dpdk tools:

Network devices using DPDK-compatible driver
============================================
0000:b1:00.0 'Ethernet Controller X710 for 10GbE SFP+ 1572' drv=vfio-pci
unused=i40e

ovs-vswitchd:
2024-04-28T10:56:02.508Z|00518|dpdk|ERR|EAL: Driver cannot attach the device
(0000:b1:00.0)
2024-04-28T10:56:02.508Z|00519|dpdk|ERR|EAL: Failed to attach device on primary
process
2024-04-28T10:56:02.508Z|00520|netdev_dpdk|WARN|Error attaching device
'0000:b1:00.0' to DPDK
2024-04-28T10:56:02.508Z|00521|netdev|WARN|eth4: could not set configuration
(Invalid argument)
2024-04-28T10:56:02.508Z|00522|dpdk|ERR|Invalid port_id=288

CPU INFO:
Architecture:            x86_64
  CPU op-mode(s):        32-bit, 64-bit
  Address sizes:         52 bits physical, 57 bits virtual
  Byte Order:            Little Endian
CPU(s):                  128
  On-line CPU(s) list:   0-127
Vendor ID:               AuthenticAMD
  BIOS Vendor ID:        Advanced Micro Devices, Inc.
  Model name:            AMD EPYC 9334 32-Core Processor
    BIOS Model name:     AMD EPYC 9334 32-Core Processor

HugePages_Total:      12
HugePages_Free:       11
HugePages_Rsvd:        0
HugePages_Surp:        0


other_config        : {dpdk-init="true", dpdk-socket-mem="1024,1024",
pmd-cpu-mask="0x100", userspace-tso-enable="true", vlan-limit="0"}