From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ@public.gmane.org
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: [Bug 34348] New: (regression/bisected) (2.6.37 nouveau/KMS) internal laptop display remains blank
Date: Wed, 16 Feb 2011 10:01:24 -0800 (PST) [thread overview]
Message-ID: <bug-34348-8800@http.bugs.freedesktop.org/> (raw)
https://bugs.freedesktop.org/show_bug.cgi?id=34348
Summary: (regression/bisected) (2.6.37 nouveau/KMS) internal
laptop display remains blank
Product: xorg
Version: unspecified
Platform: x86-64 (AMD64)
OS/Version: Linux (All)
Status: NEW
Severity: normal
Priority: medium
Component: Driver/nouveau
AssignedTo: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
ReportedBy: dragos.delcea-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
QAContact: xorg-team-go0+a7rfsptAfugRpC6u6w@public.gmane.org
Created an attachment (id=43440)
--> (https://bugs.freedesktop.org/attachment.cgi?id=43440)
2.6.37 dmesg
2.6.36 works, 2.6.37 does not; issue is that internal display on a Dell
Latitude E6510 becomes blank when KMS is loaded - X thinks everything is fine
and keeps the monitor as the primary (I also have an external 22' Dell LCD
monitor as a secondary)
bisection points to:
---
fe224bb7e12f1ea9a785ec942bc5d59950543888 is the first bad commit
commit fe224bb7e12f1ea9a785ec942bc5d59950543888
Author: Ben Skeggs <bskeggs-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Date: Mon Sep 27 08:29:33 2010 +1000
drm/nouveau: enable enhanced framing only if DP display supports it
Reported-by: Adam Jackson <ajax-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Ben Skeggs <bskeggs-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
:040000 040000 b7c4a355f61feea4e8937678b7114f10ecbde9e2
a6e97b63576d4ea0628114824e1f54ca397417e5 M drivers
---
video card is:
---
01:00.0 VGA compatible controller: nVidia Corporation GT218 [NVS 3100M] (rev
a2) (prog-if 00 [VGA controller])
Subsystem: Dell Latitude E6510
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at e0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 7000 [size=128]
Expansion ROM at e3000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1
<64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0
<256ns, L1 <4us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [b4] Vendor Specific Information <?>
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information <?>
Kernel driver in use: nouveau
Kernel modules: nouveau
---
xrandr output follows - (external monitor is connected using DVI regardless
what xrands says)
xrandr (with 2.6.37 - not working):
---
Screen 0: minimum 320 x 200, current 3280 x 1050, maximum 8192 x 8192
eDP-1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 344mm x
194mm
1600x900 60.0*+ 40.0
1152x864 60.0
1024x768 59.9
800x600 59.9
640x480 59.4
720x400 59.6
640x400 60.0
640x350 59.8
VGA-1 disconnected (normal left inverted right x axis y axis)
DP-1 connected 1680x1050+1600+0 (normal left inverted right x axis y axis)
473mm x 296mm
1680x1050 59.9*+
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
DP-2 disconnected (normal left inverted right x axis y axis)
---
xrandr (with 2.6.36 - working):
---
Screen 0: minimum 320 x 200, current 3280 x 1050, maximum 8192 x 8192
eDP-1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 344mm x
194mm
1600x900 40.0*
1152x864 39.9
1024x768 39.9
800x600 39.6
640x480 39.9
720x400 39.6
640x400 39.3
640x350 39.3
VGA-1 disconnected (normal left inverted right x axis y axis)
DP-1 connected 1680x1050+1600+0 (normal left inverted right x axis y axis)
473mm x 296mm
1680x1050 59.9*+
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
DP-2 disconnected (normal left inverted right x axis y axis)
---
--
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
next reply other threads:[~2011-02-16 18:01 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-16 18:01 bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ [this message]
[not found] ` <bug-34348-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>
2011-02-16 22:34 ` [Bug 34348] (regression/bisected) (2.6.37 nouveau/KMS) internal laptop display remains blank bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-02-17 9:39 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-02-17 13:22 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-02-21 14:38 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2013-08-18 18:10 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-34348-8800@http.bugs.freedesktop.org/ \
--to=bugzilla-daemon-cc+yj3umiyqdupfqwhejaq@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.