From: bugzilla@dpdk.org
To: dev@dpdk.org
Subject: [DPDK/ethdev Bug 1379] qede pmd driver does not work in Debian Bookworm
Date: Thu, 15 Feb 2024 02:13:45 +0000 [thread overview]
Message-ID: <bug-1379-3@http.bugs.dpdk.org/> (raw)
[-- Attachment #1: Type: text/plain, Size: 5270 bytes --]
https://bugs.dpdk.org/show_bug.cgi?id=1379
Bug ID: 1379
Summary: qede pmd driver does not work in Debian Bookworm
Product: DPDK
Version: 22.11
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: Normal
Component: ethdev
Assignee: dev@dpdk.org
Reporter: junszhao@cisco.com
Target Milestone: ---
dpdk qede pmd driver does not work in Debian Bookworm. dpdk-testpmd cannot
receive any packet due to nombuf. This happens to both kernel driver vfio-pci
and uio_pci_generic.
However
(1) Linux kernel's qede driver works fine.
(2) The Qlogic qede card and dpdk-testpmd works in Debian Bullseye.
Here are some logs:
show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 0 RX-missed: 9364844 RX-bytes: 0
RX-errors: 0
RX-nombuf: 9364844
TX-packets: 0 TX-errors: 0 TX-bytes: 0
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
show port info all
********************* Infos for port 0 *********************
MAC address: F4:E9:D4:F2:38:98
Device name: 0000:d8:00.0
Driver name: net_qede
Firmware-version: 8.40.33.0 MFW: 8.40.31.0
Connect to socket: 1
memory allocation on the socket: 1
Link status: up
Link speed: 40 Gbps
Link duplex: full-duplex
Autoneg status: On
MTU: 1500
Promiscuous mode: enabled
Allmulticast mode: disabled
Maximum number of MAC addresses: 512
Maximum number of MAC addresses of hash filtering: 0
VLAN offload:
strip off, filter off, extend off, qinq strip off
Hash key size in bytes: 40
Redirection table size: 128
Supported RSS offload flow types:
ipv4 ipv4-tcp ipv4-udp ipv6 ipv6-tcp ipv6-udp vxlan
geneve
Minimum size of RX buffer: 1024
Maximum configurable length of RX packet: 9672
Maximum configurable size of LRO aggregated packet: 0
Current number of RX queues: 4
Max possible RX queues: 32
Max possible number of RXDs per queue: 32768
Min possible number of RXDs per queue: 128
RXDs number alignment: 128
Current number of TX queues: 4
Max possible TX queues: 32
Max possible number of TXDs per queue: 32768
Min possible number of TXDs per queue: 256
TXDs number alignment: 256
Max segment number per packet: 255
Max segment number per MTU/TSO: 18
Device capabilities: 0x0( )
Device error handling mode: none
testpmd> show port info 1
========== kernel and driver information
fs4240-87-87:~# uname -r
6.1.0-17-amd64
ii dpdk 22.11.4-1~deb12u1
ii librte-net-qede23:amd64 22.11.4-1~deb12u1
d8:00.0 Ethernet controller: QLogic Corp. FastLinQ QL45000 Series 40GbE
Controller (rev 10)
Subsystem: Cisco Systems Inc FastLinQ QL45000 Series 40GbE Controller
Flags: fast devsel, IRQ 119, NUMA node 1, IOMMU group 11
Memory at fb880000 (64-bit, prefetchable) [size=512K]
Memory at fb000000 (64-bit, prefetchable) [size=8M]
Memory at fb910000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fbe80000 [disabled] [size=512K]
Capabilities: [48] Power Management version 3
Capabilities: [50] Vital Product Data
Capabilities: [58] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [a0] MSI-X: Enable- Count=129 Masked-
Capabilities: [ac] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [160] Virtual Channel
Capabilities: [1b0] Latency Tolerance Reporting
Capabilities: [1b8] Alternative Routing-ID Interpretation (ARI)
Capabilities: [230] Transaction Processing Hints
Capabilities: [300] Secondary PCI Express
Capabilities: [200] Precision Time Measurement
Kernel driver in use: vfio-pci
Kernel modules: qede
d8:00.1 Ethernet controller: QLogic Corp. FastLinQ QL45000 Series 40GbE
Controller (rev 10)
Subsystem: Cisco Systems Inc FastLinQ QL45000 Series 40GbE Controller
Flags: fast devsel, IRQ 121, NUMA node 1, IOMMU group 11
Memory at fb800000 (64-bit, prefetchable) [size=512K]
Memory at fa800000 (64-bit, prefetchable) [size=8M]
Memory at fb900000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fbe00000 [disabled] [size=512K]
Capabilities: [48] Power Management version 3
Capabilities: [50] Vital Product Data
Capabilities: [58] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [a0] MSI-X: Enable- Count=129 Masked-
Capabilities: [ac] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [1b8] Alternative Routing-ID Interpretation (ARI)
Capabilities: [230] Transaction Processing Hints
Kernel driver in use: vfio-pci
Kernel modules: qede
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #2: Type: text/html, Size: 7149 bytes --]
reply other threads:[~2024-02-15 2:13 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-1379-3@http.bugs.dpdk.org/ \
--to=bugzilla@dpdk.org \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.