From: bugzilla-daemon@bugzilla.kernel.org
To: kvm@kernel.org
Subject: [Bug 198589] System cannot boot with noreplace-paravirt
Date: Fri, 26 Jan 2018 05:55:28 +0000 [thread overview]
Message-ID: <bug-198589-28872-fBbvnx06ks@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-198589-28872@https.bugzilla.kernel.org/>
https://bugzilla.kernel.org/show_bug.cgi?id=198589
--- Comment #1 from Ziqian SUN (Zamir) (sztsian@gmail.com) ---
I did the same steps with 4.15.0-0.rc9.git0.1.fc28.x86_64, panic is shown on
console log.
[ 4.016156] PANIC: double fault, error_code: 0x0
[ 4.016912] CPU: 0 PID: 1 Comm: init Not tainted
4.15.0-0.rc9.git0.1.fc28.x86_64 #1
[ 4.018070] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.10.2-2.fc27 04/01/2014
[ 4.019323] RIP: 0010:async_page_fault+0x11/0x60
[ 4.019997] RSP: 0018:fffffe0000001fc8 EFLAGS: 00010046
[ 4.020723] RAX: 0000000085a00b37 RBX: 0000000000000001 RCX:
ffffffff85a00b37
[ 4.021616] RDX: 0000000000000000 RSI: 0000000000000010 RDI:
fffffe0000002078
[ 4.022506] RBP: 0000000000000000 R08: 0000000000000000 R09:
0000000000000000
[ 4.024147] R10: 0000000000000000 R11: 0000000000000000 R12:
0000000000000000
[ 4.025215] R13: 0000000000000000 R14: 0000000000000000 R15:
0000000000000000
[ 4.026248] FS: 0000000000000000(0000) GS:ffff93337fc00000(0000)
knlGS:0000000000000000
[ 4.028023] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4.029121] CR2: fffffe0000001fb8 CR3: 0000000078b24006 CR4:
00000000001606f0
[ 4.030100] Call Trace:
[ 4.030626] <ENTRY_TRAMPOLINE>
[ 4.031218] RIP: 0010:do_async_page_fault+0x0/0xa0
[ 4.031960] RSP: 0018:fffffe0000002070 EFLAGS: 00010097
[ 4.031977] async_page_fault+0x2c/0x60
[ 4.033444] RIP: 0010:do_async_page_fault+0x0/0xa0
[ 4.034225] RSP: 0018:fffffe0000002120 EFLAGS: 00010097
[ 4.035052] RAX: 0000000085a00b37 RBX: 0000000000000001 RCX:
ffffffff85a00b37
[ 4.036064] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
fffffe0000002128
[ 4.037115] RBP: 0000000000000000 R08: 0000000000000000 R09:
0000000000000000
[ 4.038074] R10: 0000000000000000 R11: 0000000000000000 R12:
0000000000000000
[ 4.039039] R13: 0000000000000000 R14: 0000000000000000 R15:
0000000000000000
[ 4.040077] ? native_iret+0x7/0x7
[ 4.040695] async_page_fault+0x2c/0x60
[ 4.041398] RIP: 0010:swapgs_restore_regs_and_return_to_usermode+0x7b/0x87
[ 4.042363] RSP: 0018:fffffe00000021d8 EFLAGS: 00010006
[ 4.043128] RAX: 0000000000000000 RBX: 0000000000000000 RCX:
0000000000000000
[ 4.044072] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
0000000000000000
[ 4.044997] RBP: 0000000000000000 R08: 0000000000000000 R09:
0000000000000000
[ 4.045957] R10: 0000000000000000 R11: 0000000000000000 R12:
0000000000000000
[ 4.047041] R13: 0000000000000000 R14: 0000000000000000 R15:
0000000000000000
[ 4.048061] WARNING: stack recursion on stack type 4
[ 4.048066] WARNING: can't dereference registers at 00000000c42fb14d for ip
swapgs_restore_regs_and_return_to_usermode+0x7b/0x87
[ 4.048074] </ENTRY_TRAMPOLINE>
[ 4.051169] Code: ff e8 b4 5c 66 ff e9 9f 02 00 00 0f 1f 44 00 00 66 2e 0f
1f 84 00 00 00 00 00 0f 1f 00 48 83 c4 88 f6 84 24 88 00 00 00 03 75 20 <e8> 6a
01 00 00 48 89 e7 48 8b 74 24 78 48 c7 44 24 78 ff ff ff
[ 4.055714] Kernel panic - not syncing: Machine halted.
[ 4.056985] CPU: 0 PID: 1 Comm: init Not tainted
4.15.0-0.rc9.git0.1.fc28.x86_64 #1
[ 4.058668] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.10.2-2.fc27 04/01/2014
[ 4.060218] Call Trace:
[ 4.060740] <#DF>
[ 4.061214] dump_stack+0x5c/0x85
[ 4.061825] panic+0xe4/0x252
[ 4.062388] df_debug+0x29/0x30
[ 4.062979] do_double_fault+0x9f/0x130
[ 4.063634] double_fault+0x22/0x30
[ 4.064262] RIP: 0010:async_page_fault+0x11/0x60
[ 4.065013] RSP: 0018:fffffe0000001fc8 EFLAGS: 00010046
[ 4.065824] RAX: 0000000085a00b37 RBX: 0000000000000001 RCX:
ffffffff85a00b37
[ 4.066791] RDX: 0000000000000000 RSI: 0000000000000010 RDI:
fffffe0000002078
[ 4.067751] RBP: 0000000000000000 R08: 0000000000000000 R09:
0000000000000000
[ 4.068764] R10: 0000000000000000 R11: 0000000000000000 R12:
0000000000000000
[ 4.069771] R13: 0000000000000000 R14: 0000000000000000 R15:
0000000000000000
[ 4.070705] ? native_iret+0x7/0x7
[ 4.071287] </#DF>
[ 4.071796] <ENTRY_TRAMPOLINE>
[ 4.072383] RIP: 0010:do_async_page_fault+0x0/0xa0
[ 4.073123] RSP: 0018:fffffe0000002070 EFLAGS: 00010097
[ 4.073141] async_page_fault+0x2c/0x60
[ 4.074607] RIP: 0010:do_async_page_fault+0x0/0xa0
[ 4.075309] RSP: 0018:fffffe0000002120 EFLAGS: 00010097
[ 4.076061] RAX: 0000000085a00b37 RBX: 0000000000000001 RCX:
ffffffff85a00b37
[ 4.077037] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
fffffe0000002128
[ 4.078064] RBP: 0000000000000000 R08: 0000000000000000 R09:
0000000000000000
[ 4.079122] R10: 0000000000000000 R11: 0000000000000000 R12:
0000000000000000
[ 4.080151] R13: 0000000000000000 R14: 0000000000000000 R15:
0000000000000000
[ 4.081184] ? native_iret+0x7/0x7
[ 4.081792] async_page_fault+0x2c/0x60
[ 4.082476] RIP: 0010:swapgs_restore_regs_and_return_to_usermode+0x7b/0x87
[ 4.084617] RSP: 0018:fffffe00000021d8 EFLAGS: 00010006
[ 4.085410] RAX: 0000000000000000 RBX: 0000000000000000 RCX:
0000000000000000
[ 4.086389] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
0000000000000000
[ 4.087805] RBP: 0000000000000000 R08: 0000000000000000 R09:
0000000000000000
[ 4.089310] R10: 0000000000000000 R11: 0000000000000000 R12:
0000000000000000
[ 4.090581] R13: 0000000000000000 R14: 0000000000000000 R15:
0000000000000000
[ 4.092036] </ENTRY_TRAMPOLINE>
[ 4.092741] Kernel Offset: 0x4000000 from 0xffffffff81000000 (relocation
range: 0xffffffff80000000-0xffffffffbfffffff)
[ 4.094174] ---[ end Kernel panic - not syncing: Machine halted.
--
You are receiving this mail because:
You are watching the assignee of the bug.
prev parent reply other threads:[~2018-01-26 5:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-26 5:54 [Bug 198589] New: System cannot boot with noreplace-paravirt bugzilla-daemon
2018-01-26 5:55 ` bugzilla-daemon [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-198589-28872-fBbvnx06ks@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=kvm@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.