From mboxrd@z Thu Jan 1 00:00:00 1970 From: bugzilla-daemon@bugzilla.kernel.org Subject: [Bug 17692] New: Intermittent failure to resume from suspend-to-ram in radeon_resume Date: Thu, 2 Sep 2010 23:46:13 GMT Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dri-devel-bounces@lists.sourceforge.net To: dri-devel@lists.sourceforge.net List-Id: dri-devel@lists.freedesktop.org https://bugzilla.kernel.org/show_bug.cgi?id=17692 Summary: Intermittent failure to resume from suspend-to-ram in radeon_resume Product: Drivers Version: 2.5 Kernel Version: 2.6.35.4 Platform: All OS/Version: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: Video(DRI - non Intel) AssignedTo: drivers_video-dri@kernel-bugs.osdl.org ReportedBy: bugs+kernel@karlt.net Regression: No TRACE_RESUMEs around this line indicate that it gets as far as radeon_resume, but not as far as radeon_pm_resume: http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=blob;f=drivers/gpu/drm/radeon/radeon_device.c;h=a7184636dcb494b36d470af30c2b513382d38019;hb=1506707a6c740db316e422239a53ae5df1727591#l798 Adding additional TRACE_RESUMEs earlier in radeon_resume_kms (and using them) seems to make failure less frequent, as if there is a timing issue involved. Possibly interesting messages on startup: [drm] initializing kernel modesetting (RV515 0x1002:0x7145). ATOM BIOS: M54CSP/M52CSP [drm] Loading R500 Microcode [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0 and during successful resume: radeon 0000:01:00.0: power state changed by ACPI to D0 radeon 0000:01:00.0: power state changed by ACPI to D0 radeon 0000:01:00.0: setting latency timer to 64 radeon 0000:01:00.0: ffff8800bfba5e00 unpin not necessary [drm] radeon: 1 quad pipes, 1 z pipes initialized. [drm] PCIE GART of 512M enabled (table at 0x00040000). [drm] radeon: ring at 0x0000000008000000 [drm] ring test succeeded in 2 usecs [drm] ib test succeeded in 0 usecs ata1: EH complete [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting [drm:atom_execute_table_locked] *ERROR* atombios stuck executing EC38 (len 86, WS 4, PS 0) @ 0xEC6B PM: resume of devices complete after 1660.086 msecs http://bugs.freedesktop.org/show_bug.cgi?id=27744 I have radeon.dynclks=1 on the command line. I had intermittent resume failures even without this, though I haven't confirmed that the failure is at the same point. -- Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug. ------------------------------------------------------------------------------ This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd --