From: bugzilla-daemon@bugzilla.kernel.org
To: linux-ide@vger.kernel.org
Subject: [Bug 13286] New: dma_timer_expiry: DMA status (0x21)
Date: Tue, 12 May 2009 06:35:53 GMT [thread overview]
Message-ID: <bug-13286-11633@http.bugzilla.kernel.org/> (raw)
http://bugzilla.kernel.org/show_bug.cgi?id=13286
Summary: dma_timer_expiry: DMA status (0x21)
Product: IO/Storage
Version: 2.5
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: IDE
AssignedTo: io_ide@kernel-bugs.osdl.org
ReportedBy: fibre_optic@go2.pl
Regression: No
Hello,
I have Dell Optiplex with ide->CF-Flash card interface. This configuration
works well with 2.6.27.21 but it generates the following messages on 2.6.29.3:
...
hda: dma_timer_expiry: DMA status (0x21)
hda: DMA timeout error
...
Here you have more data, if you need something more please let me know.
PS
This issue takes place with 2.6.28 too.
# dmesg
...
Scanning for low memory corruption every 60 seconds
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 498
io scheduler noop registered (default)
pci 0000:00:01.0: Boot video device
brd: module loaded
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x2411 rev 0x02)
piix 0000:00:1f.1: IDE port disabled
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7
Probing IDE interface ide0...
hda: SanDisk SDCFJ-32, CFA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO2
hda: MWDMA2 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide_generic: please use "probe_mask=0x3f" module parameter for probing all
legacy ISA IDE ports
ide-gd driver 1.18
hda: max request size: 128KiB
hda: 62720 sectors (32 MB) w/1KiB Cache, CHS=490/4/32
hda:<4>hda: dma_timer_expiry: DMA status (0x21)
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hda1 hda2
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IO APIC resources could be not be allocated.
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input0
Clocksource tsc unstable (delta = 1024062479 ns)
hda: dma_timer_expiry: DMA status (0x21)
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hda: dma_timer_expiry: DMA status (0x21)
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hda: dma_timer_expiry: DMA status (0x21)
hda: DMA timeout error
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
VFS: Mounted root (ext2 filesystem) readonly on device 3:1.
Freeing unused kernel memory: 168k freed
...
# lspci
00:00.0 Host bridge: Intel Corporation 82810 DC-100 (GMCH) Graphics Memory
Controller Hub (rev 03)
00:01.0 VGA compatible controller: Intel Corporation 82810 DC-100 (CGC) Chipset
Graphics Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02)
00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller (rev 02)
01:07.0 PCI bridge: Digital Equipment Corporation DECchip 21153 (rev 04)
01:08.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC
(rev 01)
02:00.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
02:00.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal 10/100
Ethernet [hme] (rev 01)
02:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
02:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal 10/100
Ethernet [hme] (rev 01)
02:02.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
02:02.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal 10/100
Ethernet [hme] (rev 01)
02:03.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
02:03.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal 10/100
Ethernet [hme] (rev 01)
# lspci -n
00:00.0 0600: 8086:7122 (rev 03)
00:01.0 0300: 8086:7123 (rev 03)
00:1e.0 0604: 8086:2418 (rev 02)
00:1f.0 0601: 8086:2410 (rev 02)
00:1f.1 0101: 8086:2411 (rev 02)
00:1f.2 0c03: 8086:2412 (rev 02)
00:1f.3 0c05: 8086:2413 (rev 02)
01:07.0 0604: 1011:0025 (rev 04)
01:08.0 0200: 168c:001a (rev 01)
02:00.0 0680: 108e:1000 (rev 01)
02:00.1 0200: 108e:1001 (rev 01)
02:01.0 0680: 108e:1000 (rev 01)
02:01.1 0200: 108e:1001 (rev 01)
02:02.0 0680: 108e:1000 (rev 01)
02:02.1 0200: 108e:1001 (rev 01)
02:03.0 0680: 108e:1000 (rev 01)
02:03.1 0200: 108e:1001 (rev 01)
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
next reply other threads:[~2009-05-12 6:35 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-12 6:35 bugzilla-daemon [this message]
2009-05-12 18:42 ` [Bug 13286] dma_timer_expiry: DMA status (0x21) bugzilla-daemon
2009-05-12 18:46 ` [Bug 13286] New: " Bartlomiej Zolnierkiewicz
2009-05-13 7:58 ` [Bug 13286] " bugzilla-daemon
2009-05-13 13:32 ` Bartlomiej Zolnierkiewicz
2009-05-13 13:28 ` bugzilla-daemon
2009-05-13 18:01 ` bugzilla-daemon
2009-05-13 18:35 ` Bartlomiej Zolnierkiewicz
2009-05-13 18:03 ` bugzilla-daemon
2009-05-13 18:04 ` bugzilla-daemon
2009-05-13 18:31 ` bugzilla-daemon
2009-05-13 18:32 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-13286-11633@http.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.