From: bugzilla-daemon@kernel.org
To: linux-usb@vger.kernel.org
Subject: [Bug 218118] New: USB3 port does not work on Chromebook XE303C12 with Linux kernel 6.5.11
Date: Wed, 08 Nov 2023 21:38:40 +0000 [thread overview]
Message-ID: <bug-218118-208809@https.bugzilla.kernel.org/> (raw)
https://bugzilla.kernel.org/show_bug.cgi?id=218118
Bug ID: 218118
Summary: USB3 port does not work on Chromebook XE303C12 with
Linux kernel 6.5.11
Product: Drivers
Version: 2.5
Hardware: ARM
OS: Linux
Status: NEW
Severity: normal
Priority: P3
Component: USB
Assignee: drivers_usb@kernel-bugs.kernel.org
Reporter: quark@disroot.org
Regression: No
With kernel 6.5.11 usb3 does not work at all.
With kernel 6.3.8, the usb3 port works if the device was connected before
powering on the laptop; after reconnecting, the usb3 port stops working.
There are no such problems with Linux kernel 5.15
Linux kernel 6.5.11, dmesg | grep usb:
[ 1.612078] usbcore: registered new interface driver usbfs
[ 1.612102] usbcore: registered new interface driver hub
[ 1.612126] usbcore: registered new device driver usb
[ 1.705362] samsung-usb2-phy 12130000.phy: supply vbus not found, using
dummy regulator
[ 1.705912] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found,
using dummy regulator
[ 1.737006] exynos-ehci 12110000.usb: EHCI Host Controller
[ 1.737108] exynos-ehci 12110000.usb: new USB bus registered, assigned bus
number 1
[ 1.737362] exynos-ehci 12110000.usb: irq 130, io mem 0x12110000
[ 1.757630] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[ 1.757808] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 6.05
[ 1.757818] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.757825] usb usb1: Product: EHCI Host Controller
[ 1.757830] usb usb1: Manufacturer: Linux 6.5.11 ehci_hcd
[ 1.757835] usb usb1: SerialNumber: 12110000.usb
[ 1.758868] exynos-ohci 12120000.usb: USB Host Controller
[ 1.758972] exynos-ohci 12120000.usb: new USB bus registered, assigned bus
number 2
[ 1.759045] exynos-ohci 12120000.usb: irq 130, io mem 0x12120000
[ 1.831869] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 6.05
[ 1.831878] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.831884] usb usb2: Product: USB Host Controller
[ 1.831889] usb usb2: Manufacturer: Linux 6.5.11 ohci_hcd
[ 1.831894] usb usb2: SerialNumber: 12120000.usb
[ 1.832951] usbcore: registered new interface driver cdc_acm
[ 1.832982] usbcore: registered new interface driver usblp
[ 1.833006] usbcore: registered new interface driver cdc_wdm
[ 1.833152] usbcore: registered new interface driver uas
[ 1.833190] usbcore: registered new interface driver usb-storage
[ 1.833211] usbcore: registered new interface driver ums-cypress
[ 1.833232] usbcore: registered new interface driver ums_eneub6250
[ 1.833253] usbcore: registered new interface driver ums-freecom
[ 1.833274] usbcore: registered new interface driver ums-isd200
[ 2.114593] usbcore: registered new interface driver vub300
[ 2.114624] usbcore: registered new interface driver ushc
[ 2.115336] usbcore: registered new interface driver usbhid
[ 2.115344] usbhid: USB HID core driver
[ 2.258696] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 6.05
[ 2.258705] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.258713] usb usb3: Product: xHCI Host Controller
[ 2.258718] usb usb3: Manufacturer: Linux 6.5.11 xhci-hcd
[ 2.258723] usb usb3: SerialNumber: xhci-hcd.7.auto
[ 2.259384] usb usb4: We don't know the algorithms for LPM for this host,
disabling LPM.
[ 2.259514] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003,
bcdDevice= 6.05
[ 2.259522] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.259528] usb usb4: Product: xHCI Host Controller
[ 2.259533] usb usb4: Manufacturer: Linux 6.5.11 xhci-hcd
[ 2.259538] usb usb4: SerialNumber: xhci-hcd.7.auto
[ 2.377724] usb 2-1: new low-speed USB device number 2 using exynos-ohci
[ 2.668653] usb 2-1: New USB device found, idVendor=0458, idProduct=003a,
bcdDevice= 1.00
[ 2.668667] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.668674] usb 2-1: Product: USB Optical Mouse
[ 2.668679] usb 2-1: Manufacturer: Genius
[ 2.675394] input: Genius USB Optical Mouse as
/devices/platform/soc/12120000.usb/usb2/2-1/2-1:1.0/0003:0458:003A.0001/input/input3
[ 2.675572] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.11
Mouse [Genius USB Optical Mouse] on usb-12120000.usb-1/input0
[ 4.398510] usb usb3-port1: attempt power cycle
[ 6.428387] usb usb3-port1: unable to enumerate USB device
Linux kernel 6.3.8, dmesg | grep usb:
[ 1.591836] usbcore: registered new interface driver usbfs
[ 1.591856] usbcore: registered new interface driver hub
[ 1.591877] usbcore: registered new device driver usb
[ 1.658666] samsung-usb2-phy 12130000.phy: supply vbus not found, using
dummy regulator
[ 1.659101] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found,
using dummy regulator
[ 1.701360] exynos-ehci 12110000.usb: EHCI Host Controller
[ 1.701451] exynos-ehci 12110000.usb: new USB bus registered, assigned bus
number 1
[ 1.701604] exynos-ehci 12110000.usb: irq 131, io mem 0x12110000
[ 1.726696] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[ 1.726898] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 6.03
[ 1.726907] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.726914] usb usb1: Product: EHCI Host Controller
[ 1.726919] usb usb1: Manufacturer: Linux 6.3.8 ehci_hcd
[ 1.726924] usb usb1: SerialNumber: 12110000.usb
[ 1.727933] exynos-ohci 12120000.usb: USB Host Controller
[ 1.728028] exynos-ohci 12120000.usb: new USB bus registered, assigned bus
number 2
[ 1.728098] exynos-ohci 12120000.usb: irq 131, io mem 0x12120000
[ 1.800917] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 6.03
[ 1.800926] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.800932] usb usb2: Product: USB Host Controller
[ 1.800937] usb usb2: Manufacturer: Linux 6.3.8 ohci_hcd
[ 1.800942] usb usb2: SerialNumber: 12120000.usb
[ 1.802519] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 6.03
[ 1.802528] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.802534] usb usb3: Product: xHCI Host Controller
[ 1.802539] usb usb3: Manufacturer: Linux 6.3.8 xhci-hcd
[ 1.802543] usb usb3: SerialNumber: xhci-hcd.1.auto
[ 1.803101] usb usb4: We don't know the algorithms for LPM for this host,
disabling LPM.
[ 1.803232] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003,
bcdDevice= 6.03
[ 1.803240] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.803245] usb usb4: Product: xHCI Host Controller
[ 1.803250] usb usb4: Manufacturer: Linux 6.3.8 xhci-hcd
[ 1.803255] usb usb4: SerialNumber: xhci-hcd.1.auto
[ 1.803794] usbcore: registered new interface driver cdc_acm
[ 1.803825] usbcore: registered new interface driver usblp
[ 1.803845] usbcore: registered new interface driver cdc_wdm
[ 1.803993] usbcore: registered new interface driver uas
[ 1.804037] usbcore: registered new interface driver usb-storage
[ 1.804057] usbcore: registered new interface driver ums-cypress
[ 1.804076] usbcore: registered new interface driver ums_eneub6250
[ 1.804094] usbcore: registered new interface driver ums-freecom
[ 1.804112] usbcore: registered new interface driver ums-isd200
[ 2.086726] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 2.095970] usbcore: registered new interface driver vub300
[ 2.096002] usbcore: registered new interface driver ushc
[ 2.096477] usbcore: registered new interface driver usbhid
[ 2.096483] usbhid: USB HID core driver
[ 2.278519] usb 3-1: New USB device found, idVendor=090c, idProduct=1000,
bcdDevice=11.00
[ 2.278531] usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.278537] usb 3-1: Product: Silicon-Power4G
[ 2.278542] usb 3-1: Manufacturer: UFD 2.0
[ 2.278548] usb 3-1: SerialNumber: 11111111111111
[ 2.279485] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 2.279934] scsi host0: usb-storage 3-1:1.0
[ 2.346703] usb 2-1: new low-speed USB device number 2 using exynos-ohci
[ 2.617740] usb 2-1: New USB device found, idVendor=0458, idProduct=003a,
bcdDevice= 1.00
[ 2.617755] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.617762] usb 2-1: Product: USB Optical Mouse
[ 2.617767] usb 2-1: Manufacturer: Genius
[ 2.624432] input: Genius USB Optical Mouse as
/devices/platform/soc/12120000.usb/usb2/2-1/2-1:1.0/0003:0458:003A.0001/input/input3
[ 2.625043] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.11
Mouse [Genius USB Optical Mouse] on usb-12120000.usb-1/input0
[ 67.531278] usb 3-1: USB disconnect, device number 2
[ 71.667630] usb usb3-port1: connect-debounce failed
--
You may reply to this email to add a comment.
You are receiving this mail because:
You are watching the assignee of the bug.
next reply other threads:[~2023-11-08 21:38 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-08 21:38 bugzilla-daemon [this message]
2023-11-09 14:52 ` [Bug 218118] USB3 port does not work on Chromebook XE303C12 with Linux kernel 6.5.11 bugzilla-daemon
2023-11-09 19:06 ` bugzilla-daemon
2023-11-09 19:07 ` bugzilla-daemon
2023-11-09 19:10 ` bugzilla-daemon
2023-11-10 9:24 ` bugzilla-daemon
2023-11-10 9:26 ` bugzilla-daemon
2023-11-10 9:27 ` bugzilla-daemon
2023-11-10 14:37 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-218118-208809@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.