[Bug 110865] Rx480 consumes 20w more power in idle than under Windows - bugzilla-daemon

From: bugzilla-daemon@freedesktop.org
To: dri-devel@lists.freedesktop.org
Subject: [Bug 110865] Rx480 consumes 20w more power in idle than under Windows
Date: Sun, 09 Jun 2019 13:22:01 +0000	[thread overview]
Message-ID: <bug-110865-502@http.bugs.freedesktop.org/> (raw)

[-- Attachment #1.1: Type: text/plain, Size: 2046 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=110865

            Bug ID: 110865
           Summary: Rx480 consumes 20w more power in idle than under
                    Windows
           Product: Mesa
           Version: 19.1
          Hardware: Other
                OS: All
            Status: NEW
          Severity: normal
          Priority: medium
         Component: Drivers/Gallium/radeonsi
          Assignee: dri-devel@lists.freedesktop.org
          Reporter: mwolf@adiumentum.com
        QA Contact: dri-devel@lists.freedesktop.org

Created attachment 144485
  --> https://bugs.freedesktop.org/attachment.cgi?id=144485&action=edit
logfiles as requested in the amd bugreport guide

First I am not sure where to file that bug, so please be gentle with me, if I
selected the wrong component.

I noticed for a while higher temperatures of my Videocard when my pc was just
idling with gnome. Then I dug deeper and found out that my "zero fan" videocard
does not stop the fan when I run Linux.

So I ran this line here:
watch -n 0.5 cat /sys/kernel/debug/dri/0/amdgpu_pm_info
and it showed me that the MCLK does not clock down to 300MHz as it does with
Windows 10. 
GFX Clocks and Power:
        2000 MHz (MCLK)
        300 MHz (SCLK)
        300 MHz (PSTATE_SCLK)
        300 MHz (PSTATE_MCLK)
        1000 mV (VDDGFX)
        24.75 W (average GPU)

GPU Temperature: 45 C
GPU Load: 0 %

I have a multimonitor setup with two 1920x1200 pixel screens. When I use
Windows 10, the MCLK does not go beyond 300MHz when the desktop is idling.
(measured with hwmonitor) 
When I power-off one screen under linux the (average GPU) goes down to 8-10W
and the MCLK drops to 300MHz, so the card can clock down, but is somehow
prohibited by the driver or configuration?

I followed this bug report guide from amd:
https://www.amd.com/en/support/kb/faq/amdgpu-installation#faq-Reporting-Bugs
and attached several logfiles.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 3695 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel