[Bug 214725] New: simpledrm and i915 both active after boot

[bugzilla-daemon@bugzilla.kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=214725

            Bug ID: 214725
           Summary: simpledrm and i915 both active after boot
           Product: Drivers
           Version: 2.5
    Kernel Version: 5.14.11
          Hardware: All
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: Video(DRI - non Intel)
          Assignee: drivers_video-dri@kernel-bugs.osdl.org
          Reporter: dennis.lissov@gmail.com
        Regression: No

Gentoo Linux, custom kernel build, 5.14.11 with
CONFIG_DRM_SIMPLEDRM=y
CONFIG_DRM_I915=y

Plasma (wayland) sees two monitors: the laptop screen and an unknown one. The
only monitor physically present is the laptop screen. This did not happen a few
months ago (possibly started with 5.14 upgrade).

$ ls /sys/class/drm/
card0  card0-eDP-1  card1  card1-Unknown-1  card2  card2-DP-1  card2-DP-2 
card2-DP-3  renderD128  renderD129  version
$ readlink /sys/class/drm/card0 # Intel GPU
../../devices/pci0000:00/0000:00:02.0/drm/card0
$ readlink /sys/class/drm/card1 # Simple DRM
../../devices/platform/simple-framebuffer.0/drm/card1
$ readlink /sys/class/drm/card2 # Nouveau (not used at the moment)
../../devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card2

$ dmesg | egrep '(simple|i915)'
[    0.000000] Command line: BOOT_IMAGE=/kernel-5.14.11 root=[...] ro
acpi_backlight=video resume=[...] i915.enable_gvt=1 quiet
[    0.060342] Kernel command line: BOOT_IMAGE=/kernel-5.14.11 root=[...] ro
acpi_backlight=video resume=[...] i915.enable_gvt=1 quiet
[    1.076957] i915 0000:00:02.0: [drm] VT-d active for gfx access
[    1.076961] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.387359] i915 0000:00:02.0: Direct firmware load for
i915/gvt/vid_0x8086_did_0x191b_rid_0x06.golden_hw_state failed with error -2
[    1.404418] i915 0000:00:02.0: vgaarb: changed VGA decodes:
olddecodes=io+mem,decodes=none:owns=io+mem
[    1.404525] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC)
to prevent screen flicker with VT-d enabled
[    1.404931] i915 0000:00:02.0: [drm] Finished loading DMC firmware
i915/skl_dmc_ver1_27.bin (v1.27)
[    1.422128] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor
0
[    1.425127] [drm] Initialized simpledrm 1.0.0 20200625 for
simple-framebuffer.0 on minor 1
[    1.437859] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrm
frame buffer device
[    1.438058] fbcon: i915 (fb1) is primary device
[    2.579133] i915 0000:00:02.0: [drm] fb1: i915 frame buffer device
[   22.162612] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops)
[   52.106084] simple-framebuffer simple-framebuffer.0: swiotlb buffer is full
(sz: 8388608 bytes), total 32768 (slots), used 0 (slots)

Looks like the hand-over mechanism does not correctly handle this combination,
possibly due to i915 loading before simpledrm.

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.