From: bugzilla@dpdk.org
To: dev@dpdk.org
Subject: [Bug 1261] [dpdk 23.07] the dpdk-testpmd (based on VF) 's throughput is 0
Date: Fri, 07 Jul 2023 07:41:56 +0000 [thread overview]
Message-ID: <bug-1261-3@http.bugs.dpdk.org/> (raw)
[-- Attachment #1: Type: text/plain, Size: 6243 bytes --]
https://bugs.dpdk.org/show_bug.cgi?id=1261
Bug ID: 1261
Summary: [dpdk 23.07] the dpdk-testpmd (based on VF) 's
throughput is 0
Product: DPDK
Version: 23.07
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: Normal
Component: testpmd
Assignee: dev@dpdk.org
Reporter: yanghliu@redhat.com
Target Milestone: ---
Description of problem:
start a dpdk-testpmd based on VF , do the Moongen Throughput tests, the
dpdk-testpmd throughput is 0
Version-Release number of selected component (if applicable):
host:
Ethernet Controller 10-Gigabit X540-AT2
5.14 kernel
How reproducible:
100%
Steps to Reproduce:
1. setup the host kernel option
# grubby --args="iommu=pt intel_iommu=on default_hugepagesz=1G"
--update-kernel=`grubby --default-kernel`
# reboot
2. setup hugepage number
# echo 20 >
/sys/devices/system/node/node0/hugepages/hugepages-1048576kB/nr_hugepages
# echo 20 >
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
3. create VF and setup VF mac address
# /usr/sbin/ifconfig ens3f0 up
# echo 2 > /sys/bus/pci/devices/0000\:5e\:00.0/sriov_numvfs
# readlink /sys/bus/pci/devices/0000:5e:00.0/virtfn*
# ip link set enp94s0f0 vf 0 mac 88:66:da:5f:dd:02
# dpdk-devbind.py --bind=vfio-pci 0000:5e:10.0
# /usr/sbin/ifconfig ens3f1 up
# echo 2 > /sys/bus/pci/devices/0000\:5e\:00.1/sriov_numvfs
# readlink /sys/bus/pci/devices/0000:5e:00.1/virtfn*
# ip link set enp94s0f1 vf 0 mac 88:66:da:5f:dd:03
# dpdk-devbind.py --bind=vfio-pci 0000:5e:10.1
4. start a dpdk-testpmd on the host
# /usr/local/bin/dpdk-testpmd -l 2,4,6 -n 4 -- --nb-cores=2 -i --disable-rss
--rxd=512 --txd=512 --rxq=1 --txq=1
EAL: Detected CPU lcores: 64
EAL: Detected NUMA nodes: 2
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'VA'
EAL: VFIO support initialized
EAL: Using IOMMU type 1 (Type 1)
EAL: Probe PCI driver: net_ixgbe_vf (8086:1515) device: 0000:5e:10.0 (socket 0)
EAL: Probe PCI driver: net_ixgbe_vf (8086:1515) device: 0000:5e:10.1 (socket 0)
TELEMETRY: No legacy callbacks, legacy socket not created
Interactive-mode selected
testpmd: create a new mbuf pool <mb_pool_0>: n=163456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 88:66:DA:5F:DD:02
Configuring Port 1 (socket 0)
Port 1: 88:66:DA:5F:DD:03
Checking link statuses...
Done
testpmd> set fwd mac retry
Set mac packet forwarding mode with retry
testpmd> vlan set strip on 0
testpmd> vlan set strip on 1
testpmd> start
mac packet forwarding with retry - ports=2 - cores=2 - streams=2 - NUMA support
enabled, MP allocation mode: native
TX retry num: 64, delay between TX retries: 1us
Logical Core 4 (socket 0) forwards packets on 1 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
Logical Core 6 (socket 0) forwards packets on 1 streams:
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
mac packet forwarding with retry packets/burst=32
nb forwarding cores=2 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0x1 Tx offloads=0x0
RX queue: 0
RX desc=512 - RX free threshold=32
RX threshold registers: pthresh=0 hthresh=0 wthresh=0
RX Offloads=0x1
TX queue: 0
TX desc=512 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x0 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0x1 Tx offloads=0x0
RX queue: 0
RX desc=512 - RX free threshold=32
RX threshold registers: pthresh=0 hthresh=0 wthresh=0
RX Offloads=0x1
TX queue: 0
TX desc=512 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x0 - TX RS bit threshold=32
5. Use Moongen to do the DPDK VF throughput tests
# ./build/MoonGen throughput.lua 88:66:da:5f:dd:02 88:66:da:5f:dd:03
6. check the dpdk-testpmd all ports' throughput
testpmd> show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 511 RX-missed: 0 RX-bytes: 30660
RX-errors: 0
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 1 ########################
RX-packets: 511 RX-missed: 0 RX-bytes: 31208
RX-errors: 0
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
# ./build/MoonGen throughput.lua 88:66:da:5f:dd:02 88:66:da:5f:dd:03
...
[Device: id=1] Received 88 packets with 15328 bytes payload (including CRC).
[Device: id=1] Received 0.000000 (StdDev 0.000000) Mpps, 0.000205 (StdDev
0.000728) MBit/s, 0.000228 (StdDev 0.000799) MBit/s wire rate on average.
loop count: 136345435 frames dropped: 8589762317 (100.0000%)
[Device: id=0] Received 74 packets with 12908 bytes payload (including CRC).
[Device: id=0] Received 0.000000 (StdDev 0.000000) Mpps, 0.000172 (StdDev
0.000661) MBit/s, 0.000192 (StdDev 0.000723) MBit/s wire rate on average.
loop count: 132644066 frames dropped: 8356576084 (100.0000%)
Finshed final validation of the maximum frame rate 0.00 (millions per second)
with a frame size of 64
Final validation failed
7. Repeat the above test with dpdk-21.11-2 , the dpdk-testpmd can forward
package successfully
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #2: Type: text/html, Size: 8162 bytes --]
next reply other threads:[~2023-07-07 7:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-07 7:41 bugzilla [this message]
2023-07-07 8:42 ` [Bug 1261] [dpdk 23.07] the dpdk-testpmd (based on VF) 's throughput is 0 bugzilla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-1261-3@http.bugs.dpdk.org/ \
--to=bugzilla@dpdk.org \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.