From mboxrd@z Thu Jan 1 00:00:00 1970 From: bugzilla-daemon@freedesktop.org Subject: [Bug 27184] Radeon, KMS, 6.12.99: Sleeping screen doesn't wake up reliably Date: Tue, 14 Feb 2012 18:43:41 +0000 Message-ID: References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from annarchy.freedesktop.org (annarchy.freedesktop.org [131.252.210.176]) by gabe.freedesktop.org (Postfix) with ESMTP id D697C9E832 for ; Tue, 14 Feb 2012 10:43:41 -0800 (PST) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: dri-devel-bounces+sf-dri-devel=m.gmane.org@lists.freedesktop.org Errors-To: dri-devel-bounces+sf-dri-devel=m.gmane.org@lists.freedesktop.org To: dri-devel@lists.freedesktop.org List-Id: dri-devel@lists.freedesktop.org https://bugs.freedesktop.org/show_bug.cgi?id=27184 --- Comment #19 from tomi.orava@ncircle.nullnet.fi 2012-02-14 10:43:41 PST --- Sorry about the disappearence for a long time. I thought I had enabled the notifications for this bug. It seems that I still have this very same problem even with kernel.org 3.2.5 kernel. The previously mentioned workaround "xset dpms 0 240 0" that helped someone, did not work in my setup at all. In case the following debug info helps at all: get-edid | parse-edid get-edid: get-edid version 2.0.0 Performing real mode VBE call Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0 Function supported Call successful VBE version 300 VBE string at 0xc0204 "ATI ATOMBIOS" VBE/DDC service about to be called Report DDC capabilities Performing real mode VBE call Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0 Function supported Call successful Monitor and video card combination does not support DDC1 transfers Monitor and video card combination supports DDC2 transfers 0 seconds per 128 byte EDID block transfer Screen is not blanked during DDC transfer Reading next EDID block VBE/DDC service about to be called Read EDID Performing real mode VBE call Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0 [/pub/linux/kernel] alderan#root>get-edid | parse-edid 2>&1 get-edid: get-edid version 2.0.0 Performing real mode VBE call Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0 Function supported Call successful VBE version 300 VBE string at 0xc0204 "ATI ATOMBIOS" VBE/DDC service about to be called Report DDC capabilities Performing real mode VBE call Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0 Function supported Call successful Monitor and video card combination does not support DDC1 transfers Monitor and video card combination supports DDC2 transfers 0 seconds per 128 byte EDID block transfer Screen is not blanked during DDC transfer Reading next EDID block VBE/DDC service about to be called Read EDID Performing real mode VBE call Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0 parse-edid: parse-edid version 2.0.0 Function supported Call successful parse-edid: EDID checksum passed. # EDID version 1 revision 3 Section "Monitor" # Block type: 2:0 3:ff # Block type: 2:0 3:fd # Block type: 2:0 3:fc Identifier "BenQ G2400W" VendorName "BNQ" ModelName "BenQ G2400W" # Block type: 2:0 3:ff # Block type: 2:0 3:fd HorizSync 31-94 VertRefresh 50-85 # Max dot clock (video bandwidth) 170 MHz # Block type: 2:0 3:fc # DPMS capabilities: Active off:yes Suspend:no Standby:no Mode "1920x1200" # vfreq 59.950Hz, hfreq 74.038kHz DotClock 154.000000 HTimings 1920 1968 2000 2080 VTimings 1200 1203 1209 1235 Flags "-HSync" "+VSync" EndMode # Block type: 2:0 3:ff # Block type: 2:0 3:fd # Block type: 2:0 3:fc EndSection -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.