-254)
[    2.654663] ACPI Warning: SystemIO range
0x0000000000000530-0x000000000000053F conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GP01) (20150930/utaddress-254)
[    2.656323] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[    2.657987] ACPI Warning: SystemIO range
0x0000000000000500-0x000000000000052F conflicts with OpRegion
0x0000000000000500-0x000000000000057F (\GPIO) (20150930/utaddress-254)
[    2.659737] ACPI Warning: SystemIO range
0x0000000000000500-0x000000000000052F conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GP01) (20150930/utaddress-254)
[    2.661451] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[    2.818844] ACPI Warning: SystemIO range
0x000000000000F000-0x000000000000F01F conflicts with OpRegion
0x000000000000F000-0x000000000000F00F (\SMB0) (20150930/utaddress-254)
[    2.820497] ACPI Warning: SystemIO range
0x000000000000F000-0x000000000000F01F conflicts with OpRegion
0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI)
(20150930/utaddress-254)
[    2.822123] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[    3.090325] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[    3.090357] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    3.090359] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[    3.091893] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[    3.092032] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    3.092034] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[    3.092060] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    3.092062] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[    3.094891] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    3.094893] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[    3.095557] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[    3.095601] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    3.095603] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[    3.108406] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[    3.108448] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    3.108450] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[   12.606217] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   12.606268] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   12.606300] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   12.606330] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   12.606375] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   12.606405] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   12.606435] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   12.606468] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   12.606539] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   12.938291] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   20.079333] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   20.079387] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   20.079420] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   20.079451] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   20.079496] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   20.079526] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   20.079557] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   20.079590] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   20.079661] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   20.184604] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)

-- 
You are receiving this mail because:
You are watching the assignee of the bug.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2016-01-15 13:13 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <bug-106901-2300@https.bugzilla.kernel.org/>
2015-11-05  6:46 ` [Bug 106901] Brightness / WIFI Key does not generate any events bugzilla-daemon
2015-11-20 11:18 ` bugzilla-daemon
2015-11-20 11:19 ` bugzilla-daemon
2015-11-20 11:20 ` bugzilla-daemon
2015-12-13 18:27 ` bugzilla-daemon
2015-12-13 18:27 ` bugzilla-daemon
2015-12-13 18:37 ` bugzilla-daemon
2015-12-13 18:55 ` bugzilla-daemon
2015-12-17 16:02 ` bugzilla-daemon
2015-12-17 16:04 ` bugzilla-daemon
2015-12-17 16:06 ` bugzilla-daemon
2015-12-17 16:07 ` bugzilla-daemon
2015-12-17 16:08 ` bugzilla-daemon
2015-12-17 16:11 ` bugzilla-daemon
2016-01-15 13:13 ` bugzilla-daemon [this message]
2016-01-15 13:14 ` bugzilla-daemon
2016-01-15 13:14 ` bugzilla-daemon
2016-01-15 13:15 ` bugzilla-daemon
2016-03-09 13:05 ` bugzilla-daemon
2016-03-09 13:05 ` bugzilla-daemon
2016-03-21 10:44 ` bugzilla-daemon
2016-03-21 10:45 ` bugzilla-daemon
2016-03-21 10:45 ` bugzilla-daemon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bug-106901-2300-Lqp06BhzG1@https.bugzilla.kernel.org/ \
    --to=bugzilla-daemon@bugzilla.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.