From: bugzilla-daemon@bugzilla.kernel.org
To: dri-devel@lists.freedesktop.org
Subject: [Bug 201835] New: nouveau 0000:01:00.0: fifo: fault 01 [WRITE] at 0000000000160000 engine 15 [CE0] client 01 [HUB/CE0] reason c2 [] on channel 0 [00ff9a6000 DRM]
Date: Sun, 02 Dec 2018 11:07:41 +0000 [thread overview]
Message-ID: <bug-201835-2300@https.bugzilla.kernel.org/> (raw)
https://bugzilla.kernel.org/show_bug.cgi?id=201835
Bug ID: 201835
Summary: nouveau 0000:01:00.0: fifo: fault 01 [WRITE] at
0000000000160000 engine 15 [CE0] client 01 [HUB/CE0]
reason c2 [] on channel 0 [00ff9a6000 DRM]
Product: Drivers
Version: 2.5
Kernel Version: 4.19.5
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Video(DRI - non Intel)
Assignee: drivers_video-dri@kernel-bugs.osdl.org
Reporter: marc@osknowledge.org
Regression: No
[2018-11-29 14:05:10] err kern 03 kernel : nouveau 0000:01:00.0: fifo: fault 01
[WRITE] at 0000000000160000 engine 15 [CE0] client 01 [HUB/CE0] reason c2 [] on
channel 0 [00ff9a6000 DRM]
[2018-11-29 14:05:10] notice kern 05 kernel : nouveau 0000:01:00.0: fifo:
channel 0: killed
[2018-11-29 14:05:10] notice kern 05 kernel : nouveau 0000:01:00.0: fifo:
runlist 0: scheduled for recovery
[2018-11-29 14:05:10] notice kern 05 kernel : nouveau 0000:01:00.0: fifo:
runlist 4: scheduled for recovery
[2018-11-29 14:05:10] notice kern 05 kernel : nouveau 0000:01:00.0: fifo:
engine 4: scheduled for recovery
[2018-11-29 14:05:10] err kern 03 kernel : [19570.911809] nouveau 0000:01:00.0:
fifo: fault 01 [WRITE] at 0000000000160000 engine 15 [CE0] client 01 [HUB/CE0]
reason c2 [] on channel 0 [00ff9a6000 DRM]
[2018-11-29 14:05:10] notice kern 05 kernel : [19570.911814] nouveau
0000:01:00.0: fifo: channel 0: killed
[2018-11-29 14:05:10] notice kern 05 kernel : [19570.911817] nouveau
0000:01:00.0: fifo: runlist 0: scheduled for recovery
[2018-11-29 14:05:10] notice kern 05 kernel : [19570.911825] nouveau
0000:01:00.0: fifo: runlist 4: scheduled for recovery
[2018-11-29 14:05:10] notice kern 05 kernel : [19570.911828] nouveau
0000:01:00.0: fifo: engine 4: scheduled for recovery
Hardware is
01:00.0 VGA compatible controller: NVIDIA Corporation GM107GLM [Quadro M2000M]
(rev a2) (prog-if 00 [VGA controller])
Subsystem: Lenovo GM107GLM [Quadro M2000M]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 121
Region 0: Memory at c2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at c0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 4000 [size=128]
Expansion ROM at c3080000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00238 Data: 0000
Capabilities: [78] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
unlimited, L1 <64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
SlotPowerLimit 75.000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend+
LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit
Latency L0s <512ns, L1 <4us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR+, OBFF
Via message
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+,
OBFF Disabled
AtomicOpsCtl: ReqEn-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
LnkSta2: Current De-emphasis Level: -3.5dB,
EqualizationComplete+, EqualizationPhase1+
EqualizationPhase2+, EqualizationPhase3+,
LinkEqualizationRequest-
Kernel driver in use: nouveau
--
You are receiving this mail because:
You are watching the assignee of the bug.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
reply other threads:[~2018-12-02 11:07 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-201835-2300@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.