when build with gcc 10.3.1, start with error:
=================
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_txgbe (8088:1001) device: 0000:71:00.1 (socket 7)
eth_txgbe_dev_init(): The EEPROM checksum is not valid: -258
ethdev initialisation failed
EAL: Releasing PCI mapped resource for 0000:71:00.1
EAL: Calling pci_unmap_resource for 0000:71:00.1 at 0x7f58e57e0000
EAL: Calling pci_unmap_resource for 0000:71:00.1 at 0x7f74efc4e000
EAL: Requested device 0000:71:00.1 cannot be used
EAL: Bus (pci) probe failed.
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Error - exiting with code: 1
=================

but, when gcc version change to 4.8.5, it's ok.

DPDK: "21.11"
NIC: "Ethernet Controller RP1000 for 10GbE SFP+ 1001"
driver: "txgbe"