From: bugzilla-daemon@bugzilla.kernel.org
To: dri-devel@lists.sourceforge.net
Subject: [Bug 15002] New: invalid EDID checksum pause boot for 130 sec - kms, radeon
Date: Thu, 7 Jan 2010 13:50:22 GMT [thread overview]
Message-ID: <bug-15002-2300@http.bugzilla.kernel.org/> (raw)
http://bugzilla.kernel.org/show_bug.cgi?id=15002
Summary: invalid EDID checksum pause boot for 130 sec - kms,
radeon
Product: Drivers
Version: 2.5
Kernel Version: 2.6.33-rc3 2c1f1895ef2aa8f0e5497893eff71304aef332e1
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Video(DRI - non Intel)
AssignedTo: drivers_video-dri@kernel-bugs.osdl.org
ReportedBy: pl4nkton@googlemail.com
Regression: No
macbook pro 2,2
M56P Radeon Mobility X1600
[ 0.295335] [drm] Initialized drm 1.1.0 20060810
[ 0.295388] [drm] radeon defaulting to kernel modesetting.
[ 0.295389] [drm] radeon kernel modesetting enabled.
[ 0.295434] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.295439] radeon 0000:01:00.0: setting latency timer to 64
[ 0.298528] [drm] radeon: Initializing kernel modesetting.
[ 0.298624] [drm] register mmio base: 0x90300000
[ 0.298625] [drm] register mmio size: 65536
[ 0.298713] ATOM BIOS: M56P
[ 0.298942] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[ 0.298955] [drm] Generation 2 PCI interface, using max accessible memory
[ 0.298958] [drm] radeon: VRAM 128M
[ 0.298959] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[ 0.298961] [drm] radeon: GTT 512M
[ 0.298962] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[ 0.299018] radeon 0000:01:00.0: irq 28 for MSI/MSI-X
[ 0.299023] [drm] radeon: using MSI.
[ 0.299047] [drm] radeon: irq initialized.
[ 0.300510] [drm] Detected VRAM RAM=128M, BAR=128M
[ 0.300514] [drm] RAM width 128bits DDR
[ 0.300809] [TTM] Zone kernel: Available graphics memory: 1020878 kiB.
[ 0.300823] [drm] radeon: 128M of VRAM memory ready
[ 0.300825] [drm] radeon: 512M of GTT memory ready.
[ 0.300841] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 0.302714] [drm] radeon: 1 quad pipes, 2 z pipes initialized.
[ 0.302747] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 0.302759] [drm] radeon: cp idle (0x10000C03)
[ 0.302856] [drm] Loading R500 Microcode
[ 0.302859] platform radeon_cp.0: firmware: using built-in firmware
radeon/R520_cp.bin
[ 0.303028] [drm] radeon: ring at 0x0000000020000000
[ 0.303064] [drm] ring test succeeded in 9 usecs
[ 0.303155] [drm] radeon: ib pool ready.
[ 0.303237] [drm] ib test succeeded in 0 usecs
[ 0.303425] [drm] Default TV standard: NTSC
[ 0.303907] [drm] Radeon Display Connectors
[ 0.303909] [drm] Connector 0:
[ 0.303910] [drm] LVDS
[ 0.303912] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c
0x7e6c
[ 0.303913] [drm] Encoders:
[ 0.303914] [drm] LCD1: INTERNAL_LVTM1
[ 0.303916] [drm] Connector 1:
[ 0.303917] [drm] S-video
[ 0.303918] [drm] Encoders:
[ 0.303919] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 0.303920] [drm] Connector 2:
[ 0.303922] [drm] DVI-I
[ 0.303923] [drm] HPD1
[ 0.303924] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c
0x7e4c
[ 0.303926] [drm] Encoders:
[ 0.303927] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 0.303928] [drm] Connector 3:
[ 0.303929] [drm] VGA
[ 0.303931] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c
0x7e5c
[ 0.303933] [drm] Encoders:
[ 0.303934] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 0.355828] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder
is 130
[ 0.355872] [drm:edid_is_valid] *ERROR* Raw EDID:
[ 0.355913] <3>00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
................
[ 0.355915] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
................
[ 0.355917] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
................
[ 0.355919] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
................
[ 0.355921] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
................
[ 0.355923] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
................
[ 0.355924] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
................
[ 0.355926] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
................
[ 0.355928]
[ 0.397678] ACPI: Battery Slot [BAT0] (battery present)
[ 0.584399] [drm] fb mappable at 0x800C0000
[ 0.584401] [drm] vram apper at 0x80000000
[ 0.584403] [drm] size 5299200
[ 0.584404] [drm] fb depth is 24
[ 0.584405] [drm] pitch is 5888
[ 131.169012] executing set pll
[ 131.181016] executing set crtc timing
[ 131.181043] [drm] LVDS-9: set mode 1440x900 1c
[ 131.216058] Console: switching to colour frame buffer device 180x56
[ 131.219331] fb0: radeondrmfb frame buffer device
[ 131.219333] registered panic notifier
[ 131.219345] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on
minor 0
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
------------------------------------------------------------------------------
This SF.Net email is sponsored by the Verizon Developer Community
Take advantage of Verizon's best-in-class app development support
A streamlined, 14 day to market process makes app distribution fast and easy
Join now and get one step closer to millions of Verizon customers
http://p.sf.net/sfu/verizon-dev2dev
--
next reply other threads:[~2010-01-07 13:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-07 13:50 bugzilla-daemon [this message]
2010-01-07 15:03 ` [Bug 15002] invalid EDID checksum pause boot for 130 sec - kms, radeon bugzilla-daemon
2010-01-12 0:58 ` bugzilla-daemon
2010-01-24 17:39 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-15002-2300@http.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=dri-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.