From: bugzilla at busybox.net <bugzilla@busybox.net>
To: buildroot@busybox.net
Subject: [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
Date: Tue, 11 Aug 2020 07:26:51 +0000 [thread overview]
Message-ID: <bug-13146-163-Lfef7Qayhl@https.bugs.busybox.net/> (raw)
In-Reply-To: <bug-13146-163@https.bugs.busybox.net/>
https://bugs.busybox.net/show_bug.cgi?id=13146
--- Comment #4 from Marie Maurer <marie.maurer@mmeacs.de> ---
(In reply to Marie Maurer from comment #3)
Wrong log output in previous comment, sorry!
Here is the right one:
>>> Executing post-image script board/raspberrypi3/post-image.sh
board/raspberrypi3/genimage-raspberrypi3.cfg:34: no sub-section title/index for
'config'
INFO: cmd: "mkdir -p
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp""
(stderr):
INFO: cmd: "rm -rf
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp"/*"
(stderr):
INFO: cmd: "mkdir -p
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp""
(stderr):
INFO: cmd: "cp -a "/tmp/tmp.gpxMoEOrt8"
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp/root""
(stderr):
INFO: cmd: "find
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp/root'
-depth -type d -printf '%P\0' | xargs -0 -I {} touch -r
'/tmp/tmp.gpxMoEOrt8/{}'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp/root/{}'"
(stderr):
INFO: cmd: "mkdir -p
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images""
(stderr):
INFO: vfat(boot.vfat): cmd: "dd if=/dev/zero
of="/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat"
seek=33554432 count=0 bs=1 2>/dev/null" (stderr):
INFO: vfat(boot.vfat): cmd: "mkdosfs
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'"
(stderr):
INFO: vfat(boot.vfat): adding file 'bcm2710-rpi-3-b.dtb' as
'bcm2710-rpi-3-b.dtb' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/bcm2710-rpi-3-b.dtb'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'bcm2710-rpi-3-b-plus.dtb' as
'bcm2710-rpi-3-b-plus.dtb' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/bcm2710-rpi-3-b-plus.dtb'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'bcm2710-rpi-cm3.dtb' as
'bcm2710-rpi-cm3.dtb' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/bcm2710-rpi-cm3.dtb'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/bootcode.bin' as
'rpi-firmware/bootcode.bin' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/bootcode.bin'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/cmdline.txt' as
'rpi-firmware/cmdline.txt' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/cmdline.txt'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/config.txt' as
'rpi-firmware/config.txt' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/config.txt'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/fixup.dat' as
'rpi-firmware/fixup.dat' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/fixup.dat'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/start.elf' as
'rpi-firmware/start.elf' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/start.elf'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/overlays' as
'rpi-firmware/overlays' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/overlays'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'zImage' as 'zImage' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/zImage'
'::'" (stderr):
INFO: hdimage(sdcard.img): adding partition 'boot' (in MBR) from 'boot.vfat'
...
ERROR: hdimage(sdcard.img): fiemap
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat:
25 Inappropriate ioctl for device
ERROR: hdimage(sdcard.img): failed to write image partition 'boot'
INFO: hdimage(sdcard.img): cmd: "rm -f
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/sdcard.img""
(stderr):
ERROR: hdimage(sdcard.img): failed to generate sdcard.img
make: *** [Makefile:835: target-post-image] Error 1
--
You are receiving this mail because:
You are on the CC list for the bug.
next prev parent reply other threads:[~2020-08-11 7:26 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-10 19:08 [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
2020-08-10 21:24 ` [Buildroot] [Bug 13146] " bugzilla at busybox.net
2020-08-11 6:59 ` bugzilla at busybox.net
2020-08-11 7:24 ` bugzilla at busybox.net
2020-08-11 7:26 ` bugzilla at busybox.net [this message]
2020-08-11 7:38 ` bugzilla at busybox.net
2020-08-11 15:47 ` bugzilla at busybox.net
2020-08-11 16:58 ` bugzilla at busybox.net
2020-08-11 17:00 ` bugzilla at busybox.net
2020-08-11 19:27 ` bugzilla at busybox.net
2020-08-11 19:31 ` bugzilla at busybox.net
2020-08-11 19:33 ` bugzilla at busybox.net
2020-08-11 20:10 ` bugzilla at busybox.net
2020-08-11 20:14 ` bugzilla at busybox.net
2020-08-12 15:38 ` bugzilla at busybox.net
2020-08-12 19:23 ` bugzilla at busybox.net
2020-08-12 19:40 ` bugzilla at busybox.net
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-13146-163-Lfef7Qayhl@https.bugs.busybox.net/ \
--to=bugzilla@busybox.net \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.