[Bug 33445] New: NVS 3100M : Blank screen on kernel module loading

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ@public.gmane.org]

https://bugs.freedesktop.org/show_bug.cgi?id=33445

           Summary: NVS 3100M : Blank screen on kernel module loading
           Product: xorg
           Version: unspecified
          Platform: x86-64 (AMD64)
        OS/Version: Linux (All)
            Status: NEW
          Severity: critical
          Priority: medium
         Component: Driver/nouveau
        AssignedTo: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
        ReportedBy: celelibi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
         QAContact: xorg-team-go0+a7rfsptAfugRpC6u6w@public.gmane.org


Created an attachment (id=42426)
 --> (https://bugs.freedesktop.org/attachment.cgi?id=42426)
syslog.log From boot up to modprobe nouveau

When the kernel module nouveau is loaded, it tries to set to resolution using
KMS. But it fails and only leave a blank (black) screen with backlight turned
on.

But logs just looks like everything is fine.

Here is the "lspci -vvvnns 01:00.0", and then attached syslog.log from boot up,
to "modeprobe nouveau". And then, syslogs when reloading drm with debug=6.

01:00.0 VGA compatible controller [0300]: nVidia Corporation GT218 [NVS 3100M]
[10de:0a6c] (rev a2) (prog-if 00 [VGA controller])
        Subsystem: Dell Latitude E6510 [1028:040b]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M]
        Region 5: I/O ports at 7000 [size=128]
        Expansion ROM at d3000000 [disabled] [size=512K]
        Capabilities: [60] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [78] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 <64us
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency
L0 <256ns, L1 <4us
                        ClockPM+ Surprise- LLActRep- BwNot-
                LnkCtl: ASPM L1 Enabled; RCB 128 bytes Disabled- Retrain-
CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB
        Capabilities: [b4] Vendor Specific Information: Len=14 <?>
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                        Status: NegoPending- InProgress-
        Capabilities: [128 v1] Power Budgeting <?>
        Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1
Len=024 <?>

-- 
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.