From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ@public.gmane.org
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: [Bug 34919] New: DVI Dock Connectors: Signal but not usable.
Date: Wed, 2 Mar 2011 05:33:46 -0800 (PST) [thread overview]
Message-ID: <bug-34919-8800@http.bugs.freedesktop.org/> (raw)
https://bugs.freedesktop.org/show_bug.cgi?id=34919
Summary: DVI Dock Connectors: Signal but not usable.
Product: xorg
Version: unspecified
Platform: Other
OS/Version: All
Status: NEW
Severity: normal
Priority: medium
Component: Driver/nouveau
AssignedTo: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
ReportedBy: kirchmeyer-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
QAContact: xorg-team-go0+a7rfsptAfugRpC6u6w@public.gmane.org
When monitor(s) plugged into DVI port(s) (any combination), the monitor stays
black as if it has a signal (no check cable message) however they are not
available to use. xrandr does not report any DVI ports. Please let me know what
further information would be useful.
VGA seems to work...
xrandr
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 8192 x 8192
LVDS-1 unknown connection (normal left inverted right x axis y axis)
1920x1200 60.0 + 59.9
1920x1080 60.0
1600x1200 59.9
1680x1050 60.0
1400x1050 60.0
1280x1024 59.9
1280x960 59.9
1152x864 60.0
1024x768 59.9
800x600 59.9
640x480 59.4
720x400 59.6
640x400 60.0
640x350 59.8
VGA-1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 434mm
x 270mm
1680x1050 59.9*+ 60.0
1280x1024 75.0 60.0
1440x900 75.0 59.9
1280x960 60.0
1152x864 75.0
1024x768 75.1 60.0
832x624 74.6
800x600 75.0 60.3 56.2
640x480 75.0 60.0
720x400 70.1
dmesg | grep drm
[drm] Initialized drm 1.1.0 20060810
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x092f00a2)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 62.92.5a.00
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01122306 0f220d00
[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 01122302 00020d00
[drm] nouveau 0000:01:00.0: Raw DCB entry 4: 02133316 0f320e00
[drm] nouveau 0000:01:00.0: Raw DCB entry 5: 02133312 00120e00
[drm] nouveau 0000:01:00.0: Raw DCB entry 6: 0000000e 00000000
[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff
[drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[drm] nouveau 0000:01:00.0: 2: 0x00005246: type 0x46 idx 2 tag 0x07
[drm] nouveau 0000:01:00.0: 3: 0x0000a346: type 0x46 idx 3 tag 0x08
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCF9A
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD4E5
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE24D
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE34B
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE5B3
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE618
[drm] nouveau 0000:01:00.0: 0xE618: Condition still not met after 20ms,
skipping following opcodes
[drm] nouveau 0000:01:00.0: 4 available performance level(s)
[drm] nouveau 0000:01:00.0: 0: memory 100MHz core 200MHz shader 400MHz voltage
850mV fanspeed 100%
[drm] nouveau 0000:01:00.0: 1: memory 301MHz core 275MHz shader 550MHz voltage
850mV fanspeed 100%
[drm] nouveau 0000:01:00.0: 2: memory 301MHz core 383MHz shader 767MHz voltage
850mV fanspeed 100%
[drm] nouveau 0000:01:00.0: 3: memory 799MHz core 550MHz shader 1375MHz voltage
1000mV fanspeed 100%
[drm] nouveau 0000:01:00.0: c: memory 300MHz core 275MHz shader 1100MHz
[drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[drm] nouveau 0000:01:00.0: Off-chip encoder 6/0 unsupported
[drm] nouveau 0000:01:00.0: Off-chip encoder 2/0 unsupported
[drm] nouveau 0000:01:00.0: Off-chip encoder 6/1 unsupported
[drm] nouveau 0000:01:00.0: Off-chip encoder 2/1 unsupported
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering
our own
[drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x60000000, bo
ffff88040d20a400
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 92
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
[drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
[drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
--
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
next reply other threads:[~2011-03-02 13:33 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-02 13:33 bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ [this message]
[not found] ` <bug-34919-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>
2011-03-02 13:42 ` [Bug 34919] DVI Dock Connectors: Signal but not usable bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-03-02 13:48 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2013-08-18 18:09 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-34919-8800@http.bugs.freedesktop.org/ \
--to=bugzilla-daemon-cc+yj3umiyqdupfqwhejaq@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.