From: bugzilla-daemon@kernel.org
To: linux-usb@vger.kernel.org
Subject: [Bug 216282] usb-mass storage
Date: Fri, 29 Jul 2022 22:35:46 +0000 [thread overview]
Message-ID: <bug-216282-208809-jIWTvk1cyW@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-216282-208809@https.bugzilla.kernel.org/>
https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #22 from audioprof2001@yahoo.com ---
1 Fail, yes..
...
4 worked 1x time, because did not waited for hdd platter to stop before
turn-on. inertia.
...
10 works but probably more is required for 20TB.
The heavier the platter = more time.
Large HDDs "fail" because are sealed with Helium,
has gas leak,
was Not filled enough at factory,
does Not-pass Quality Control.
Temps are higher, does Not lower fast at Idle.
= more spin-up time,
sold cheaper without warranty. LOL™
creating /etc/modprobe.d/usb-storage.conf
adding
delay_use 15
Fails.
Parameter invalid,
but deletes the folder
/sys/module/usb_storage
Edit:
$ sudo tea /sys/module/usb_storage/parameters/delay_use
10
Save
works but...
each reboot Linux changes back to 1
---------------
$ sudo echo 2 >/sys/module/usb_storage/parameters/delay_use
bash: /sys/module/usb_storage/parameters/delay_use: Permission denied
Fail,
because modprobe usb-storage is loaded
$ sudo modprobe -r usb_storage
[sudo] password:
libkmod: ERROR ../libkmod/libkmod-config.c:712 kmod_config_parse:
/etc/modprobe.d/usb-storage.conf line 1: ignoring bad line starting with
'delay_use'
modprobe: FATAL: Module usb_storage is in use.
$ sudo modprobe -r usb_storage
libkmod: ERROR ../libkmod/libkmod-config.c:712 kmod_config_parse:
/etc/modprobe.d/usb-storage.conf line 1: ignoring bad line starting with
'delay'
modprobe: FATAL: Module usb_storage is in use.
$ sudo modprobe -r usb_storage
libkmod: ERROR ../libkmod/libkmod-config.c:712 kmod_config_parse:
/etc/modprobe.d/usb-storage.conf line 1: ignoring bad line starting with '2'
modprobe: FATAL: Module usb_storage is in use.
$ sudo modprobe -r usb_storage
libkmod: ERROR ../libkmod/libkmod-config.c:712 kmod_config_parse:
/etc/modprobe.d/usb-storage.conf line 1: ignoring bad line starting with
'delay'
modprobe: FATAL: Module usb_storage is in use.
$ sudo modprobe -r usb_storage
libkmod: ERROR ../libkmod/libkmod-config.c:712 kmod_config_parse:
/etc/modprobe.d/usb-storage.conf line 1: ignoring bad line starting with
'delay-use'
"Works"
--
You may reply to this email to add a comment.
You are receiving this mail because:
You are watching the assignee of the bug.
next prev parent reply other threads:[~2022-07-29 22:35 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-25 22:39 [Bug 216282] New: usb-mass storage bugzilla-daemon
2022-07-26 1:20 ` [Bug 216282] " bugzilla-daemon
2022-07-26 2:49 ` bugzilla-daemon
2022-07-26 3:07 ` bugzilla-daemon
2022-07-26 3:13 ` bugzilla-daemon
2022-07-26 3:41 ` bugzilla-daemon
2022-07-26 4:04 ` bugzilla-daemon
2022-07-26 4:25 ` bugzilla-daemon
2022-07-26 14:15 ` bugzilla-daemon
2022-07-26 15:45 ` bugzilla-daemon
2022-07-26 17:38 ` bugzilla-daemon
2022-07-26 19:20 ` bugzilla-daemon
2022-07-27 1:21 ` bugzilla-daemon
2022-07-27 1:42 ` bugzilla-daemon
2022-07-27 1:43 ` bugzilla-daemon
2022-07-27 1:45 ` bugzilla-daemon
2022-07-27 14:01 ` bugzilla-daemon
2022-07-28 3:44 ` bugzilla-daemon
2022-07-28 3:50 ` bugzilla-daemon
2022-07-28 14:42 ` bugzilla-daemon
2022-07-29 18:39 ` bugzilla-daemon
2022-07-29 20:06 ` bugzilla-daemon
2022-07-29 22:35 ` bugzilla-daemon [this message]
2022-07-30 2:38 ` bugzilla-daemon
2022-07-30 2:45 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-216282-208809-jIWTvk1cyW@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.