From: bugzilla-daemon@bugzilla.kernel.org
To: dri-devel@lists.sourceforge.net
Subject: [Bug 16569] New: r600_cp: Failed to load firmware "radeon/CYPRESS_pfp.bin"
Date: Thu, 12 Aug 2010 09:16:52 GMT [thread overview]
Message-ID: <bug-16569-2300@https.bugzilla.kernel.org/> (raw)
https://bugzilla.kernel.org/show_bug.cgi?id=16569
Summary: r600_cp: Failed to load firmware
"radeon/CYPRESS_pfp.bin"
Product: Drivers
Version: 2.5
Kernel Version: 2.6.35.1
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Video(DRI - non Intel)
AssignedTo: drivers_video-dri@kernel-bugs.osdl.org
ReportedBy: kmshanah@disenchant.net
Regression: No
Created an attachment (id=27415)
--> (https://bugzilla.kernel.org/attachment.cgi?id=27415)
kernel config file
On boot of 2.6.35 or 2.6.35.1 the kernel freezes for 60 seconds trying to load
the CYPRESS firmware:
[ 0.940129] [drm] Loading CYPRESS Microcode
[ 61.066755] r600_cp: Failed to load firmware "radeon/CYPRESS_pfp.bin"
This is on Debian Sid, Intel X9770 CPU. Hopefully it's not just because I
messed up something making the initramfs, but I'm pretty sure I have that
right:
kmshanah@tomas:~$ gunzip -c /boot/initrd.img-2.6.35.1 | cpio --list | grep
radeon
9242 blocks
etc/modprobe.d/radeon-kms.conf
lib/firmware/radeon
lib/firmware/radeon/RV620_pfp.bin
lib/firmware/radeon/CEDAR_pfp.bin
lib/firmware/radeon/RV670_me.bin
lib/firmware/radeon/RV770_me.bin
lib/firmware/radeon/REDWOOD_me.bin
lib/firmware/radeon/CYPRESS_pfp.bin
lib/firmware/radeon/CYPRESS_me.bin
lib/firmware/radeon/RV610_pfp.bin
lib/firmware/radeon/RV730_me.bin
lib/firmware/radeon/RS780_pfp.bin
lib/firmware/radeon/R600_rlc.bin
lib/firmware/radeon/RV710_pfp.bin
lib/firmware/radeon/CEDAR_rlc.bin
lib/firmware/radeon/R700_rlc.bin
lib/firmware/radeon/RV610_me.bin
lib/firmware/radeon/RS600_cp.bin
lib/firmware/radeon/R600_me.bin
lib/firmware/radeon/R100_cp.bin
lib/firmware/radeon/RV770_pfp.bin
lib/firmware/radeon/R300_cp.bin
lib/firmware/radeon/JUNIPER_me.bin
lib/firmware/radeon/CEDAR_me.bin
lib/firmware/radeon/R200_cp.bin
lib/firmware/radeon/REDWOOD_pfp.bin
lib/firmware/radeon/RV620_me.bin
lib/firmware/radeon/RV730_pfp.bin
lib/firmware/radeon/JUNIPER_rlc.bin
lib/firmware/radeon/RV670_pfp.bin
lib/firmware/radeon/RV630_pfp.bin
lib/firmware/radeon/R600_pfp.bin
lib/firmware/radeon/R420_cp.bin
lib/firmware/radeon/RV630_me.bin
lib/firmware/radeon/REDWOOD_rlc.bin
lib/firmware/radeon/RV710_me.bin
lib/firmware/radeon/R520_cp.bin
lib/firmware/radeon/JUNIPER_pfp.bin
lib/firmware/radeon/CYPRESS_rlc.bin
lib/firmware/radeon/RS780_me.bin
lib/firmware/radeon/RV635_me.bin
lib/firmware/radeon/RS690_cp.bin
lib/firmware/radeon/RV635_pfp.bin
Full dmesg below, will attach config:
[ 0.000000] Linux version 2.6.35.1 (kmshanah@tomas) (gcc version 4.4.5
20100728 (prerelease) (Debian 4.4.4-8) ) #1 SMP PREEMPT Thu Aug 12 18:09:47 CST
2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.35.1
root=UUID=f7acf711-32f3-4743-8ee8-1ef6a7d1c053 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable)
==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 130000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0CFF00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000f5390] f5390
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfee0000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ c000-12000
[ 0.000000] RAMDISK: 37dbc000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f6d80 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfee3040 00038 (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfee30c0 00074 (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfee3180 04BCE (v01 GBT GBTUACPI 00001000
MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000cfee0000 00040
[ 0.000000] ACPI: HPET 00000000cfee7ec0 00038 (v01 GBT GBTUACPI 42302E31
GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfee7f40 0003C (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000cfee7dc0 00084 (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000cfee88a0 003AB (v01 PmRef CpuPm 00003000
INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD ->
[ffff880002200000-ffff880005bfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cfee0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048189
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3941 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [3000 - 37ff]
[ 0.000000] Allocating PCI resources starting at e4000000 (gap:
e4000000:1ac00000)
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 24 pages/cpu @ffff880001a00000 s77696 r0 d20608
u524288
[ 0.000000] pcpu-alloc: s77696 r0 d20608 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 1031165
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.35.1
root=UUID=f7acf711-32f3-4743-8ee8-1ef6a7d1c053 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (53 early reservations)
[ 0.000000] #1 [0001000000 - 00019514b4] TEXT DATA BSS
[ 0.000000] #2 [0037dbc000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [0001952000 - 00019520f6] BRK
[ 0.000000] #4 [00000f53a0 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000f5390 - 00000f53a0] MP-table mpf
[ 0.000000] #6 [000009e800 - 00000f0d00] BIOS reserved
[ 0.000000] #7 [00000f0edc - 00000f5390] BIOS reserved
[ 0.000000] #8 [00000f0d00 - 00000f0edc] MP-table mpc
[ 0.000000] #9 [0000001000 - 0000003000] TRAMPOLINE
[ 0.000000] #10 [0000008000 - 000000c000] PGTABLE
[ 0.000000] #11 [000000c000 - 000000d000] PGTABLE
[ 0.000000] #12 [0001952100 - 0001953100] BOOTMEM
[ 0.000000] #13 [00019514c0 - 00019517c0] BOOTMEM
[ 0.000000] #14 [0002154000 - 0002155000] BOOTMEM
[ 0.000000] #15 [0002155000 - 0002156000] BOOTMEM
[ 0.000000] #16 [0002200000 - 0005c00000] MEMMAP 0
[ 0.000000] #17 [00019517c0 - 0001951940] BOOTMEM
[ 0.000000] #18 [0001953100 - 000196b100] BOOTMEM
[ 0.000000] #19 [000196b100 - 0001971100] BOOTMEM
[ 0.000000] #20 [0001972000 - 0001973000] BOOTMEM
[ 0.000000] #21 [0001951940 - 0001951981] BOOTMEM
[ 0.000000] #22 [00019519c0 - 0001951a03] BOOTMEM
[ 0.000000] #23 [0001951a40 - 0001951ca8] BOOTMEM
[ 0.000000] #24 [0001951cc0 - 0001951d28] BOOTMEM
[ 0.000000] #25 [0001951d40 - 0001951da8] BOOTMEM
[ 0.000000] #26 [0001951dc0 - 0001951e28] BOOTMEM
[ 0.000000] #27 [0001951e40 - 0001951ea8] BOOTMEM
[ 0.000000] #28 [0001951ec0 - 0001951f28] BOOTMEM
[ 0.000000] #29 [0001951f40 - 0001951fa8] BOOTMEM
[ 0.000000] #30 [0001971100 - 0001971168] BOOTMEM
[ 0.000000] #31 [0001971180 - 00019711e8] BOOTMEM
[ 0.000000] #32 [0001971200 - 0001971268] BOOTMEM
[ 0.000000] #33 [0001971280 - 00019712e8] BOOTMEM
[ 0.000000] #34 [0001971300 - 000197134f] BOOTMEM
[ 0.000000] #35 [0001971380 - 00019713cf] BOOTMEM
[ 0.000000] #36 [0001a00000 - 0001a18000] BOOTMEM
[ 0.000000] #37 [0001a80000 - 0001a98000] BOOTMEM
[ 0.000000] #38 [0001b00000 - 0001b18000] BOOTMEM
[ 0.000000] #39 [0001b80000 - 0001b98000] BOOTMEM
[ 0.000000] #40 [0001951fc0 - 0001951fc8] BOOTMEM
[ 0.000000] #41 [0001971400 - 0001971408] BOOTMEM
[ 0.000000] #42 [0001971440 - 0001971450] BOOTMEM
[ 0.000000] #43 [0001971480 - 00019714a0] BOOTMEM
[ 0.000000] #44 [00019714c0 - 00019715f0] BOOTMEM
[ 0.000000] #45 [0001971600 - 0001971650] BOOTMEM
[ 0.000000] #46 [0001973000 - 000197b000] BOOTMEM
[ 0.000000] #47 [0001b98000 - 0001f98000] BOOTMEM
[ 0.000000] #48 [0005c00000 - 0005e00000] BOOTMEM
[ 0.000000] #49 [0005e00000 - 0009e00000] BOOTMEM
[ 0.000000] #50 [000197b000 - 000199b000] BOOTMEM
[ 0.000000] #51 [000199b000 - 00019db000] BOOTMEM
[ 0.000000] #52 [000000d000 - 0000015000] BOOTMEM
[ 0.000000] Memory: 4048884k/4980736k available (5575k kernel code, 787980k
absent, 143872k reserved, 2823k data, 496k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3196.177 MHz processor.
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6394.70 BogoMIPS (lpj=10653923)
[ 0.003392] pid_max: default: 32768 minimum: 301
[ 0.003433] Security Framework initialized
[ 0.003465] Mount-cache hash table entries: 256
[ 0.003587] CPU: Physical Processor ID: 0
[ 0.006668] CPU: Processor Core ID: 0
[ 0.006695] mce: CPU supports 6 MCE banks
[ 0.006725] CPU0: Thermal monitoring enabled (TM2)
[ 0.006753] using mwait in idle threads.
[ 0.006780] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.006876] ... version: 2
[ 0.006902] ... bit width: 40
[ 0.006928] ... generic registers: 2
[ 0.006955] ... value mask: 000000ffffffffff
[ 0.006982] ... max period: 000000007fffffff
[ 0.007009] ... fixed-purpose events: 3
[ 0.007035] ... event mask: 0000000700000003
[ 0.007088] ACPI: Core revision 20100428
[ 0.013062] Setting APIC routing to flat
[ 0.013332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.046446] CPU0: Intel(R) Core(TM)2 Extreme CPU X9770 @ 3.20GHz stepping
07
[ 0.053347] Booting Node 0, Processors #1 #2 #3 Ok.
[ 0.350009] Brought up 4 CPUs
[ 0.350052] Total of 4 processors activated (25583.13 BogoMIPS).
[ 0.352501] xor: automatically using best checksumming function: generic_sse
[ 0.366667] generic_sse: 11780.400 MB/sec
[ 0.366694] xor: using function: generic_sse (11780.400 MB/sec)
[ 0.366809] NET: Registered protocol family 16
[ 0.367483] ACPI: bus type pci registered
[ 0.367687] dca service started, version 1.12.1
[ 0.367786] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.367818] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.371583] PCI: Using configuration type 1 for base access
[ 0.385567] bio: create slab <bio-0> at 0
[ 0.386462] ACPI: EC: Look up EC in DSDT
[ 0.390490] ACPI: SSDT 00000000cfee7fc0 0022A (v01 PmRef Cpu0Ist 00003000
INTL 20040311)
[ 0.390723] ACPI: Dynamic OEM Table Load:
[ 0.390793] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL
20040311)
[ 0.391028] ACPI: SSDT 00000000cfee8480 00152 (v01 PmRef Cpu1Ist 00003000
INTL 20040311)
[ 0.391251] ACPI: Dynamic OEM Table Load:
[ 0.391320] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL
20040311)
[ 0.391558] ACPI: SSDT 00000000cfee85e0 00152 (v01 PmRef Cpu2Ist 00003000
INTL 20040311)
[ 0.391780] ACPI: Dynamic OEM Table Load:
[ 0.391850] ACPI: SSDT (null) 00152 (v01 PmRef Cpu2Ist 00003000 INTL
20040311)
[ 0.392086] ACPI: SSDT 00000000cfee8740 00152 (v01 PmRef Cpu3Ist 00003000
INTL 20040311)
[ 0.393752] ACPI: Dynamic OEM Table Load:
[ 0.393822] ACPI: SSDT (null) 00152 (v01 PmRef Cpu3Ist 00003000 INTL
20040311)
[ 0.393926] ACPI: Interpreter enabled
[ 0.393953] ACPI: (supports S0 S5)
[ 0.394026] ACPI: Using IOAPIC for interrupt routing
[ 0.403214] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.403315] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.403529] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.403557] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.403584] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.403615] pci_root PNP0A03:00: host bridge window [mem
0x000c0000-0x000dffff]
[ 0.403645] pci_root PNP0A03:00: host bridge window [mem
0xcff00000-0xfebfffff]
[ 0.403722] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.403724] pci 0000:00:06.0: PME# disabled
[ 0.403768] pci 0000:00:1a.0: reg 20: [io 0xe000-0xe01f]
[ 0.403817] pci 0000:00:1a.1: reg 20: [io 0xe100-0xe11f]
[ 0.403865] pci 0000:00:1a.2: reg 20: [io 0xe200-0xe21f]
[ 0.403906] pci 0000:00:1a.7: reg 10: [mem 0xe8405000-0xe84053ff]
[ 0.403961] pci 0000:00:1b.0: reg 10: [mem 0xe8400000-0xe8403fff 64bit]
[ 0.403992] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.403994] pci 0000:00:1b.0: PME# disabled
[ 0.404040] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.404043] pci 0000:00:1c.0: PME# disabled
[ 0.404092] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.404094] pci 0000:00:1c.3: PME# disabled
[ 0.404142] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.404144] pci 0000:00:1c.4: PME# disabled
[ 0.404191] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.404194] pci 0000:00:1c.5: PME# disabled
[ 0.404230] pci 0000:00:1d.0: reg 20: [io 0xe300-0xe31f]
[ 0.404278] pci 0000:00:1d.1: reg 20: [io 0xe400-0xe41f]
[ 0.404328] pci 0000:00:1d.2: reg 20: [io 0xe500-0xe51f]
[ 0.404369] pci 0000:00:1d.7: reg 10: [mem 0xe8404000-0xe84043ff]
[ 0.404488] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6
ACPI/GPIO/TCO
[ 0.404520] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6
GPIO
[ 0.404549] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask
000f)
[ 0.404581] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask
000f)
[ 0.404651] pci 0000:00:1f.2: reg 10: [io 0xe600-0xe607]
[ 0.404655] pci 0000:00:1f.2: reg 14: [io 0xe700-0xe703]
[ 0.404659] pci 0000:00:1f.2: reg 18: [io 0xe800-0xe807]
[ 0.404663] pci 0000:00:1f.2: reg 1c: [io 0xe900-0xe903]
[ 0.404667] pci 0000:00:1f.2: reg 20: [io 0xea00-0xea1f]
[ 0.404671] pci 0000:00:1f.2: reg 24: [mem 0xe8406000-0xe84067ff]
[ 0.404694] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.404696] pci 0000:00:1f.2: PME# disabled
[ 0.404716] pci 0000:00:1f.3: reg 10: [mem 0xe8407000-0xe84070ff 64bit]
[ 0.404725] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.404768] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.404775] pci 0000:01:00.0: reg 18: [mem 0xe5000000-0xe501ffff 64bit]
[ 0.404778] pci 0000:01:00.0: reg 20: [io 0xa000-0xa0ff]
[ 0.404785] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.404798] pci 0000:01:00.0: supports D1 D2
[ 0.404818] pci 0000:01:00.1: reg 10: [mem 0xe5020000-0xe5023fff 64bit]
[ 0.404843] pci 0000:01:00.1: supports D1 D2
[ 0.404853] pci 0000:00:06.0: PCI bridge to [bus 01-01]
[ 0.404880] pci 0000:00:06.0: bridge window [io 0xa000-0xafff]
[ 0.404882] pci 0000:00:06.0: bridge window [mem 0xe4000000-0xe5ffffff]
[ 0.404885] pci 0000:00:06.0: bridge window [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.404914] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.404943] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.404946] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff]
(disabled)
[ 0.404950] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
[ 0.405042] pci 0000:03:00.0: reg 24: [mem 0xe8100000-0xe8101fff]
[ 0.405074] pci 0000:03:00.0: PME# supported from D3hot
[ 0.405079] pci 0000:03:00.0: PME# disabled
[ 0.405116] pci 0000:03:00.1: reg 10: [io 0xb000-0xb007]
[ 0.405123] pci 0000:03:00.1: reg 14: [io 0xb100-0xb103]
[ 0.405131] pci 0000:03:00.1: reg 18: [io 0xb200-0xb207]
[ 0.405138] pci 0000:03:00.1: reg 1c: [io 0xb300-0xb303]
[ 0.405145] pci 0000:03:00.1: reg 20: [io 0xb400-0xb40f]
[ 0.405196] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.405224] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 0.405227] pci 0000:00:1c.3: bridge window [mem 0xe8100000-0xe81fffff]
[ 0.405231] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
[ 0.405283] pci 0000:04:00.0: reg 10: [io 0xc000-0xc0ff]
[ 0.405300] pci 0000:04:00.0: reg 18: [mem 0xe8010000-0xe8010fff 64bit pref]
[ 0.405311] pci 0000:04:00.0: reg 20: [mem 0xe8000000-0xe800ffff 64bit pref]
[ 0.405318] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.405350] pci 0000:04:00.0: supports D1 D2
[ 0.405352] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.405355] pci 0000:04:00.0: PME# disabled
[ 0.405374] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.405402] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.405405] pci 0000:00:1c.4: bridge window [mem 0xe6000000-0xe6ffffff]
[ 0.405409] pci 0000:00:1c.4: bridge window [mem 0xe8000000-0xe80fffff
64bit pref]
[ 0.405461] pci 0000:05:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.405478] pci 0000:05:00.0: reg 18: [mem 0xe8210000-0xe8210fff 64bit pref]
[ 0.405489] pci 0000:05:00.0: reg 20: [mem 0xe8200000-0xe820ffff 64bit pref]
[ 0.405496] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.405529] pci 0000:05:00.0: supports D1 D2
[ 0.405530] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.405534] pci 0000:05:00.0: PME# disabled
[ 0.405552] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 0.405581] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.405583] pci 0000:00:1c.5: bridge window [mem 0xe7000000-0xe7ffffff]
[ 0.405588] pci 0000:00:1c.5: bridge window [mem 0xe8200000-0xe82fffff
64bit pref]
[ 0.405627] pci 0000:06:06.0: reg 10: [mem 0xe8304000-0xe83047ff]
[ 0.405632] pci 0000:06:06.0: reg 14: [mem 0xe8300000-0xe8303fff]
[ 0.405666] pci 0000:06:06.0: supports D1 D2
[ 0.405668] pci 0000:06:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.405671] pci 0000:06:06.0: PME# disabled
[ 0.405701] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.405730] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.405733] pci 0000:00:1e.0: bridge window [mem 0xe8300000-0xe83fffff]
[ 0.405737] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
[ 0.405739] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.405741] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.405743] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
[ 0.405744] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff]
(subtractive decode)
[ 0.405746] pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff]
(subtractive decode)
[ 0.405763] pci_bus 0000:00: on NUMA node 0
[ 0.405766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.405862] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.405901] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.405945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.405980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.406015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.419197] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14
*15)
[ 0.419568] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14
15)
[ 0.419938] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14
15)
[ 0.420327] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
[ 0.420697] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 0.421110] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14
15)
[ 0.421480] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14
15)
[ 0.421850] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14
15)
[ 0.422414] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.422447] vgaarb: loaded
[ 0.422667] SCSI subsystem initialized
[ 0.422856] libata version 3.00 loaded.
[ 0.422966] usbcore: registered new interface driver usbfs
[ 0.423108] usbcore: registered new interface driver hub
[ 0.423222] usbcore: registered new device driver usb
[ 0.480016] raid6: int64x1 2668 MB/s
[ 0.536681] raid6: int64x2 2941 MB/s
[ 0.593344] raid6: int64x4 2491 MB/s
[ 0.650008] raid6: int64x8 1777 MB/s
[ 0.706670] raid6: sse2x1 5566 MB/s
[ 0.763336] raid6: sse2x2 6056 MB/s
[ 0.820006] raid6: sse2x4 9393 MB/s
[ 0.820032] raid6: using algorithm sse2x4 (9393 MB/s)
[ 0.820269] ACPI: WMI: Mapper loaded
[ 0.820364] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.820391] PCI: Using ACPI for IRQ routing
[ 0.820418] PCI: pci_cache_line_size set to 64 bytes
[ 0.820498] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.820500] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff
[ 0.820716] NET: Registered protocol family 8
[ 0.820743] NET: Registered protocol family 20
[ 0.820829] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.820859] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.820994] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.830075] Switching to clocksource tsc
[ 0.830110] pnp: PnP ACPI init
[ 0.830158] ACPI: bus type pnp registered
[ 0.832694] pnp: PnP ACPI: found 13 devices
[ 0.832725] ACPI: ACPI bus type pnp unregistered
[ 0.832756] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.832784] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.832811] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.832839] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.832866] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.832896] system 00:09: [io 0x0400-0x04bf] could not be reserved
[ 0.832925] system 00:0a: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.832954] system 00:0b: [mem 0x000d5000-0x000d7fff] has been reserved
[ 0.832982] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.833009] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.833037] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.833065] system 00:0b: [mem 0xcfee0000-0xcfefffff] could not be reserved
[ 0.833093] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.833121] system 00:0b: [mem 0x00100000-0xcfedffff] could not be reserved
[ 0.833149] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.833177] system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.833204] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.833232] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.833260] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.833287] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.833315] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
[ 0.838580] pci 0000:00:1c.0: BAR 8: assigned [mem 0xe8500000-0xe86fffff]
[ 0.838609] pci 0000:00:1c.0: BAR 9: assigned [mem 0xe8700000-0xe88fffff
64bit pref]
[ 0.838640] pci 0000:00:1c.3: BAR 9: assigned [mem 0xe8900000-0xe8afffff
64bit pref]
[ 0.838671] pci 0000:01:00.0: BAR 6: assigned [mem 0xe4000000-0xe401ffff
pref]
[ 0.838702] pci 0000:00:06.0: PCI bridge to [bus 01-01]
[ 0.838729] pci 0000:00:06.0: bridge window [io 0xa000-0xafff]
[ 0.838757] pci 0000:00:06.0: bridge window [mem 0xe4000000-0xe5ffffff]
[ 0.838785] pci 0000:00:06.0: bridge window [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.838817] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.838844] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.838873] pci 0000:00:1c.0: bridge window [mem 0xe8500000-0xe86fffff]
[ 0.838902] pci 0000:00:1c.0: bridge window [mem 0xe8700000-0xe88fffff
64bit pref]
[ 0.838935] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.838963] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 0.838992] pci 0000:00:1c.3: bridge window [mem 0xe8100000-0xe81fffff]
[ 0.839020] pci 0000:00:1c.3: bridge window [mem 0xe8900000-0xe8afffff
64bit pref]
[ 0.839054] pci 0000:04:00.0: BAR 6: assigned [mem 0xe8020000-0xe802ffff
pref]
[ 0.839084] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.839112] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.839141] pci 0000:00:1c.4: bridge window [mem 0xe6000000-0xe6ffffff]
[ 0.839170] pci 0000:00:1c.4: bridge window [mem 0xe8000000-0xe80fffff
64bit pref]
[ 0.839203] pci 0000:05:00.0: BAR 6: assigned [mem 0xe8220000-0xe822ffff
pref]
[ 0.839233] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 0.839261] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.839290] pci 0000:00:1c.5: bridge window [mem 0xe7000000-0xe7ffffff]
[ 0.839318] pci 0000:00:1c.5: bridge window [mem 0xe8200000-0xe82fffff
64bit pref]
[ 0.839352] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.839378] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.839407] pci 0000:00:1e.0: bridge window [mem 0xe8300000-0xe83fffff]
[ 0.839436] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.839471] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.839499] pci 0000:00:06.0: setting latency timer to 64
[ 0.839505] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.839533] pci 0000:00:1c.0: setting latency timer to 64
[ 0.839540] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.839569] pci 0000:00:1c.3: setting latency timer to 64
[ 0.839574] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.839603] pci 0000:00:1c.4: setting latency timer to 64
[ 0.839609] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.839637] pci 0000:00:1c.5: setting latency timer to 64
[ 0.839642] pci 0000:00:1e.0: setting latency timer to 64
[ 0.839644] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.839646] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.839647] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.839648] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.839650] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.839652] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.839653] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe5ffffff]
[ 0.839654] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit
pref]
[ 0.839656] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.839657] pci_bus 0000:02: resource 1 [mem 0xe8500000-0xe86fffff]
[ 0.839659] pci_bus 0000:02: resource 2 [mem 0xe8700000-0xe88fffff 64bit
pref]
[ 0.839660] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.839662] pci_bus 0000:03: resource 1 [mem 0xe8100000-0xe81fffff]
[ 0.839663] pci_bus 0000:03: resource 2 [mem 0xe8900000-0xe8afffff 64bit
pref]
[ 0.839665] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.839666] pci_bus 0000:04: resource 1 [mem 0xe6000000-0xe6ffffff]
[ 0.839668] pci_bus 0000:04: resource 2 [mem 0xe8000000-0xe80fffff 64bit
pref]
[ 0.839669] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.839671] pci_bus 0000:05: resource 1 [mem 0xe7000000-0xe7ffffff]
[ 0.839672] pci_bus 0000:05: resource 2 [mem 0xe8200000-0xe82fffff 64bit
pref]
[ 0.839674] pci_bus 0000:06: resource 1 [mem 0xe8300000-0xe83fffff]
[ 0.839675] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.839677] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.839678] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.839679] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.839681] pci_bus 0000:06: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.839693] NET: Registered protocol family 2
[ 0.839739] IP route cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.839902] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 0.840653] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.840883] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.840910] TCP reno registered
[ 0.840937] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.840980] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.841074] NET: Registered protocol family 1
[ 0.841283] RPC: Registered udp transport module.
[ 0.841310] RPC: Registered tcp transport module.
[ 0.841337] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.841510] pci 0000:01:00.0: Boot video device
[ 0.841524] PCI: CLS 32 bytes, default 64
[ 0.841558] Trying to unpack rootfs image as initramfs...
[ 0.872351] Freeing initrd memory: 2256k freed
[ 0.872677] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.872705] Placing 64MB software IO TLB between ffff880005e00000 -
ffff880009e00000
[ 0.872735] software IO TLB at phys 0x5e00000 - 0x9e00000
[ 0.875298] microcode: CPU0 sig=0x10677, pf=0x10, revision=0x703
[ 0.875335] microcode: CPU1 sig=0x10677, pf=0x10, revision=0x703
[ 0.875374] microcode: CPU2 sig=0x10677, pf=0x10, revision=0x703
[ 0.875417] microcode: CPU3 sig=0x10677, pf=0x10, revision=0x703
[ 0.875499] microcode: Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.875696] Intel AES-NI instructions are not detected.
[ 0.876235] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.879768] VFS: Disk quotas dquot_6.5.2
[ 0.879870] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.881027] NTFS driver 2.1.29 [Flags: R/W].
[ 0.881197] fuse init (API version 7.14)
[ 0.881486] msgmni has been set to 7912
[ 0.881687] alg: No test for cipher_null (cipher_null-generic)
[ 0.881774] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 0.881859] alg: No test for digest_null (digest_null-generic)
[ 0.881933] alg: No test for compress_null (compress_null-generic)
[ 0.883126] alg: No test for fcrypt (fcrypt-generic)
[ 0.885078] alg: No test for stdrng (krng)
[ 0.887111] async_tx: api initialized (async)
[ 0.887268] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.887304] io scheduler noop registered
[ 0.887403] io scheduler cfq registered (default)
[ 0.887544] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.887562] pcieport 0000:00:06.0: irq 40 for MSI/MSI-X
[ 0.887701] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.887727] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.887926] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.887951] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.888143] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.888168] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.888375] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.888400] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 0.888761] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.889002] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.889034] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.889665] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.889696] ACPI: Power Button [PWRB]
[ 0.889805] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.889840] ACPI: Power Button [PWRF]
[ 0.890281] ACPI: acpi_idle registered with cpuidle
[ 0.896713] Non-volatile memory driver v1.3
[ 0.896800] Linux agpgart interface v0.103
[ 0.896918] ipmi message handler version 39.2
[ 0.896951] ipmi device interface
[ 0.897083] IPMI System Interface driver.
[ 0.897229] ipmi_si: Adding default-specified kcs state machine
[ 0.897279] ipmi_si: Trying default-specified kcs state machine at i/o
address 0xca2, slave address 0x0, irq 0
[ 0.897312] ipmi_si: Interface detection failed
[ 0.909981] ipmi_si: Adding default-specified smic state machine
[ 0.910033] ipmi_si: Trying default-specified smic state machine at i/o
address 0xca9, slave address 0x0, irq 0
[ 0.910069] ipmi_si: Interface detection failed
[ 0.923316] ipmi_si: Adding default-specified bt state machine
[ 0.923368] ipmi_si: Trying default-specified bt state machine at i/o
address 0xe4, slave address 0x0, irq 0
[ 0.923405] ipmi_si: Interface detection failed
[ 0.936708] ipmi_si: Unable to find any System Interface(s)
[ 0.936739] IPMI Watchdog: driver initialized
[ 0.936766] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via
sys_reboot.
[ 0.936801] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds,
margin is 60 seconds).
[ 0.936848] Hangcheck: Using getrawmonotonic().
[ 0.936945] [drm] Initialized drm 1.1.0 20060810
[ 0.937025] [drm] radeon defaulting to kernel modesetting.
[ 0.937057] [drm] radeon kernel modesetting enabled.
[ 0.937108] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.937138] radeon 0000:01:00.0: setting latency timer to 64
[ 0.938422] [drm] initializing kernel modesetting (CYPRESS 0x1002:0x6898).
[ 0.938617] [drm] register mmio base: 0xE5000000
[ 0.938648] [drm] register mmio size: 131072
[ 0.939001] ATOM BIOS: CYPRESS
[ 0.939037] [drm] Clocks initialized !
[ 0.939066] radeon 0000:01:00.0: VRAM: 1024M 0x00000000 - 0x3FFFFFFF (1024M
used)
[ 0.939097] radeon 0000:01:00.0: GTT: 512M 0x40000000 - 0x5FFFFFFF
[ 0.939135] mtrr: type mismatch for d0000000,10000000 old: write-back new:
write-combining
[ 0.939166] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 0.939192] [drm] RAM width 256bits DDR
[ 0.939270] [TTM] Zone kernel: Available graphics memory: 2025570 kiB.
[ 0.939298] [TTM] Initializing pool allocator.
[ 0.939334] [drm] radeon: 1024M of VRAM memory ready
[ 0.939361] [drm] radeon: 512M of GTT memory ready.
[ 0.939411] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 0.939415] [drm] radeon: using MSI.
[ 0.939462] [drm] radeon: irq initialized.
[ 0.939489] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 0.940129] [drm] Loading CYPRESS Microcode
[ 61.066755] r600_cp: Failed to load firmware "radeon/CYPRESS_pfp.bin"
[ 61.066788] [drm:evergreen_startup] *ERROR* Failed to load firmware!
[ 61.066817] radeon 0000:01:00.0: disabling GPU acceleration
[ 61.067883] radeon 0000:01:00.0: ffff88012e893200 unpin not necessary
[ 61.067911] radeon 0000:01:00.0: ffff88012e893200 unpin not necessary
[ 61.068610] [drm] Unknown TV standard; defaulting to NTSC
[ 61.068809] [drm] Unknown TV standard; defaulting to NTSC
[ 61.068841] [drm] Radeon Display Connectors
[ 61.068867] [drm] Connector 0:
[ 61.068893] [drm] DisplayPort
[ 61.068918] [drm] HPD4
[ 61.068944] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c
0x643c
[ 61.068974] [drm] Encoders:
[ 61.068999] [drm] DFP1: INTERNAL_UNIPHY2
[ 61.069025] [drm] Connector 1:
[ 61.069051] [drm] HDMI-A
[ 61.069076] [drm] HPD5
[ 61.069101] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c
0x646c
[ 61.069131] [drm] Encoders:
[ 61.069156] [drm] DFP2: INTERNAL_UNIPHY2
[ 61.069182] [drm] Connector 2:
[ 61.069208] [drm] DVI-I
[ 61.069233] [drm] HPD1
[ 61.069259] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c
0x645c
[ 61.069288] [drm] Encoders:
[ 61.069314] [drm] DFP3: INTERNAL_UNIPHY1
[ 61.069340] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 61.069366] [drm] Connector 3:
[ 61.069391] [drm] DVI-I
[ 61.069416] [drm] HPD6
[ 61.069442] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c
0x647c
[ 61.069471] [drm] Encoders:
[ 61.069497] [drm] DFP4: INTERNAL_UNIPHY
[ 61.069523] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 61.202445] [drm] Internal thermal controller with fan control
[ 61.202476] [drm] radeon: power management initialized
[ 61.274461] [drm] fb mappable at 0xD0040000
[ 61.274487] [drm] vram apper at 0xD0000000
[ 61.274513] [drm] size 9216000
[ 61.274539] [drm] fb depth is 24
[ 61.274564] [drm] pitch is 7680
[ 61.484811] Console: switching to colour frame buffer device 240x75
[ 61.488696] fb0: radeondrmfb frame buffer device
[ 61.488697] drm: registered panic notifier
[ 61.488699] Slow work thread pool: Starting up
[ 61.488750] Slow work thread pool: Ready
[ 61.488753] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on
minor 0
[ 61.488812] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 61.488920] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 61.489448] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 64.500002] floppy0: no floppy controllers found
[ 64.502230] brd: module loaded
[ 64.503296] loop: module loaded
[ 64.503517] nbd: registered device at major 43
[ 64.505924] Loading iSCSI transport class v2.0-870.
[ 64.506607] ahci 0000:00:1f.2: version 3.0
[ 64.506617] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 64.506660] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 64.506690] ahci: SSS flag set, parallel bus scan disabled
[ 64.506733] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f
impl SATA mode
[ 64.506759] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio
slum part ccc ems
[ 64.506787] ahci 0000:00:1f.2: setting latency timer to 64
[ 64.540024] scsi0 : ahci
[ 64.540135] scsi1 : ahci
[ 64.540308] scsi2 : ahci
[ 64.540474] scsi3 : ahci
[ 64.540639] scsi4 : ahci
[ 64.540812] scsi5 : ahci
[ 64.541022] ata1: SATA max UDMA/133 abar m2048@0xe8406000 port 0xe8406100
irq 45
[ 64.541047] ata2: SATA max UDMA/133 abar m2048@0xe8406000 port 0xe8406180
irq 45
[ 64.541070] ata3: SATA max UDMA/133 abar m2048@0xe8406000 port 0xe8406200
irq 45
[ 64.541093] ata4: SATA max UDMA/133 abar m2048@0xe8406000 port 0xe8406280
irq 45
[ 64.541116] ata5: SATA max UDMA/133 abar m2048@0xe8406000 port 0xe8406300
irq 45
[ 64.541139] ata6: SATA max UDMA/133 abar m2048@0xe8406000 port 0xe8406380
irq 45
[ 64.541192] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 64.541319] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3
impl SATA mode
[ 64.541345] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 64.541370] ahci 0000:03:00.0: setting latency timer to 64
[ 64.541473] scsi6 : ahci
[ 64.541642] scsi7 : ahci
[ 64.541809] ata7: SATA max UDMA/133 abar m8192@0xe8100000 port 0xe8100100
irq 19
[ 64.541833] ata8: SATA max UDMA/133 abar m8192@0xe8100000 port 0xe8100180
irq 19
[ 64.541949] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) ->
IRQ 16
[ 64.541988] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 64.542048] scsi8 : pata_jmicron
[ 64.542222] scsi9 : pata_jmicron
[ 64.542805] ata9: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq
16
[ 64.542828] ata10: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq
16
[ 64.542971] bonding: Ethernet Channel Bonding Driver: v3.6.0 (September 26,
2009)
[ 64.543003] bonding: Warning: either miimon or arp_interval and
arp_ip_target module parameters must be specified, otherwise bonding will not
detect link failures! see bonding.txt for details.
[ 64.543684] Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller
(davem@redhat.com)
[ 64.543845] tun: Universal TUN/TAP device driver, 1.6
[ 64.543862] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 64.543948] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 64.543974] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 64.544017] r8169 0000:04:00.0: setting latency timer to 64
[ 64.544057] r8169 0000:04:00.0: irq 46 for MSI/MSI-X
[ 64.544209] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xffffc9000004a000,
00:1d:7d:0c:03:29, XID 1c4000c0 IRQ 46
[ 64.547514] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 64.548351] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 64.549219] r8169 0000:05:00.0: setting latency timer to 64
[ 64.549259] r8169 0000:05:00.0: irq 47 for MSI/MSI-X
[ 64.549411] r8169 0000:05:00.0: eth1: RTL8168c/8111c at 0xffffc90000050000,
00:1d:7d:0c:03:27, XID 1c4000c0 IRQ 47
[ 64.553972] aoe: AoE v47 initialised.
[ 64.554876] usbmon: debugfs is not available
[ 64.555772] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 64.556710] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 64.557669] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 64.557672] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 64.558626] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[ 64.563475] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 64.563484] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8405000
[ 64.576667] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 64.577718] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 64.578714] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 64.579723] usb usb1: Product: EHCI Host Controller
[ 64.580754] usb usb1: Manufacturer: Linux 2.6.35.1 ehci_hcd
[ 64.581792] usb usb1: SerialNumber: 0000:00:1a.7
[ 64.582973] hub 1-0:1.0: USB hub found
[ 64.584041] hub 1-0:1.0: 6 ports detected
[ 64.585201] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 64.586285] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 64.586287] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 64.587395] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 64.592410] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 64.592419] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe8404000
[ 64.606667] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 64.607856] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 64.608999] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 64.610143] usb usb2: Product: EHCI Host Controller
[ 64.611292] usb usb2: Manufacturer: Linux 2.6.35.1 ehci_hcd
[ 64.612423] usb usb2: SerialNumber: 0000:00:1d.7
[ 64.613694] hub 2-0:1.0: USB hub found
[ 64.614856] hub 2-0:1.0: 6 ports detected
[ 64.616119] uhci_hcd: USB Universal Host Controller Interface driver
[ 64.617280] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 64.618423] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 64.618425] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 64.619553] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 64.620718] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[ 64.621875] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 64.623011] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 64.624171] usb usb3: Product: UHCI Host Controller
[ 64.625312] usb usb3: Manufacturer: Linux 2.6.35.1 uhci_hcd
[ 64.626446] usb usb3: SerialNumber: 0000:00:1a.0
[ 64.627732] hub 3-0:1.0: USB hub found
[ 64.628854] hub 3-0:1.0: 2 ports detected
[ 64.630050] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ
21
[ 64.631183] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 64.631185] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 64.632303] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[ 64.633463] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
[ 64.634643] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 64.635796] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 64.636964] usb usb4: Product: UHCI Host Controller
[ 64.638135] usb usb4: Manufacturer: Linux 2.6.35.1 uhci_hcd
[ 64.639299] usb usb4: SerialNumber: 0000:00:1a.1
[ 64.640618] hub 4-0:1.0: USB hub found
[ 64.641807] hub 4-0:1.0: 2 ports detected
[ 64.643070] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 64.644300] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 64.644302] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 64.645498] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
number 5
[ 64.646714] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e200
[ 64.647943] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 64.649130] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 64.650334] usb usb5: Product: UHCI Host Controller
[ 64.651541] usb usb5: Manufacturer: Linux 2.6.35.1 uhci_hcd
[ 64.652739] usb usb5: SerialNumber: 0000:00:1a.2
[ 64.654078] hub 5-0:1.0: USB hub found
[ 64.655270] hub 5-0:1.0: 2 ports detected
[ 64.656538] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 64.657760] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 64.657763] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 64.658951] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 6
[ 64.660157] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 64.661347] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 64.662470] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 64.663588] usb usb6: Product: UHCI Host Controller
[ 64.664720] usb usb6: Manufacturer: Linux 2.6.35.1 uhci_hcd
[ 64.665830] usb usb6: SerialNumber: 0000:00:1d.0
[ 64.667068] hub 6-0:1.0: USB hub found
[ 64.668181] hub 6-0:1.0: 2 ports detected
[ 64.669331] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 64.670432] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 64.670434] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 64.671513] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 7
[ 64.672589] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 64.673673] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 64.674751] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 64.675808] usb usb7: Product: UHCI Host Controller
[ 64.676865] usb usb7: Manufacturer: Linux 2.6.35.1 uhci_hcd
[ 64.677935] usb usb7: SerialNumber: 0000:00:1d.1
[ 64.679114] hub 7-0:1.0: USB hub found
[ 64.680172] hub 7-0:1.0: 2 ports detected
[ 64.681312] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 64.682367] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 64.682370] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 64.683426] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 8
[ 64.684516] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[ 64.685587] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 64.686642] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 64.687733] usb usb8: Product: UHCI Host Controller
[ 64.688786] usb usb8: Manufacturer: Linux 2.6.35.1 uhci_hcd
[ 64.689840] usb usb8: SerialNumber: 0000:00:1d.2
[ 64.691039] hub 8-0:1.0: USB hub found
[ 64.692091] hub 8-0:1.0: 2 ports detected
[ 64.693270] Initializing USB Mass Storage driver...
[ 64.694406] usbcore: registered new interface driver usb-storage
[ 64.695460] USB Mass Storage support registered.
[ 64.696736] PNP: No PS/2 controller found. Probing ports directly.
[ 64.698241] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 64.699364] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 64.700602] mice: PS/2 mouse device common for all mice
[ 64.701833] rtc_cmos 00:04: RTC can wake from S4
[ 64.702942] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 64.704026] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 64.705129] i2c /dev entries driver
[ 64.706526] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 64.707750] Driver for 1-wire Dallas network protocol.
[ 64.709040] usbcore: registered new interface driver DS9490R
[ 64.710122] 1-Wire driver for the DS2760 battery monitor chip - (c)
2004-2005, Szabolcs Gyurko
[ 64.711213] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 64.712425] iTCO_wdt: unable to reset NO_REBOOT flag, platform may have
disabled it
[ 64.713546] md: linear personality registered for level -1
[ 64.714661] md: raid0 personality registered for level 0
[ 64.715767] md: raid1 personality registered for level 1
[ 64.716864] md: raid6 personality registered for level 6
[ 64.717956] md: raid5 personality registered for level 5
[ 64.719029] md: raid4 personality registered for level 4
[ 64.720274] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised:
dm-devel@redhat.com
[ 64.721528] EDAC MC: Ver: 2.1.0 Aug 12 2010
[ 64.723003] EDAC MC0: Giving out device to 'x38_edac' 'x38': DEV
0000:00:00.0
[ 64.724145] cpuidle: using governor ladder
[ 64.725242] No iBFT detected.
[ 64.726320] HIFN supports only 32-bit addresses.
[ 64.727423] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 64.729822] usbcore: registered new interface driver hiddev
[ 64.730985] usbcore: registered new interface driver usbhid
[ 64.732078] usbhid: USB HID core driver
[ 64.733375] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 64.734469] hda_intel: position_fix set to 1 for device 1458:a022
[ 64.735592] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 64.735610] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 64.770748] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 64.771883] HDA Intel 0000:01:00.1: irq 49 for MSI/MSI-X
[ 64.771897] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 64.784283] ALSA device list:
[ 64.785387] #0: HDA Intel at 0xe8400000 irq 48
[ 64.786483] #1: HD-Audio Generic at 0xe5020000 irq 49
[ 64.787623] pktgen 2.73: Packet Generator for packet performance testing.
[ 64.788928] GACT probability on
[ 64.790051] Mirror/redirect action on
[ 64.791157] Simple TC action Loaded
[ 64.792388] netem: version 1.2
[ 64.793487] u32 classifier
[ 64.794573] Performance counters on
[ 64.795660] input device check on
[ 64.796742] Actions configured
[ 64.797814] Netfilter messages via NETLINK v0.30.
[ 64.798908] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 64.800138] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please
use
[ 64.801232] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module
option or
[ 64.802345] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 64.803463] ctnetlink v0.93: registering with nfnetlink.
[ 64.804594] xt_time: kernel timezone is -0000
[ 64.805705] IPVS: Registered protocols (TCP, UDP, AH, ESP)
[ 64.806821] IPVS: Connection hash table configured (size=4096,
memory=64Kbytes)
[ 64.807955] IPVS: ipvs loaded.
[ 64.809055] IPVS: [rr] scheduler registered.
[ 64.810158] IPVS: [wrr] scheduler registered.
[ 64.811268] IPVS: [lc] scheduler registered.
[ 64.812356] IPVS: [wlc] scheduler registered.
[ 64.813451] IPVS: [lblc] scheduler registered.
[ 64.814547] IPVS: [lblcr] scheduler registered.
[ 64.815634] IPVS: [dh] scheduler registered.
[ 64.816728] IPVS: [sh] scheduler registered.
[ 64.817794] IPVS: [sed] scheduler registered.
[ 64.818860] IPVS: [nq] scheduler registered.
[ 64.819911] IPVS: ftp: loaded support on port[0] = 21
[ 64.820980] IPv4 over IPv4 tunneling driver
[ 64.822149] GRE over IPv4 tunneling driver
[ 64.823361] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 64.824441] arp_tables: (C) 2002 David S. Miller
[ 64.825510] TCP bic registered
[ 64.826557] TCP cubic registered
[ 64.827614] TCP westwood registered
[ 64.828659] TCP htcp registered
[ 64.829684] Initializing XFRM netlink socket
[ 64.830949] NET: Registered protocol family 10
[ 64.832122] lo: Disabled Privacy Extensions
[ 64.833336] tunl0: Disabled Privacy Extensions
[ 64.834430] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 64.835493] IPv6 over IPv4 tunneling driver
[ 64.836642] sit0: Disabled Privacy Extensions
[ 64.837816] ip6tnl0: Disabled Privacy Extensions
[ 64.838857] NET: Registered protocol family 17
[ 64.839865] NET: Registered protocol family 15
[ 64.840881] Bridge firewalling registered
[ 64.841884] Ebtables v2.0 registered
[ 64.842884] lec:lane_module_init: lec.c: Aug 12 2010 18:07:34 initialized
[ 64.843877] mpoa:atm_mpoa_init: mpc.c: Aug 12 2010 18:07:33 initialized
[ 64.844863] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 64.845833] All bugs added by David S. Miller <davem@redhat.com>
[ 64.847800] rtc_cmos 00:04: setting system clock to 2010-08-12 18:12:56 UTC
(1281636776)
[ 64.848814] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 64.849818] EDD information not available.
[ 64.861290] ata7: SATA link down (SStatus 0 SControl 300)
[ 65.020836] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 65.021265] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 65.021436] ata8.00: ATAPI: PIONEER DVR-213NP, 1.01, max UDMA/66
[ 65.021778] ata8.00: configured for UDMA/66
[ 65.026824] ata1.00: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133
[ 65.028092] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32),
AA
[ 65.030376] ata1.00: configured for UDMA/133
[ 65.044666] scsi 0:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0
PQ: 0 ANSI: 5
[ 65.046154] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 65.046169] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 65.048798] sd 0:0:0:0: [sda] Write Protect is off
[ 65.050077] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 65.050096] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 65.051522] sda: sda1 sda2
[ 65.065086] sd 0:0:0:0: [sda] Attached SCSI disk
[ 65.927503] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 65.929179] ata2.00: ATA-7: WDC WD800JD-00LSA0, 06.01D06, max UDMA/133
[ 65.930471] ata2.00: 156301488 sectors, multi 0: LBA48
[ 65.932230] ata2.00: configured for UDMA/133
[ 65.947972] scsi 1:0:0:0: Direct-Access ATA WDC WD800JD-00LS 06.0
PQ: 0 ANSI: 5
[ 65.949421] sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0
GB/74.5 GiB)
[ 65.949488] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 65.952096] sd 1:0:0:0: [sdb] Write Protect is off
[ 65.953407] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 65.953425] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 65.954879] sdb: sdb1 sdb2 sdb3 sdb4
[ 65.966379] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 66.267504] ata3: SATA link down (SStatus 0 SControl 300)
[ 66.600421] ata4: SATA link down (SStatus 0 SControl 300)
[ 66.933754] ata5: SATA link down (SStatus 0 SControl 300)
[ 67.267504] ata6: SATA link down (SStatus 0 SControl 300)
[ 67.281237] scsi 7:0:0:0: CD-ROM PIONEER DVR-213NP 1.01
PQ: 0 ANSI: 5
[ 67.285382] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 67.286701] Uniform CD-ROM driver Revision: 3.20
[ 67.288133] sr 7:0:0:0: Attached scsi CD-ROM sr0
[ 67.288207] sr 7:0:0:0: Attached scsi generic sg2 type 5
[ 67.452269] Freeing unused kernel memory: 496k freed
[ 67.982193] EXT3-fs: barriers not enabled
[ 67.990951] kjournald starting. Commit interval 5 seconds
[ 67.990962] EXT3-fs (sdb2): mounted filesystem with writeback data mode
[ 69.694707] udev: starting version 160
[ 73.133703] Adding 899636k swap on /dev/sdb4. Priority:-1 extents:1
across:899636k
[ 73.316217] EXT3-fs (sdb2): using internal journal
[ 73.955459] EXT3-fs: barriers not enabled
[ 73.959605] kjournald starting. Commit interval 5 seconds
[ 73.959730] EXT3-fs (sdb1): using internal journal
[ 73.959733] EXT3-fs (sdb1): mounted filesystem with writeback data mode
[ 73.978244] EXT3-fs: barriers not enabled
[ 73.982272] kjournald starting. Commit interval 5 seconds
[ 73.986120] EXT3-fs (sdb3): using internal journal
[ 73.989914] EXT3-fs (sdb3): mounted filesystem with writeback data mode
[ 76.246523] r8169 0000:04:00.0: eth0: link up
[ 76.246660] r8169 0000:04:00.0: eth0: link up
[ 82.128945] tun0: Disabled Privacy Extensions
[ 86.964578] eth0: no IPv6 routers present
--
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
------------------------------------------------------------------------------
This SF.net email is sponsored by
Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev
--
next reply other threads:[~2010-08-12 9:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-12 9:16 bugzilla-daemon [this message]
2010-08-12 12:37 ` [Bug 16569] r600_cp: Failed to load firmware "radeon/CYPRESS_pfp.bin" bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-16569-2300@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=dri-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.