[Bug 217599] Adaptec 71605z hangs with aacraid: Host adapter abort request after update to linux 6.4.0

[bugzilla-daemon@kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=217599

Bagas Sanjaya (bagasdotme@gmail.com) changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |bagasdotme@gmail.com

--- Comment #1 from Bagas Sanjaya (bagasdotme@gmail.com) ---
(In reply to pheidologeton from comment #0)
> The controller works fine for a few minutes. Then it hangs for a few tens of
> seconds to a few minutes, then also works normally for a while. This bug is
> present in the 6.4.0 kernel release (6.3.9 works without hanging)
> The messages in dmesg are as follows
> 
> [  287.137901] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137909] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137912] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137914] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137916] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137919] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137921] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137924] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137926] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137928] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137930] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137933] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137934] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137937] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137939] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137941] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137943] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137945] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137947] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137949] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137951] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137952] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137954] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137956] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137958] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137960] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137962] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137964] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137966] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137967] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137969] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.137971] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  287.157697] aacraid: Host bus reset request. SCSI hang ?
> [  287.157706] aacraid 0000:02:00.0: outstanding cmd: midlevel-0
> [  287.157708] aacraid 0000:02:00.0: outstanding cmd: lowlevel-0
> [  287.157709] aacraid 0000:02:00.0: outstanding cmd: error handler-0
> [  287.157711] aacraid 0000:02:00.0: outstanding cmd: firmware-32
> [  287.157712] aacraid 0000:02:00.0: outstanding cmd: kernel-0
> [  287.167040] aacraid 0000:02:00.0: Controller reset type is 3
> [  287.167042] aacraid 0000:02:00.0: Issuing IOP reset
> [  321.029712] aacraid 0000:02:00.0: IOP reset succeeded
> [  321.066201] numacb=512 ignored
> [  321.066843] aacraid: Comm Interface type2 enabled
> [  344.845370] aacraid 0000:02:00.0: Scheduling bus rescan
> [  358.294342] sd 10:0:0:0: [sda] Very big device. Trying to use READ
> CAPACITY(16).
> [  442.109147] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109155] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109158] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109160] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109162] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109164] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109166] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109168] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109170] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109172] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109174] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109176] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109178] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109179] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109181] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109183] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109185] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109187] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109189] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109191] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109193] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109194] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109196] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109198] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109200] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109201] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109203] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109205] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109207] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109208] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.109210] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.137144] aacraid: Host adapter abort request.
>                aacraid: Outstanding commands on (10,0,0,0):
> [  442.154292] aacraid: Host bus reset request. SCSI hang ?
> [  442.154302] aacraid 0000:02:00.0: outstanding cmd: midlevel-0
> [  442.154305] aacraid 0000:02:00.0: outstanding cmd: lowlevel-0
> [  442.154307] aacraid 0000:02:00.0: outstanding cmd: error handler-0
> [  442.154308] aacraid 0000:02:00.0: outstanding cmd: firmware-32
> [  442.154310] aacraid 0000:02:00.0: outstanding cmd: kernel-0
> [  442.171131] aacraid 0000:02:00.0: Controller reset type is 3
> [  442.171133] aacraid 0000:02:00.0: Issuing IOP reset
> [  476.040983] aacraid 0000:02:00.0: IOP reset succeeded
> [  476.078055] numacb=512 ignored
> [  476.078606] aacraid: Comm Interface type2 enabled
> [  494.747632] aacraid 0000:02:00.0: Scheduling bus rescan
> [  507.896453] sd 10:0:0:0: [sda] Very big device. Trying to use READ
> CAPACITY(16).

Can you do bisection between v6.3 and v6.4 please?

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.