From: bugzilla-daemon@bugzilla.kernel.org
To: dri-devel@lists.freedesktop.org
Subject: [Bug 201539] AMDGPU R9 390 automatic fan speed control in Linux 4.19/4.20/5.0
Date: Sat, 06 Feb 2021 05:34:25 +0000 [thread overview]
Message-ID: <bug-201539-2300-64xWQHBLA7@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-201539-2300@https.bugzilla.kernel.org/>
https://bugzilla.kernel.org/show_bug.cgi?id=201539
--- Comment #75 from michael (lkbugs@deegan.id.au) ---
An update. Now on 5.10.0-2-amd64.
Fresh boot, with amdgpu.dc=1, everything is mostly fine. pwm1_enable=2. Except
that after resuming from suspend, pwm1_enable=1 and pwm1=255, resulting in
maxxed out fans. Subsequently setting pwm1_enable=2 results in old buggy
behaviour (2000RPM until 96C). However, if I suspend and resume again, it
sometimes goes back to behaving!
amdgpu.dc=0 is a bit of a non-starter, as while fan speeds remain low, so does
performance.
In all cases temp1_crit and temp1_crit_hyst still have crazy values (104000000
and -273).
--
You may reply to this email to add a comment.
You are receiving this mail because:
You are watching the assignee of the bug.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2021-02-06 5:34 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-27 12:32 [Bug 201539] New: AMDGPU R9 390 automatic fan speed control in Linux 4.19 bugzilla-daemon
2018-10-27 12:34 ` [Bug 201539] " bugzilla-daemon
2018-10-27 12:35 ` bugzilla-daemon
2018-10-27 12:45 ` bugzilla-daemon
2018-12-08 7:59 ` bugzilla-daemon
2018-12-21 1:30 ` bugzilla-daemon
2018-12-21 2:16 ` bugzilla-daemon
2018-12-21 15:06 ` bugzilla-daemon
2018-12-21 15:56 ` bugzilla-daemon
2018-12-24 11:55 ` [Bug 201539] AMDGPU R9 390 automatic fan speed control in Linux 4.19/4.20 bugzilla-daemon
2018-12-24 11:55 ` bugzilla-daemon
2018-12-31 9:06 ` bugzilla-daemon
2019-01-05 13:41 ` bugzilla-daemon
2019-03-04 2:17 ` [Bug 201539] AMDGPU R9 390 automatic fan speed control in Linux 4.19/4.20/5.0 bugzilla-daemon
2019-03-09 2:44 ` bugzilla-daemon
2019-04-17 10:37 ` bugzilla-daemon
2019-06-06 11:18 ` bugzilla-daemon
2019-06-06 11:44 ` bugzilla-daemon
2019-06-06 12:18 ` bugzilla-daemon
2019-06-07 1:41 ` bugzilla-daemon
2019-06-18 17:42 ` bugzilla-daemon
2019-06-24 2:18 ` bugzilla-daemon
2019-10-05 13:19 ` bugzilla-daemon
2019-11-03 4:08 ` bugzilla-daemon
2019-11-03 4:16 ` bugzilla-daemon
2019-11-03 4:29 ` bugzilla-daemon
2019-11-03 4:37 ` bugzilla-daemon
2019-11-05 23:47 ` bugzilla-daemon
2019-11-06 9:35 ` bugzilla-daemon
2019-11-16 0:42 ` bugzilla-daemon
2019-11-16 0:57 ` bugzilla-daemon
2019-11-16 12:07 ` bugzilla-daemon
2019-11-16 13:36 ` bugzilla-daemon
2019-11-16 14:15 ` bugzilla-daemon
2019-11-16 22:35 ` bugzilla-daemon
2019-11-17 0:43 ` bugzilla-daemon
2019-11-17 7:46 ` bugzilla-daemon
2019-12-05 17:00 ` bugzilla-daemon
2019-12-06 2:58 ` bugzilla-daemon
2019-12-06 3:04 ` bugzilla-daemon
2019-12-06 3:22 ` bugzilla-daemon
2019-12-06 4:30 ` bugzilla-daemon
2019-12-06 4:32 ` bugzilla-daemon
2019-12-06 4:45 ` bugzilla-daemon
2019-12-06 5:01 ` bugzilla-daemon
2019-12-06 5:52 ` bugzilla-daemon
2019-12-06 5:56 ` bugzilla-daemon
2019-12-07 19:48 ` bugzilla-daemon
2019-12-07 20:05 ` bugzilla-daemon
2019-12-07 20:20 ` bugzilla-daemon
2019-12-07 20:46 ` bugzilla-daemon
2019-12-07 21:04 ` bugzilla-daemon
2019-12-09 0:33 ` bugzilla-daemon
2019-12-09 0:55 ` bugzilla-daemon
2019-12-09 21:26 ` bugzilla-daemon
2019-12-10 1:03 ` bugzilla-daemon
2020-05-21 15:31 ` bugzilla-daemon
2020-06-03 8:26 ` bugzilla-daemon
2020-08-10 0:26 ` bugzilla-daemon
2020-12-01 21:54 ` bugzilla-daemon
2020-12-01 21:57 ` bugzilla-daemon
2020-12-01 22:47 ` bugzilla-daemon
2020-12-01 23:01 ` bugzilla-daemon
2020-12-02 1:33 ` bugzilla-daemon
2020-12-02 3:30 ` bugzilla-daemon
2020-12-02 3:34 ` bugzilla-daemon
2020-12-02 8:38 ` bugzilla-daemon
2020-12-02 9:57 ` bugzilla-daemon
2020-12-02 16:21 ` bugzilla-daemon
2020-12-02 19:31 ` bugzilla-daemon
2020-12-02 20:16 ` bugzilla-daemon
2020-12-02 21:11 ` bugzilla-daemon
2020-12-03 1:04 ` bugzilla-daemon
2020-12-13 23:56 ` bugzilla-daemon
2020-12-14 23:05 ` bugzilla-daemon
2020-12-14 23:26 ` bugzilla-daemon
2020-12-14 23:44 ` bugzilla-daemon
2021-02-06 5:34 ` bugzilla-daemon [this message]
2022-02-05 21:59 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-201539-2300-64xWQHBLA7@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.