From: bugzilla-daemon@bugzilla.kernel.org
To: dri-devel@lists.freedesktop.org
Subject: [Bug 210429] AMDGPU - DRM connector force-probe after DPMS causes monitor to reconnect
Date: Tue, 22 Dec 2020 17:16:42 +0000 [thread overview]
Message-ID: <bug-210429-2300-2b4QwvBvhp@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-210429-2300@https.bugzilla.kernel.org/>
https://bugzilla.kernel.org/show_bug.cgi?id=210429
--- Comment #2 from jordanleppert@gmail.com ---
Here are logs using Wayfire (a wlroots compositor), note the disconnect
immediately after modesetting. The DPMS sleep happened at 15:46:45, and the
wakeup at 15:46:54.
DD 22-12-20 15:46:45.685 - [backend/drm/drm.c:1075] Reallocating CRTCs
DD 22-12-20 15:46:45.686 - [backend/drm/drm.c:1086] State before reallocation:
DD 22-12-20 15:46:45.686 - [backend/drm/drm.c:1092] 'DP-1' crtc=0 state=3
desired_enabled=0
DD 22-12-20 15:46:45.686 - [backend/drm/drm.c:1092] 'DP-2' crtc=1 state=3
desired_enabled=1
DD 22-12-20 15:46:45.686 - [backend/drm/drm.c:1092] 'HDMI-A-1' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:45.686 - [backend/drm/drm.c:1092] 'HDMI-A-2' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:45.686 - [backend/drm/drm.c:1143] State after reallocation:
DD 22-12-20 15:46:45.686 - [backend/drm/drm.c:1150] 'DP-1' crtc=0 state=3
desired_enabled=0
DD 22-12-20 15:46:45.686 - [backend/drm/drm.c:1150] 'DP-2' crtc=1 state=3
desired_enabled=1
DD 22-12-20 15:46:45.686 - [backend/drm/drm.c:1150] 'HDMI-A-1' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:45.686 - [backend/drm/drm.c:1150] 'HDMI-A-2' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:45.719 - [backend/drm/drm.c:1075] Reallocating CRTCs
DD 22-12-20 15:46:45.719 - [backend/drm/drm.c:1086] State before reallocation:
DD 22-12-20 15:46:45.719 - [backend/drm/drm.c:1092] 'DP-1' crtc=0 state=3
desired_enabled=0
DD 22-12-20 15:46:45.719 - [backend/drm/drm.c:1092] 'DP-2' crtc=1 state=3
desired_enabled=0
DD 22-12-20 15:46:45.719 - [backend/drm/drm.c:1092] 'HDMI-A-1' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:45.719 - [backend/drm/drm.c:1092] 'HDMI-A-2' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:45.719 - [backend/drm/drm.c:1143] State after reallocation:
DD 22-12-20 15:46:45.719 - [backend/drm/drm.c:1150] 'DP-1' crtc=0 state=3
desired_enabled=0
DD 22-12-20 15:46:45.719 - [backend/drm/drm.c:1150] 'DP-2' crtc=1 state=3
desired_enabled=0
DD 22-12-20 15:46:45.719 - [backend/drm/drm.c:1150] 'HDMI-A-1' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:45.719 - [backend/drm/drm.c:1150] 'HDMI-A-2' crtc=-1
state=0 desired_enabled=0
II 22-12-20 15:46:54.467 - [backend/drm/drm.c:793] connector DP-1: Modesetting
with '3840x2160@59997mHz'
DD 22-12-20 15:46:54.467 - [backend/drm/drm.c:679] connector DP-1: Initializing
renderer
II 22-12-20 15:46:54.483 - [backend/drm/drm.c:793] connector DP-2: Modesetting
with '3840x2160@59997mHz'
DD 22-12-20 15:46:54.483 - [backend/drm/drm.c:679] connector DP-2: Initializing
renderer
II 22-12-20 15:46:56.808 - [backend/drm/drm.c:1219] Scanning DRM connectors on
/dev/dri/card0
II 22-12-20 15:46:56.810 - [backend/drm/drm.c:1388] 'DP-2' disconnected
DD 22-12-20 15:46:56.907 - [backend/drm/drm.c:1075] Reallocating CRTCs
DD 22-12-20 15:46:56.907 - [backend/drm/drm.c:1086] State before reallocation:
DD 22-12-20 15:46:56.907 - [backend/drm/drm.c:1092] 'DP-1' crtc=0 state=3
desired_enabled=1
DD 22-12-20 15:46:56.907 - [backend/drm/drm.c:1092] 'DP-2' crtc=1 state=3
desired_enabled=0
DD 22-12-20 15:46:56.907 - [backend/drm/drm.c:1092] 'HDMI-A-1' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:56.907 - [backend/drm/drm.c:1092] 'HDMI-A-2' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:56.907 - [backend/drm/drm.c:1143] State after reallocation:
DD 22-12-20 15:46:56.907 - [backend/drm/drm.c:1150] 'DP-1' crtc=0 state=3
desired_enabled=1
DD 22-12-20 15:46:56.907 - [backend/drm/drm.c:1150] 'DP-2' crtc=1 state=3
desired_enabled=0
DD 22-12-20 15:46:56.907 - [backend/drm/drm.c:1150] 'HDMI-A-1' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:56.907 - [backend/drm/drm.c:1150] 'HDMI-A-2' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:56.907 - [backend/drm/drm.c:1049] connector DP-2:
De-allocating CRTC 1
DD 22-12-20 15:46:56.908 - [backend/drm/drm.c:1075] Reallocating CRTCs
DD 22-12-20 15:46:56.908 - [backend/drm/drm.c:1086] State before reallocation:
DD 22-12-20 15:46:56.908 - [backend/drm/drm.c:1092] 'DP-1' crtc=0 state=3
desired_enabled=1
DD 22-12-20 15:46:56.908 - [backend/drm/drm.c:1092] 'DP-2' crtc=-1 state=0
desired_enabled=0
DD 22-12-20 15:46:56.908 - [backend/drm/drm.c:1092] 'HDMI-A-1' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:56.908 - [backend/drm/drm.c:1092] 'HDMI-A-2' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:56.908 - [backend/drm/drm.c:1143] State after reallocation:
DD 22-12-20 15:46:56.908 - [backend/drm/drm.c:1150] 'DP-1' crtc=0 state=3
desired_enabled=1
DD 22-12-20 15:46:56.908 - [backend/drm/drm.c:1150] 'DP-2' crtc=-1 state=0
desired_enabled=0
DD 22-12-20 15:46:56.908 - [backend/drm/drm.c:1150] 'HDMI-A-1' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:56.908 - [backend/drm/drm.c:1150] 'HDMI-A-2' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:56.908 - [backend/drm/drm.c:1442] No connector for CRTC 49
II 22-12-20 15:46:57.102 - [backend/drm/drm.c:1219] Scanning DRM connectors on
/dev/dri/card0
II 22-12-20 15:46:57.102 - [backend/drm/drm.c:1388] 'DP-1' disconnected
DD 22-12-20 15:46:57.173 - [backend/drm/drm.c:1075] Reallocating CRTCs
DD 22-12-20 15:46:57.173 - [backend/drm/drm.c:1086] State before reallocation:
DD 22-12-20 15:46:57.173 - [backend/drm/drm.c:1092] 'DP-1' crtc=0 state=3
desired_enabled=0
DD 22-12-20 15:46:57.173 - [backend/drm/drm.c:1092] 'DP-2' crtc=-1 state=0
desired_enabled=0
DD 22-12-20 15:46:57.173 - [backend/drm/drm.c:1092] 'HDMI-A-1' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:57.173 - [backend/drm/drm.c:1092] 'HDMI-A-2' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:57.174 - [backend/drm/drm.c:1143] State after reallocation:
DD 22-12-20 15:46:57.174 - [backend/drm/drm.c:1150] 'DP-1' crtc=0 state=3
desired_enabled=0
DD 22-12-20 15:46:57.174 - [backend/drm/drm.c:1150] 'DP-2' crtc=-1 state=0
desired_enabled=0
DD 22-12-20 15:46:57.174 - [backend/drm/drm.c:1150] 'HDMI-A-1' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:57.174 - [backend/drm/drm.c:1150] 'HDMI-A-2' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:57.174 - [backend/drm/drm.c:1049] connector DP-1:
De-allocating CRTC 0
DD 22-12-20 15:46:57.174 - [backend/drm/drm.c:1075] Reallocating CRTCs
DD 22-12-20 15:46:57.174 - [backend/drm/drm.c:1086] State before reallocation:
DD 22-12-20 15:46:57.174 - [backend/drm/drm.c:1092] 'DP-1' crtc=-1 state=0
desired_enabled=0
DD 22-12-20 15:46:57.174 - [backend/drm/drm.c:1092] 'DP-2' crtc=-1 state=0
desired_enabled=0
DD 22-12-20 15:46:57.174 - [backend/drm/drm.c:1092] 'HDMI-A-1' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:57.174 - [backend/drm/drm.c:1092] 'HDMI-A-2' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:57.175 - [backend/drm/drm.c:1143] State after reallocation:
DD 22-12-20 15:46:57.175 - [backend/drm/drm.c:1150] 'DP-1' crtc=-1 state=0
desired_enabled=0
DD 22-12-20 15:46:57.175 - [backend/drm/drm.c:1150] 'DP-2' crtc=-1 state=0
desired_enabled=0
DD 22-12-20 15:46:57.175 - [backend/drm/drm.c:1150] 'HDMI-A-1' crtc=-1
state=0 desired_enabled=0
DD 22-12-20 15:46:57.175 - [backend/drm/drm.c:1150] 'HDMI-A-2' crtc=-1
state=0 desired_enabled=0
--
You may reply to this email to add a comment.
You are receiving this mail because:
You are watching the assignee of the bug.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-12-22 17:16 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-30 17:50 [Bug 210429] New: AMDGPU - DRM connector force-probe after DPMS causes monitor to reconnect bugzilla-daemon
2020-11-30 18:56 ` [Bug 210429] " bugzilla-daemon
2020-12-22 17:16 ` bugzilla-daemon [this message]
2023-09-27 12:57 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-210429-2300-2b4QwvBvhp@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.