All of lore.kernel.org
 help / color / mirror / Atom feed
From: bugzilla-daemon@bugzilla.kernel.org
To: dri-devel@lists.freedesktop.org
Subject: [Bug 196117] amdgpu - RX 480 (polaris) - freeze during boot
Date: Thu, 22 Jun 2017 23:22:40 +0000	[thread overview]
Message-ID: <bug-196117-2300-1NssgPfhH8@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-196117-2300@https.bugzilla.kernel.org/>

https://bugzilla.kernel.org/show_bug.cgi?id=196117

--- Comment #5 from Paul K. Gerke (paulkgerke@craftware.nl) ---
I finally found some time to test some other kernel versions. Instead of the
suggested 4.10.5 kernel from the link posted above, I tried kernel 4.10.0-rc5+.
The errors are *different*:

[  129.738315] [drm] amdgpu kernel modesetting enabled.
[  129.742693] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[  129.742700] AMD IOMMUv2 functionality not available on this system
[  129.747127] CRAT table not found
[  129.747134] Finished initializing topology ret=0
[  129.747154] kfd kfd: Initialized module
[  129.747288] checking generic (c0000000 760000) vs hw (c0000000 10000000)
[  129.747289] fb: switching to amdgpudrmfb from VESA VGA
[  129.747339] Console: switching to colour dummy device 80x25
[  129.747619] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF
0x1043:0x0505 0xC7).
[  129.747629] [drm] register mmio base: 0xDFFC0000
[  129.747630] [drm] register mmio size: 262144
[  129.747635] [drm] doorbell mmio base: 0xDEA00000
[  129.747636] [drm] doorbell mmio size: 2097152
[  129.747647] [drm] probing gen 2 caps for device 10de:778 = 313d02/0
[  129.747652] [drm] probing mlw for device 10de:778 = 313d02
[  129.747660] [drm] UVD is enabled in VM mode
[  129.747662] [drm] VCE enabled in VM mode
[  129.769609] [drm] BIOS signature incorrect 1 1
[  129.769615] amdgpu 0000:02:00.0: Invalid PCI ROM header signature: expecting
0xaa55, got 0x0000
[  129.770226] ATOM BIOS: 67DFHB.15.50.0.0.AS18
[  129.770236] [drm] GPU post is not needed
[  129.771291] amdgpu 0000:02:00.0: VRAM: 8192M 0x0000000000000000 -
0x00000001FFFFFFFF (8192M used)
[  129.771295] amdgpu 0000:02:00.0: GTT: 8192M 0x0000000200000000 -
0x00000003FFFFFFFF
[  129.771299] [drm] Detected VRAM RAM=8192M, BAR=256M
[  129.771301] [drm] RAM width 256bits GDDR5
[  129.772340] [TTM] Zone  kernel: Available graphics memory: 8214568 kiB
[  129.772343] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[  129.772346] [TTM] Initializing pool allocator
[  129.772370] [TTM] Initializing DMA pool allocator
[  129.772424] [drm] amdgpu: 8192M of VRAM memory ready
[  129.772427] [drm] amdgpu: 8192M of GTT memory ready.
[  129.772444] [drm] GART: num cpu pages 2097152, num gpu pages 2097152
[  129.773652] [drm] PCIE GART of 8192M enabled (table at 0x0000000000040000).
[  129.773667] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[  129.773669] [drm] Driver supports precise vblank timestamp query.
[  129.773721] amdgpu 0000:02:00.0: amdgpu: using MSI.
[  129.773750] [drm] amdgpu: irq initialized.
[  129.773783] amdgpu: [powerplay] amdgpu: powerplay sw initialized
[  129.775082] [drm] AMDGPU Display Connectors
[  129.775087] [drm] Connector 0:
[  129.775090] [drm]   DP-1
[  129.775092] [drm]   HPD1
[  129.775095] [drm]   DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f
0x486f
[  129.775097] [drm]   Encoders:
[  129.775099] [drm]     DFP1: INTERNAL_UNIPHY1
[  129.775101] [drm] Connector 1:
[  129.775103] [drm]   DP-2
[  129.775104] [drm]   HPD5
[  129.775107] [drm]   DDC: 0x4874 0x4874 0x4875 0x4875 0x4876 0x4876 0x4877
0x4877
[  129.775108] [drm]   Encoders:
[  129.775110] [drm]     DFP2: INTERNAL_UNIPHY1
[  129.775112] [drm] Connector 2:
[  129.775113] [drm]   HDMI-A-1
[  129.775115] [drm]   HPD6
[  129.775117] [drm]   DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b
0x486b
[  129.775122] [drm]   Encoders:
[  129.775127] [drm]     DFP3: INTERNAL_UNIPHY2
[  129.775133] [drm] Connector 3:
[  129.775138] [drm]   HDMI-A-2
[  129.775143] [drm]   HPD4
[  129.775146] [drm]   DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873
0x4873
[  129.775148] [drm]   Encoders:
[  129.775149] [drm]     DFP4: INTERNAL_UNIPHY2
[  129.775151] [drm] Connector 4:
[  129.775152] [drm]   DVI-D-1
[  129.775154] [drm]   HPD3
[  129.775156] [drm]   DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f
0x487f
[  129.775157] [drm]   Encoders:
[  129.775159] [drm]     DFP5: INTERNAL_UNIPHY
[  129.775297] amdgpu 0000:02:00.0: fence driver on ring 0 use gpu addr
0x0000000200000008, cpu addr 0xffff9e78266d4008
[  129.775339] amdgpu 0000:02:00.0: fence driver on ring 1 use gpu addr
0x0000000200000018, cpu addr 0xffff9e78266d4018
[  129.775404] amdgpu 0000:02:00.0: fence driver on ring 2 use gpu addr
0x0000000200000028, cpu addr 0xffff9e78266d4028
[  129.775453] amdgpu 0000:02:00.0: fence driver on ring 3 use gpu addr
0x0000000200000038, cpu addr 0xffff9e78266d4038
[  129.775498] amdgpu 0000:02:00.0: fence driver on ring 4 use gpu addr
0x0000000200000048, cpu addr 0xffff9e78266d4048
[  129.775542] amdgpu 0000:02:00.0: fence driver on ring 5 use gpu addr
0x0000000200000058, cpu addr 0xffff9e78266d4058
[  129.775588] amdgpu 0000:02:00.0: fence driver on ring 6 use gpu addr
0x0000000200000068, cpu addr 0xffff9e78266d4068
[  129.775634] amdgpu 0000:02:00.0: fence driver on ring 7 use gpu addr
0x0000000200000078, cpu addr 0xffff9e78266d4078
[  129.775681] amdgpu 0000:02:00.0: fence driver on ring 8 use gpu addr
0x0000000200000088, cpu addr 0xffff9e78266d4088
[  129.775756] amdgpu 0000:02:00.0: fence driver on ring 9 use gpu addr
0x0000000200000098, cpu addr 0xffff9e78266d4098
[  129.775806] amdgpu 0000:02:00.0: fence driver on ring 10 use gpu addr
0x0000000200[  129.815268] amdgpu: [powerplay] [AVFS] Something is broken. See
log!
[  130.177622] amdgpu: [powerplay]
[  130.177622]  failed to send message 254 ret is 0
[  130.177657] amdgpu: [powerplay] Can't find requested voltage id in
vdd_dep_on_sclk table!
[  130.320889] amdgpu: [powerplay] DPM is already running
[  130.600945] clocksource: timekeeping watchdog on CPU3: Marking clocksource
'tsc' as unstable because the skew is too large:
[  130.600953] clocksource:                       'hpet' wd_now: c2a2cabc
wd_last: c1aae530 mask: ffffffff
[  130.600955] clocksource:                       'tsc' cs_now: 92d701459c
cs_last: 926c30c1b7 mask: ffffffffffffffff
[  133.961920] amdgpu: [powerplay] SMC address must be 4 byte aligned.
[  133.961938] clocksource: Switched to clocksource hpet
[  133.961947] amdgpu: [powerplay] Failed to initialize Graphics Level!
[  133.961953] amdgpu: [powerplay] Failed to initialize SMC table!
[  134.102010] amdgpu: [powerplay] Failed to enable VR hot GPIO interrupt!
[  134.662150] amdgpu: [powerplay] Failed to enable ULV!
[  134.802179] amdgpu: [powerplay] Attempt to enable Master Deep Sleep switch
failed!
[  134.802184] amdgpu: [powerplay] Failed to enable deep sleep master switch!

The main correspondence seems to be the part:

[  279.711657] amdgpu: [powerplay]
[  279.711657]  failed to send message 254 ret is 0

I will try some more debugging and correlate logs from different other
kernels... maybe I can shed some more light on this.

-- 
You are receiving this mail because:
You are watching the assignee of the bug.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2017-06-22 23:22 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-18 20:08 [Bug 196117] New: amdgpu RC 480 (polaris) freeze after initramfs, before kernel load bugzilla-daemon
2017-06-18 20:33 ` [Bug 196117] " bugzilla-daemon
2017-06-18 20:35 ` [Bug 196117] amdgpu - RX 480 (polaris) - freeze during boot bugzilla-daemon
2017-06-19  2:17 ` bugzilla-daemon
2017-06-19  8:17 ` bugzilla-daemon
2017-06-19 20:23 ` bugzilla-daemon
2017-06-22 23:22 ` bugzilla-daemon [this message]
2017-06-23 23:48 ` bugzilla-daemon
2017-06-23 23:50 ` bugzilla-daemon
2017-06-23 23:51 ` bugzilla-daemon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bug-196117-2300-1NssgPfhH8@https.bugzilla.kernel.org/ \
    --to=bugzilla-daemon@bugzilla.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.