From: bugme-daemon@bugzilla.kernel.org
To: linux-scsi@vger.kernel.org
Subject: [Bug 12727] New: AIC79xx problem on Adaptec 29320A-P controller
Date: Tue, 17 Feb 2009 10:09:40 -0800 (PST) [thread overview]
Message-ID: <bug-12727-11613@http.bugzilla.kernel.org/> (raw)
http://bugzilla.kernel.org/show_bug.cgi?id=12727
Summary: AIC79xx problem on Adaptec 29320A-P controller
Product: SCSI Drivers
Version: 2.5
KernelVersion: 2.6.25.20-0.1-default
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Other
AssignedTo: scsi_drivers-other@kernel-bugs.osdl.org
ReportedBy: j@jensen-net.org
Latest working kernel version: N/A
Earliest failing kernel version: 2.6.25.20-0.1-default
Distribution: OpenSUSE 11.0
Hardware Environment: Supermicro server
Software Environment:
Problem Description:
When there is a pause in writing to the tape after that the error occurs.
Steps to reproduce: tar some data to tape.
Hardware information and error is below:
Linux version 2.6.25.20-0.1-default (geeko@buildhost) (gcc version 4.3.1
20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP
2008-12-12 20:30:38 +0100
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
<Adaptec 29320A Ultra320 SCSI adapter>
aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
target0:0:3: asynchronous
scsi 0:0:3:0: Sequential-Access IBM ULTRIUM-TD3 7AP5 PQ: 0 ANSI: 3
target0:0:3: Beginning Domain Validation
target0:0:3: wide asynchronous
target0:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
target0:0:3: Ending Domain Validation
scsi 0:0:3:1: Medium Changer EXABYTE MAGNUM 224 C270 PQ: 0 ANSI: 4
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
st: Version 20080221, fixed bufsize 32768, s/g segs 256
st 0:0:3:0: Attached scsi tape st0
st 0:0:3:0: st0: try direct i/o: yes (alignment 4 B)
st0: Block limits 1 - 16777215 bytes.
scsi0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x7f Mode 0x22
Card was paused
INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI)
SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE)
SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1]
MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 20614 qinfifonext = 20614
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37]
Total 1
Kernel Free SCB list: 3 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE)
SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108
scsi0: SCBPTR == 0xff02, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 2 1 0 0 0 0
STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0: Split completion read data parity error in DFF1
scsi0: Address or Write Phase Parity Error Detected in DFF1.
scsi0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x33 Mode 0x11
Card was paused
INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI)
SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE)
SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1]
MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 20906 qinfifonext = 20906
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37]
Total 1
Kernel Free SCB list: 3 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE)
SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108
scsi0: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff80
CDB a 0 0 81 8 28
STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0: Split completion read data parity error in DFF1
scsi0: Address or Write Phase Parity Error Detected in DFF1.
scsi0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x20a Mode 0x11
Card was paused
INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI)
SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE)
SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1]
MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 21586 qinfifonext = 21586
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37]
Total 1
Kernel Free SCB list: 3 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE)
SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108
scsi0: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff80
CDB a 0 0 81 8 28
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0: Split completion read data parity error in DFF1
scsi0: Address or Write Phase Parity Error Detected in DFF1.
scsi0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x33 Mode 0x11
Card was paused
INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI)
SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE)
SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1]
MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 39723 qinfifonext = 39723
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37]
Total 1
Kernel Free SCB list: 3 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE)
SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108
scsi0: SCBPTR == 0x2, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff80
CDB a 0 0 81 8 28
STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0: Split completion read data parity error in DFF1
scsi0: Address or Write Phase Parity Error Detected in DFF1.
scsi0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x33 Mode 0x11
Card was paused
INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0x25]:(P_DATAOUT_DT|ACKI|BSYI)
SCSIPHASE[0x0] SCSIBUS[0x74] LASTPHASE[0x20]:(P_DATAOUT_DT)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE)
SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1]
MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 39944 qinfifonext = 39944
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37]
Total 1
Kernel Free SCB list: 3 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE)
SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108
scsi0: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff80
CDB a 0 0 81 8 28
STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0: Split completion read data parity error in DFF1
scsi0: Address or Write Phase Parity Error Detected in DFF1.
scsi0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x2e Mode 0x0
Card was paused
INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI)
SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE)
SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1]
MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 40103 qinfifonext = 40103
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37]
Total 1
Kernel Free SCB list: 3 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE)
SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi0: REG0 == 0x111c, SINDEX = 0x180, DINDEX = 0x108
scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 0 0 0 0 0 0
STACK: 0x20b 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0: Split completion read data parity error in DFF1
scsi0: Address or Write Phase Parity Error Detected in DFF1.
scsi0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x34 Mode 0x22
Card was paused
INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI)
SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE)
SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1]
MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 57319 qinfifonext = 57319
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37]
Total 1
Kernel Free SCB list: 3 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE)
SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108
scsi0: SCBPTR == 0xff02, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 2 1 0 0 0 0
STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0: Split completion read data parity error in DFF1
scsi0: Address or Write Phase Parity Error Detected in DFF1.
scsi0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x30 Mode 0x0
Card was paused
INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI)
SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE)
SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1]
MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 57673 qinfifonext = 57673
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37]
Total 1
Kernel Free SCB list: 3 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE)
SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi0: REG0 == 0x111c, SINDEX = 0x180, DINDEX = 0x108
scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 0 0 0 0 0 0
STACK: 0x20b 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0: Split completion read data parity error in DFF1
scsi0: Address or Write Phase Parity Error Detected in DFF1.
scsi0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x20b Mode 0x11
Card was paused
INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI)
SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE)
SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1]
MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 58746 qinfifonext = 58746
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37]
Total 1
Kernel Free SCB list: 3 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE)
SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108
scsi0: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff80
CDB a 0 0 81 8 28
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0: Split completion read data parity error in DFF1
scsi0: Address or Write Phase Parity Error Detected in DFF1.
scsi0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x7f Mode 0x22
Card was paused
INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI)
SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE)
SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1]
MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 61030 qinfifonext = 61030
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37]
Total 1
Kernel Free SCB list: 3 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE)
SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108
scsi0: SCBPTR == 0xff02, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 2 1 0 0 0 0
STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0: Split completion read data parity error in DFF1
scsi0: Address or Write Phase Parity Error Detected in DFF1.
scsi0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x20d Mode 0x33
Card was paused
INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI)
SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE)
SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1]
MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 62093 qinfifonext = 62093
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37]
Total 1
Kernel Free SCB list: 3 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE)
SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108
scsi0: SCBPTR == 0x2, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff80
CDB a 0 0 81 8 28
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0: Split completion read data parity error in DFF1
scsi0: Address or Write Phase Parity Error Detected in DFF1.
scsi0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x20a Mode 0x11
Card was paused
INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI)
SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE)
SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1]
MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 24670 qinfifonext = 24670
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37]
Total 1
Kernel Free SCB list: 3 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE)
SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108
scsi0: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff80
CDB a 0 0 81 8 28
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0: Split completion read data parity error in DFF1
scsi0: Address or Write Phase Parity Error Detected in DFF1.
scsi0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x7c Mode 0x22
Card was paused
INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI)
SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE)
SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1]
MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 25496 qinfifonext = 25496
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37]
Total 1
Kernel Free SCB list: 3 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE)
SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108
scsi0: SCBPTR == 0xff02, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 2 1 0 0 0 0
STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0: Split completion read data parity error in DFF1
scsi0: Address or Write Phase Parity Error Detected in DFF1.
scsi0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x7c Mode 0x22
Card was paused
INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI)
SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE)
SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1]
MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 26162 qinfifonext = 26162
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37]
Total 1
Kernel Free SCB list: 3 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE)
SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108
scsi0: SCBPTR == 0xff02, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 2 1 0 0 0 0
STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0: Split completion read data parity error in DFF1
scsi0: Address or Write Phase Parity Error Detected in DFF1.
scsi0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x34 Mode 0x22
Card was paused
INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI)
SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE)
SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1]
MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 26663 qinfifonext = 26663
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37]
Total 1
Kernel Free SCB list: 3 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE)
SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108
scsi0: SCBPTR == 0xff02, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 2 1 0 0 0 0
STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0: Split completion read data parity error in DFF1
scsi0: Address or Write Phase Parity Error Detected in DFF1.
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
next reply other threads:[~2009-02-17 18:10 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-17 18:09 bugme-daemon [this message]
2009-06-12 14:41 ` [Bug 12727] New: AIC79xx problem on Adaptec 29320A-P controller James Bottomley
2009-06-13 17:19 ` James Bottomley
2009-06-12 14:42 ` [Bug 12727] " bugzilla-daemon
2009-06-13 17:19 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-12727-11613@http.bugzilla.kernel.org/ \
--to=bugme-daemon@bugzilla.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.