From: bugzilla-daemon@freedesktop.org
To: dri-devel@lists.sourceforge.net
Subject: [Bug 26887] New: fence errors with rs785 and kernel 2.6.33
Date: Thu, 4 Mar 2010 07:52:44 -0800 (PST) [thread overview]
Message-ID: <bug-26887-502@http.bugs.freedesktop.org/> (raw)
http://bugs.freedesktop.org/show_bug.cgi?id=26887
Summary: fence errors with rs785 and kernel 2.6.33
Product: DRI
Version: DRI CVS
Platform: x86-64 (AMD64)
OS/Version: Linux (All)
Status: NEW
Severity: normal
Priority: medium
Component: DRM/Radeon
AssignedTo: dri-devel@lists.sourceforge.net
ReportedBy: marvin24@gmx.de
I'm getting fence errors on RS785 (radeon HD 4200) in dmesg and disabled dri
with vanilla 2.6.33. Error below and full dmesg attached.
[ 6.179288] [drm] Initialized drm 1.1.0 20060810
[ 6.647815] [drm] radeon defaulting to kernel modesetting.
[ 6.656630] [drm] radeon kernel modesetting enabled.
[ 6.665470] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.674214] radeon 0000:01:05.0: setting latency timer to 64
[ 6.675384] [drm] radeon: Initializing kernel modesetting.
[ 6.692803] [drm] register mmio base: 0xFE9F0000
[ 6.701275] [drm] register mmio size: 65536
[ 6.709638] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 6.718524] ATOM BIOS: 113
[ 6.726772] [drm] Clocks initialized !
[ 6.736928] [drm] Detected VRAM RAM=128M, BAR=128M
[ 6.737990] [drm] RAM width 32bits DDR
[ 6.739095] [TTM] Zone kernel: Available graphics memory: 2029616 kiB.
[ 6.740164] [drm] radeon: 128M of VRAM memory ready
[ 6.743646] [drm] radeon: 512M of GTT memory ready.
[ 6.744714] [drm] radeon: irq initialized.
[ 6.745728] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.747053] [drm] Loading RS780 Microcode
[ 6.748054] platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin
[ 6.767394] hda-codec: No codec parser is available
[ 6.788131] alloc irq_desc for 20 on node 0
[ 6.788133] alloc kstat_irqs on node 0
[ 6.788139] EMU10K1_Audigy 0000:03:05.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 6.880352] platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin
[ 6.964294] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
[ 7.059944] [drm] ring test succeeded in 1 usecs
[ 7.061030] [drm] radeon: ib pool ready.
[ 9.582117] [drm:radeon_fence_wait] *ERROR*
fence(ffff88011e2403c0:0x00000001) 510ms timeout going to reset GPU
[ 9.583167] radeon 0000:01:05.0: GPU softreset
[ 9.584211] radeon 0000:01:05.0: R_008010_GRBM_STATUS=0xA0003030
[ 9.585249] radeon 0000:01:05.0: R_008014_GRBM_STATUS2=0x00000003
[ 9.586278] radeon 0000:01:05.0: R_000E50_SRBM_STATUS=0x20002040
[ 9.792461] radeon 0000:01:05.0: Wait for MC idle timedout !
[ 9.793472] radeon 0000:01:05.0: R_008020_GRBM_SOFT_RESET=0x00007FEE
[ 9.794533] radeon 0000:01:05.0: R_008020_GRBM_SOFT_RESET=0x00000001
[ 9.795584] radeon 0000:01:05.0: R_000E60_SRBM_SOFT_RESET=0x00000C02
[ 9.796726] radeon 0000:01:05.0: R_008010_GRBM_STATUS=0x00003030
[ 9.797704] radeon 0000:01:05.0: R_008014_GRBM_STATUS2=0x00000003
[ 9.798674] radeon 0000:01:05.0: R_000E50_SRBM_STATUS=0x20000040
[ 9.801112] [drm:radeon_fence_wait] *ERROR*
fence(ffff88011e2403c0:0x00000001) 739ms timeout
[ 9.802083] [drm:radeon_fence_wait] *ERROR* last signaled fence(0x00000001)
[ 10.008268] [drm:r600_ib_test] *ERROR* radeon: ib test failed
(sracth(0x8504)=0xCAFEDEAD)
[ 10.009301] radeon 0000:01:05.0: IB test failed (-22).
[ 10.010248] [drm] Enabling audio support
[ 10.010428] [drm] Radeon Display Connectors
[ 10.012283] [drm] Connector 0:
[ 10.013201] [drm] VGA
[ 10.014107] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c
0x7e4c
[ 10.015027] [drm] Encoders:
[ 10.015932] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 10.016849] [drm] Connector 1:
[ 10.017756] [drm] DVI-D
[ 10.018655] [drm] HPD1
[ 10.019549] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c
0x7e5c
[ 10.020451] [drm] Encoders:
[ 10.021340] [drm] DFP3: INTERNAL_KLDSCP_LVTMA
[ 10.206070] [drm] fb mappable at 0xF0141000
[ 10.206943] [drm] vram apper at 0xF0000000
[ 10.207820] [drm] size 5242880
[ 10.208682] [drm] fb depth is 24
[ 10.209530] [drm] pitch is 5120
[ 10.210447] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing
generic driver
[ 10.211318] Console: switching to colour dummy device 80x25
[ 10.211436] Console: switching to colour frame buffer device 160x64
[ 10.217744] fb0: radeondrmfb frame buffer device
[ 10.217768] registered panic notifier
[ 10.217789] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on
minor 0
--
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
--
next reply other threads:[~2010-03-04 15:52 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-04 15:52 bugzilla-daemon [this message]
2010-03-04 15:53 ` [Bug 26887] fence errors with rs785 and kernel 2.6.33 bugzilla-daemon
2010-03-05 11:07 ` bugzilla-daemon
2010-03-05 11:41 ` bugzilla-daemon
2010-03-05 15:37 ` bugzilla-daemon
2010-03-08 8:57 ` bugzilla-daemon
2010-03-10 9:27 ` bugzilla-daemon
2010-03-12 20:11 ` bugzilla-daemon
2010-03-12 20:40 ` bugzilla-daemon
2010-03-13 16:52 ` bugzilla-daemon
2011-02-05 3:13 ` bugzilla-daemon
2017-04-28 9:02 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-26887-502@http.bugs.freedesktop.org/ \
--to=bugzilla-daemon@freedesktop.org \
--cc=dri-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.