From mboxrd@z Thu Jan 1 00:00:00 1970
From: bugzilla-daemon@bugzilla.kernel.org
Subject: [Bug 179341] mpt3sas: LSISAS3008 don't see Intel 540s SSD
Date: Wed, 23 Nov 2016 06:09:59 +0000
Message-ID:
References:
Mime-Version: 1.0
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 7bit
Return-path:
Received: from mail.kernel.org ([198.145.29.136]:42504 "EHLO mail.kernel.org"
rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP
id S1750945AbcKWGKJ (ORCPT );
Wed, 23 Nov 2016 01:10:09 -0500
Received: from mail.kernel.org (localhost [127.0.0.1])
by mail.kernel.org (Postfix) with ESMTP id 22A5220173
for ; Wed, 23 Nov 2016 06:10:02 +0000 (UTC)
Received: from bugzilla1.web.kernel.org (bugzilla1.web.kernel.org [172.20.200.51])
by mail.kernel.org (Postfix) with ESMTP id D9E2A20374
for ; Wed, 23 Nov 2016 06:09:59 +0000 (UTC)
In-Reply-To:
Sender: linux-scsi-owner@vger.kernel.org
List-Id: linux-scsi@vger.kernel.org
To: linux-scsi@vger.kernel.org
https://bugzilla.kernel.org/show_bug.cgi?id=179341
--- Comment #8 from Chaitra P B ---
(In reply to Badalyan Vyacheslav from comment #7)
> Help is needed. How to get a log FW?
>
> This is "SAS 9300-16i Host Bus Adapter" and not have any HW RAID.
>
> [root@nas sas3ircu_linux_x64_rel]# ./sas3ircu 0 LOGIR
> Avago Technologies SAS3 IR Configuration Utility.
> Version 14.00.00.00 (2016.07.21)
> Copyright (c) 2009-2016 Avago Technologies. All rights reserved.
>
> SAS3IRCU: The LOGIR command is not supported by the firmware currently
> loaded on controller 0.
>
> [root@nas sas3ircu_linux_x64_rel]# ./sas3ircu list
> Avago Technologies SAS3 IR Configuration Utility.
> Version 14.00.00.00 (2016.07.21)
> Copyright (c) 2009-2016 Avago Technologies. All rights reserved.
>
>
> Adapter Vendor Device SubSys SubSys
> Index Type ID ID Pci Address Ven ID Dev ID
> ----- ------------ ------ ------ ----------------- ------ ------
> 0 SAS3008 1000h 97h 00h:0ah:00h:00h 1000h 3130h
>
> Adapter Vendor Device SubSys SubSys
> Index Type ID ID Pci Address Ven ID Dev ID
> ----- ------------ ------ ------ ----------------- ------ ------
> 1 SAS3008 1000h 97h 00h:08h:00h:00h 1000h 3130h
> SAS3IRCU: Utility Completed Successfully.
Badalyan,
Connect UART to controller, then open Teraterm window & use below commands:
"iop show diag" -> outputs ring buffer and trace buffer.
"pl dbg" -> outputs other debug info.
--
You are receiving this mail because:
You are watching someone on the CC list of the bug.