All of lore.kernel.org
 help / color / mirror / Atom feed
From: bugzilla-daemon@bugzilla.kernel.org
To: linuxppc-dev@lists.ozlabs.org
Subject: [Bug 200055] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3214 .__lockdep_init_map+0x260/0x270
Date: Sat, 27 Jul 2019 22:47:03 +0000	[thread overview]
Message-ID: <bug-200055-206035-tlHVbbYdYq@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-200055-206035@https.bugzilla.kernel.org/>

https://bugzilla.kernel.org/show_bug.cgi?id=200055

--- Comment #19 from Erhard F. (erhard_f@mailbox.org) ---
Created attachment 284001
  --> https://bugzilla.kernel.org/attachment.cgi?id=284001&action=edit
bisect.log

At last... I got the offending commit. Funnily enough it is about silencing
lockdep warnings. ;)

9e607f72748ddc5620aeeb8d1f32f30c79b360b9 is the first bad commit
commit 9e607f72748ddc5620aeeb8d1f32f30c79b360b9
Author: Denis Kirjanov <kda@linux-powerpc.org>
Date:   Wed Sep 21 14:34:58 2016 +0300

    i2c_powermac: shut up lockdep warning

    That's unclear why lockdep shows the following warning but adding a
    lockdep class to struct pmac_i2c_bus solves it

    [   20.507795] ======================================================
    [   20.507796] [ INFO: possible circular locking dependency detected ]
    [   20.507800] 4.8.0-rc7-00037-gd2ffb01 #21 Not tainted
    [   20.507801] -------------------------------------------------------
    [   20.507803] swapper/0/1 is trying to acquire lock:
    [   20.507818]  (&bus->mutex){+.+.+.}, at: [<c000000000052830>]
.pmac_i2c_open+0x30/0x100
    [   20.507819]
    [   20.507819] but task is already holding lock:
    [   20.507829]  (&policy->rwsem){+.+.+.}, at: [<c00000000068adcc>]
.cpufreq_online+0x1ac/0x9d0
    [   20.507830]
    [   20.507830] which lock already depends on the new lock.
    [   20.507830]
    [   20.507832]
    [   20.507832] the existing dependency chain (in reverse order) is:
    [   20.507837]
    [   20.507837] -> #4 (&policy->rwsem){+.+.+.}:
    [   20.507844]        [<c00000000082385c>] .down_write+0x6c/0x110
    [   20.507849]        [<c00000000068adcc>] .cpufreq_online+0x1ac/0x9d0
    [   20.507855]        [<c0000000004d76d8>]
.subsys_interface_register+0xb8/0x110
    [   20.507860]        [<c000000000689bb0>]
.cpufreq_register_driver+0x1d0/0x250
    [   20.507866]        [<c000000000b4f8f4>] .g5_cpufreq_init+0x9cc/0xa28
    [   20.507872]        [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0
    [   20.507878]        [<c000000000b0f86c>]
.kernel_init_freeable+0x1ac/0x28c
    [   20.507883]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
    [   20.507887]        [<c0000000000098f4>]
.ret_from_kernel_thread+0x58/0x64
    [   20.507894]
    [   20.507894] -> #3 (subsys mutex#2){+.+.+.}:
    [   20.507899]        [<c000000000820448>] .mutex_lock_nested+0xa8/0x590
    [   20.507903]        [<c0000000004d7f24>] .bus_probe_device+0x44/0xe0
    [   20.507907]        [<c0000000004d5208>] .device_add+0x508/0x730
    [   20.507911]        [<c0000000004dd528>] .register_cpu+0x118/0x190
    [   20.507916]        [<c000000000b14450>] .topology_init+0x148/0x248
    [   20.507921]        [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0
    [   20.507925]        [<c000000000b0f86c>]
.kernel_init_freeable+0x1ac/0x28c
    [   20.507929]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
    [   20.507934]        [<c0000000000098f4>]
.ret_from_kernel_thread+0x58/0x64
    [   20.507939]
    [   20.507939] -> #2 (cpu_add_remove_lock){+.+.+.}:
    [   20.507944]        [<c000000000820448>] .mutex_lock_nested+0xa8/0x590
    [   20.507950]        [<c000000000087a9c>] .register_cpu_notifier+0x2c/0x70
    [   20.507955]        [<c000000000b267e0>] .spawn_ksoftirqd+0x18/0x4c
    [   20.507959]        [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0
    [   20.507964]        [<c000000000b0f770>] .kernel_init_freeable+0xb0/0x28c
    [   20.507968]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
    [   20.507972]        [<c0000000000098f4>]
.ret_from_kernel_thread+0x58/0x64
    [   20.507978]
    [   20.507978] -> #1 (&host->mutex){+.+.+.}:
    [   20.507982]        [<c000000000820448>] .mutex_lock_nested+0xa8/0x590
    [   20.507987]        [<c0000000000527e8>] .kw_i2c_open+0x18/0x30
    [   20.507991]        [<c000000000052894>] .pmac_i2c_open+0x94/0x100
    [   20.507995]        [<c000000000b220a0>] .smp_core99_probe+0x260/0x410
    [   20.507999]        [<c000000000b185bc>] .smp_prepare_cpus+0x280/0x2ac
    [   20.508003]        [<c000000000b0f748>] .kernel_init_freeable+0x88/0x28c
    [   20.508008]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
    [   20.508012]        [<c0000000000098f4>]
.ret_from_kernel_thread+0x58/0x64
    [   20.508018]
    [   20.508018] -> #0 (&bus->mutex){+.+.+.}:
    [   20.508023]        [<c0000000000ed5b4>] .lock_acquire+0x84/0x100
    [   20.508027]        [<c000000000820448>] .mutex_lock_nested+0xa8/0x590
    [   20.508032]        [<c000000000052830>] .pmac_i2c_open+0x30/0x100
    [   20.508037]        [<c000000000052e14>] .pmac_i2c_do_begin+0x34/0x120
    [   20.508040]        [<c000000000056bc0>] .pmf_call_one+0x50/0xd0
    [   20.508045]        [<c00000000068ff1c>] .g5_pfunc_switch_volt+0x2c/0xc0
    [   20.508050]        [<c00000000068fecc>]
.g5_pfunc_switch_freq+0x1cc/0x1f0
    [   20.508054]        [<c00000000068fc2c>] .g5_cpufreq_target+0x2c/0x40
    [   20.508058]        [<c0000000006873ec>]
.__cpufreq_driver_target+0x23c/0x840
    [   20.508062]        [<c00000000068c798>]
.cpufreq_gov_performance_limits+0x18/0x30
    [   20.508067]        [<c00000000068915c>]
.cpufreq_start_governor+0xac/0x100
    [   20.508071]        [<c00000000068a788>] .cpufreq_set_policy+0x208/0x260
    [   20.508076]        [<c00000000068abdc>] .cpufreq_init_policy+0x6c/0xb0
    [   20.508081]        [<c00000000068ae70>] .cpufreq_online+0x250/0x9d0
    [   20.508085]        [<c0000000004d76d8>]
.subsys_interface_register+0xb8/0x110
    [   20.508090]        [<c000000000689bb0>]
.cpufreq_register_driver+0x1d0/0x250
    [   20.508094]        [<c000000000b4f8f4>] .g5_cpufreq_init+0x9cc/0xa28
    [   20.508099]        [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0
    [   20.508103]        [<c000000000b0f86c>]
.kernel_init_freeable+0x1ac/0x28c
    [   20.508107]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
    [   20.508112]        [<c0000000000098f4>]
.ret_from_kernel_thread+0x58/0x64
    [   20.508113]
    [   20.508113] other info that might help us debug this:
    [   20.508113]
    [   20.508121] Chain exists of:
    [   20.508121]   &bus->mutex --> subsys mutex#2 --> &policy->rwsem
    [   20.508121]
    [   20.508123]  Possible unsafe locking scenario:
    [   20.508123]
    [   20.508124]        CPU0                    CPU1
    [   20.508125]        ----                    ----
    [   20.508128]   lock(&policy->rwsem);
    [   20.508132]                                lock(subsys mutex#2);
    [   20.508135]                                lock(&policy->rwsem);
    [   20.508138]   lock(&bus->mutex);
    [   20.508139]
    [   20.508139]  *** DEADLOCK ***
    [   20.508139]
    [   20.508141] 3 locks held by swapper/0/1:
    [   20.508150]  #0:  (cpu_hotplug.lock){++++++}, at: [<c000000000087838>]
.get_online_cpus+0x48/0xc0
    [   20.508159]  #1:  (subsys mutex#2){+.+.+.}, at: [<c0000000004d7670>]
.subsys_interface_register+0x50/0x110
    [   20.508168]  #2:  (&policy->rwsem){+.+.+.}, at: [<c00000000068adcc>]
.cpufreq_online+0x1ac/0x9d0
    [   20.508169]
    [   20.508169] stack backtrace:
    [   20.508173] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
4.8.0-rc7-00037-gd2ffb01 #21
    [   20.508175] Call Trace:
    [   20.508180] [c0000000790c2b90] [c00000000082cc70] .dump_stack+0xe0/0x14c
(unreliable)
    [   20.508184] [c0000000790c2c20] [c000000000828c88]
.print_circular_bug+0x350/0x388
    [   20.508188] [c0000000790c2cd0] [c0000000000ecb0c]
.__lock_acquire+0x196c/0x1d30
    [   20.508192] [c0000000790c2e50] [c0000000000ed5b4]
.lock_acquire+0x84/0x100
    [   20.508196] [c0000000790c2f20] [c000000000820448]
.mutex_lock_nested+0xa8/0x590
    [   20.508201] [c0000000790c3030] [c000000000052830]
.pmac_i2c_open+0x30/0x100
    [   20.508206] [c0000000790c30c0] [c000000000052e14]
.pmac_i2c_do_begin+0x34/0x120
    [   20.508209] [c0000000790c3150] [c000000000056bc0]
.pmf_call_one+0x50/0xd0
    [   20.508213] [c0000000790c31e0] [c00000000068ff1c]
.g5_pfunc_switch_volt+0x2c/0xc0
    [   20.508217] [c0000000790c3250] [c00000000068fecc]
.g5_pfunc_switch_freq+0x1cc/0x1f0
    [   20.508221] [c0000000790c3320] [c00000000068fc2c]
.g5_cpufreq_target+0x2c/0x40
    [   20.508226] [c0000000790c3390] [c0000000006873ec]
.__cpufreq_driver_target+0x23c/0x840
    [   20.508230] [c0000000790c3440] [c00000000068c798]
.cpufreq_gov_performance_limits+0x18/0x30
    [   20.508235] [c0000000790c34b0] [c00000000068915c]
.cpufreq_start_governor+0xac/0x100
    [   20.508239] [c0000000790c3530] [c00000000068a788]
.cpufreq_set_policy+0x208/0x260
    [   20.508244] [c0000000790c35d0] [c00000000068abdc]
.cpufreq_init_policy+0x6c/0xb0
    [   20.508249] [c0000000790c3940] [c00000000068ae70]
.cpufreq_online+0x250/0x9d0
    [   20.508253] [c0000000790c3a30] [c0000000004d76d8]
.subsys_interface_register+0xb8/0x110
    [   20.508258] [c0000000790c3ad0] [c000000000689bb0]
.cpufreq_register_driver+0x1d0/0x250
    [   20.508262] [c0000000790c3b60] [c000000000b4f8f4]
.g5_cpufreq_init+0x9cc/0xa28
    [   20.508267] [c0000000790c3c20] [c00000000000a98c]
.do_one_initcall+0x5c/0x1d0
    [   20.508271] [c0000000790c3d00] [c000000000b0f86c]
.kernel_init_freeable+0x1ac/0x28c
    [   20.508276] [c0000000790c3db0] [c00000000000b3bc]
.kernel_init+0x1c/0x140
    [   20.508280] [c0000000790c3e30] [c0000000000098f4]
.ret_from_kernel_thread+0x58/0x64

    Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
    Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

:040000 040000 18ec5f23dbd03c624aae71f3cbb05466dd38bf91
d4d7866e7cf3060e9ae1c76ad390194d4d789dcd M      arch

-- 
You are receiving this mail because:
You are watching the assignee of the bug.

  parent reply	other threads:[~2019-07-27 22:48 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <bug-200055-206035@https.bugzilla.kernel.org/>
2019-07-14 10:46 ` [Bug 200055] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3214 .__lockdep_init_map+0x260/0x270 bugzilla-daemon
2019-07-14 10:47 ` bugzilla-daemon
2019-07-14 10:48 ` bugzilla-daemon
2019-07-14 10:49 ` bugzilla-daemon
2019-07-27 22:47 ` bugzilla-daemon [this message]
2019-07-27 22:48 ` bugzilla-daemon
2019-07-27 23:00 ` bugzilla-daemon
2020-12-28 14:23 ` [Bug 200055] [Bisected][Regression] " bugzilla-daemon
2020-12-28 14:23 ` bugzilla-daemon
2022-03-12 22:07 ` bugzilla-daemon
2022-03-12 22:08 ` bugzilla-daemon
2022-03-12 22:08 ` bugzilla-daemon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bug-200055-206035-tlHVbbYdYq@https.bugzilla.kernel.org/ \
    --to=bugzilla-daemon@bugzilla.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.